- 上海化源世纪贸易有限公司
- 上海市 上海市 普陀区
- 产品名：3-氨基-4-氯苯-1-磺酰氟
- 纯度：98.0%
- 规格：
- 联系人：徐经理
- 联系电话：13311869306
- 湖北魏氏化学试剂股份有限公司
- 湖北省 武汉市 洪山区
- 产品名：3-氨基-4-氯苯磺酰氟
- 纯度：98.0%
- 规格：5mg/25mg/10g/50g
- 联系人：张栋
- 联系电话：18717199209
查看所有供应商和价格请点击：
368-72-9
368-72-9结构式
- 常用中文名：3-氨基-4-氯苯-1-磺酰氟
- 常用英文名：Benzenesulfonylfluoride, 3-amino-4-chloro-
- CAS号：368-72-9
- 分子式：C6H5ClFNO2S
- 分子量：209.62600
- 相关类别： 化学试剂 有机试剂 磺酰卤化物
- 发布时间：2018-08-23 11:58:27
- 更新时间：2024-01-05 19:03:44
| 中文名 | 3-氨基-4-氯苯磺酰氟 |
|---|---|
| 英文名 | 3-amino-4-chlorobenzenesulfonyl fluoride |
| 中文别名 |
3-氨基-4-氯苯基磺酰氟
3-氨基-4-乱收氟化氯苯镁 |
| 英文别名 |
3-Amino-4-chlor-benzolsulfonylfluorid
3-amino-4-chloro-benzenesulfonyl fluoride 3-Amino-4-chlorobenzenesulphonyl fluoride Benzenesulfonyl fluoride,3-amino-4-chloro 3-Amino-4-chlorobenzenesulfonyl fluoride EINECS 206-710-9 |
| 密度 | 1.559 g/cm3 |
|---|---|
| 沸点 | 307.6ºC at 760 mmHg |
| 熔点 | 64-68ºC |
| 分子式 | C6H5ClFNO2S |
| 分子量 | 209.62600 |
| 闪点 | 139.8ºC |
| 精确质量 | 208.97100 |
| PSA | 68.54000 |
| LogP | 3.24240 |
| 外观性状 | 淡棕色-黄色至棕色结晶粉末 |
| 折射率 | 1.57 |
| 储存条件 | 2-8°C， 密封， 干燥 |
| 分子结构 | 1、 摩尔折射率：44.13 2、 摩尔体积（m3/mol）：134.3 3、 等张比容（90.2K）：357.4 4、 表面张力（dyne/cm）：50.0 5、 极化率（10 -24cm 3）：17.49 |
| 计算化学 | 1.疏水参数计算参考值（XlogP）:无 2.氢键供体数量:1 3.氢键受体数量:4 4.可旋转化学键数量:1 5.互变异构体数量:无 6.拓扑分子极性表面积68.5 7.重原子数量:12 8.表面电荷:0 9.复杂度:251 10.同位素原子数量:0 11.确定原子立构中心数量:0 12.不确定原子立构中心数量:0 13.确定化学键立构中心数量:0 14.不确定化学键立构中心数量:0 15.共价键单元数量:1 |
| 更多 | 一、物性数据 性状：不可用 密度（g/mL,25/4℃）：不可用 相对蒸汽密度（g/mL,空气=1）：不可用 熔点（ºC）：64-68 沸点（ºC,常压）：不可用 沸点（ºC,5.2kPa）：不可用 折射率：不可用 闪点（ºC）：不可用 比旋光度（º）：不可用 自燃点或引燃温度（ºC）：不可用 蒸气压（kPa,25ºC）：不可用 饱和蒸气压（kPa,60ºC）：不可用 燃烧热（KJ/mol）：不可用 临界温度（ºC）：不可用 临界压力（KPa）：不可用 油水（辛醇/水）分配系数的对数值：不可用 爆炸上限（%,V/V）：不可用 爆炸下限（%,V/V）：不可用 溶解性：不可用 |
Synonym:None known Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 36/37/38 Section 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Corrosive. Potential Health Effects Eye: Causes eye burns. May cause chemical conjunctivitis and corneal damage. Skin: Causes skin burns. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color. Ingestion: May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. Ingestion of large amounts of fluoride may cause salivation, nausea, vomiting, abdominal pain, fever, labored breathing. Exposure to fluoride compounds can result in systemic toxic effects on the heart, liver, and kidneys. It may also deplete calcium levels in the body leading to hypocalcemia and death. Fluoride can reduce calcium levels leading to fatal hypocalcemia. May cause systemic effects. Inhalation: May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema. Causes chemical burns to the respiratory tract. The toxicological properties of this substance have not been fully investigated. Aspiration may lead to pulmonary edema. May cause systemic effects. Can produce delayed pulmonary edema. Chronic: Chronic inhalation and ingestion may cause chronic fluoride poisoning (fluorosis) characterized by weight loss, weakness, anemia, brittle bones, and stiff joints. Effects may be delayed. Chronic exposure to fluoride compounds may cause systemic toxicity. High concentrations of fluorotrichloromethane causes narcosis and anesthesia in humans. Section 4 - FIRST AID MEASURES Eyes: Get medical aid. Do NOT allow victim to rub eyes or keep eyes closed. Extensive irrigation with water is required (at least 30 minutes). Skin: Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes. Ingestion: Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask. Notes to Physician: Treat symptomatically and supportively. Section 5 - FIRE FIGHTING MEASURES General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing Media: Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam. Section 6 - ACCIDENTAL RELEASE MEASURES General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions. Provide ventilation. Section 7 - HANDLING and STORAGE Handling: Wash thoroughly after handling. Use only in a well-ventilated area. Minimize dust generation and accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Wash clothing before reuse. Discard contaminated shoes. Storage: Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area. Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 368-72-9: United States OSHA: 2.5 mg/m3 TWA (as F) (listed under Fluorides Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use. Section 9 - PHYSICAL AND CHEMICAL PROPERTIES Physical State: Powder Color: brown Odor: none reported pH: Not available. Vapor Pressure: Not available. Viscosity: Not available. Boiling Point: Not available. Freezing/Melting Point: 62.00 - 64.00 deg C Autoignition Temperature: Not applicable. Flash Point: Not applicable. Explosion Limits, lower: Not available. Explosion Limits, upper: Not available. Decomposition Temperature: Solubility in water: Specific Gravity/Density: Molecular Formula: C6H5ClFNO2S Molecular Weight: 209.62 Section 10 - STABILITY AND REACTIVITY Chemical Stability: Stable at room temperature in closed containers under normal storage and handling conditions. Conditions to Avoid: Incompatible materials, dust generation, excess heat. Incompatibilities with Other Materials: Strong acids, strong bases, strong oxidizing agents. Hazardous Decomposition Products: Hydrogen chloride, carbon monoxide, oxides of nitrogen, irritating and toxic fumes and gases, carbon dioxide, hydrogen fluoride gas. Hazardous Polymerization: Has not been reported Section 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 368-72-9 unlisted. LD50/LC50: Not available. Carcinogenicity: 3-Amino-4-Chlorobenzenesulfonyl Fluoride - Not listed by ACGIH, IARC, or NTP. Section 12 - ECOLOGICAL INFORMATION Section 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations. Section 14 - TRANSPORT INFORMATION IATA Shipping Name: CORROSIVE SOLID, N.O.S.* Hazard Class: 8 UN Number: 1759 Packing Group: II IMO Shipping Name: CORROSIVE SOLID, N.O.S. Hazard Class: 8 UN Number: 1759 Packing Group: II RID/ADR Shipping Name: CORROSIVE SOLID, N.O.S. Hazard Class: 8 UN Number: 1759 Packing group: II Section 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives Hazard Symbols: XI Risk Phrases: R 36/37/38 Irritating to eyes, respiratory system and skin. Safety Phrases: S 24/25 Avoid contact with skin and eyes. S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S 28A After contact with skin, wash immediately with plenty of water. S 37 Wear suitable gloves. S 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). WGK (Water Danger/Protection) CAS# 368-72-9: No information available. Canada None of the chemicals in this product are listed on the DSL/NDSL list. CAS# 368-72-9 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 368-72-9 is not listed on the TSCA inventory. It is for research and development use only. SECTION 16 - ADDITIONAL INFORMATION N/A |
|
毒理学数据: 二、毒理学数据： 急性毒性：不可用。 生态学数据: 三、生态学数据： 1、其它有害作用：该物质对环境可能有危害，对水体应给予特别注意。
|
| 危害码 (欧洲) | C: Corrosive; |
|---|---|
| 风险声明 (欧洲) | R34 |
| 安全声明 (欧洲) | 45-36/37/39-26-28-27 |
| 危险品运输编码 | UN 1759 |
| 包装等级 | III |
| 海关编码 | 2921499090 |
| 海关编码 | 2921499090 |
|---|---|
| 中文概述 | 2921499090 其他芳香单胺及衍生物及它们的盐. 增值税率:17.0% 退税率:9.0% 监管条件:无 最惠国关税:6.5% 普通关税:30.0% |
| 申报要素 | 品名, 成分含量, 用途 |
| Summary | 2921499090 other aromatic monoamines and their derivatives; salts thereof VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:6.5% General tariff:30.0% |