前往化源商城
入驻化源商城

934538-12-2

934538-12-2结构式
934538-12-2结构式

化源商城直购

中文名 Umicore M42催化剂
英文名 Chloro(1,3-dimesityl-2-imidazolidinylidene)(2-{(E)-[(2-methylphen yl)imino]methyl}phenolato-κO)(3-phenyl-1H-inden-1-ylidene)rutheni um
英文别名 (1,3-Dimesityl-2-imidazolidinylidene)(3-hydroxy-2-{(Z)-[(2-methylphenyl)imino]methyl}phenyl)(3-phenyl-1H-inden-1-ylidene)ruthenium(1+) chloride
Ruthenium(1+), [1,3-bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene][3-hydroxy-2-[(Z)-[(2-methylphenyl)imino]methyl]phenyl](3-phenyl-1H-inden-1-ylidene)-, chloride (1:1)
分子式 C50H48ClN3ORu
分子量 843.459
精确质量 843.252991
PSA 62.45000
LogP 7.63850
储存条件

密封于阴凉干燥环境中

稳定性

遵照规定使用和储存则不会分解。

分子结构

1、摩尔折射率:无可用

2、 摩尔体积(cm3/mol):无可用

3、 等张比容(90.2K):无可用

4、 表面张力(dyne/cm):无可用

5、 极化率:无可用

更多

1. 性状:无可用

2. 密度(g/mL,25/4℃):无可用

3. 相对蒸汽密度(g/mL,空气=1):无可用

4. 熔点(ºC):无可用

5. 沸点(ºC,常压):无可用

6. 沸点(ºC,5.2kPa):无可用

7. 折射率:无可用

8. 闪点(ºC):无可用

9. 比旋光度(º):无可用

10. 自燃点或引燃温度(ºC):无可用

11. 蒸气压(kPa,25ºC):无可用

12. 饱和蒸气压(kPa,60ºC):无可用

13. 燃烧热(KJ/mol):无可用

14. 临界温度(ºC):无可用

15. 临界压力(KPa):无可用

16. 油水(辛醇/水)分配系数的对数值:无可用

17. 爆炸上限(%,V/V):无可用

18. 爆炸下限(%,V/V):无可用

19. 溶解性:无可用


Section 1: Product Identification
[1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene]-[2-[[(2-methylphenyl)imino]methyl]phenolyl]-[3-phenyl-1H
Chemical Name:
-inden-1-ylidene]ruthenium(II) chloride
CAS Registry Number:934538-12-2
Formula:C50H48ClN3ORu
EINECS Number:none
Chemical Family:organometallic complex
Synonym:Neolyst 42

Section 2: Composition and Information on Ingredients
IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL)
Title compound934538-12-2100%no datano data

Section 3: Hazards Identification
Emergency Overview:Irritating to skin, eyes and respiratory tract.
Primary Routes of Exposure:Ingestion, inhalation, skin, eyes
Eye Contact:Causes slight to mild irritation of the eyes.
Skin Contact:Causes slight to mild irritation of the skin.
Inhalation:Irritating to the nose, mucous membranes and respiratory tract.
Ingestion:No information available on the physiological effects of ingestion. May be harmful if swallowed.
Acute Health Affects:Irritating to skin, eyes and respiratory tract.
Chronic Health Affects:No information on long-term chronic effects.
NTP:No
IARC:No
OSHA:No

SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
Skin Exposure:
irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
Inhalation:
in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
Ingestion:
vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
Flash Point:no data
Autoignition Temperature:no data
Explosion Limits:no data
Extinguishing Medium:carbon dioxide, dry powder or foam
If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure
Special Fire Fighting Procedures:
self-contained breathing apparatus and full protective clothing.
Hazardous Combustion andIf involved in a fire this material may emit irritating fumes.
Decomposion Products:
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
Spill and Leak Procedures:Small spills can be mixed with vermiculite or sodium carbonate and swept up.

SECTION 7: Handling and Storage
Handling and Storage:Store in a tightly sealed container. Keep in a cool, dry, well ventilated place.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:Wear protective clothing and gloves.
Ventilation:Handle the material in an efficient fume hood.
If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator
Respirator:
Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation:Handle the material in an efficient fume hood.
Additional Protection:No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:red-brown solid
Molecular Weight:843.46
Melting Point:no data
Boiling Point:no data
Vapor Pressure:no data
Specific Gravity:no data
Odor:none
Solubility in Water:insoluble

SECTION 10: Stability and Reactivity
Stability:air and moisture stable
Hazardous Polymerization:no hazardous polymerization
Conditions to Avoid:none
Incompatibility:oxidizing agents, halogens and active metals
Decomposition Products:carbon monoxide, carbon dioxide, organic fumes, ruthenium oxide

SECTION 11: Toxicological Information
RTECS Data:No information available in the RTECS files.
Carcinogenic Effects:no data
Mutagenic Effects:no data
Tetratogenic Effects:no data

SECTION 12: Ecological Information
Ecological Information:No information available

SECTION 13: Disposal Considerations
Disposal:Dispose of according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):Non-hazardous
Hazard Class (CFR):NA
Additional Hazard Class (CFR):NA
Packaging Group (CFR):NA
UN ID Number (CFR):NA
Shipping Name (IATA):Non-hazardous
Hazard Class (IATA):NA
Additional Hazard Class (IATA):NA
Packaging Group (IATA):NA
UN ID Number (IATA):NA

SECTION 15: Regulatory Information
TSCA:Not listed in the TSCA inventory
SARA (Title 313):Title compound not listed
Second Ingredient:none


SECTION 16 - ADDITIONAL INFORMATION
N/A

生态学数据:

该物质对环境可能有危害,对水体应给予特别注意。