383-07-3
383-07-3结构式
- 常用中文名：2-丙烯酸-2-[丁基[(十七氟辛基)-磺酰基]-氨基]-乙基酯
- 常用英文名：2-[butyl(1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-heptadecafluorooctylsulfonyl)amino]ethyl prop-2-enoate
- CAS号：383-07-3
- 分子式：C17H16F17NO4S
- 分子量：653.35100
- 发布时间：2018-12-26 17:50:31
- 更新时间：2024-01-09 17:05:38
| 中文名 | 2-丙烯酸-2-[丁基[(十七氟辛基)-磺酰基]-氨基]-乙基酯 |
|---|---|
| 英文名 | 2-[butyl(1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-heptadecafluorooctylsulfonyl)amino]ethyl prop-2-enoate |
| 中文别名 |
2-(N-丁基全氟辛烷磺酰胺)丙烯酸乙酯
全氟化学品单体 |
| 英文别名 |
2-{butyl[(heptadecafluorooctyl)sulfonyl]amino}ethyl acrylate
2-Propenoic acid,2(((heptadecafluorooctyl)sulfonyl)butylamino)ethyl ester 2-(N-BUTYLPERFLUOROOCTANESULFONAMIDO)ETHYL ACRYLATE STABILIZED MFCD00080736 EINECS 206-846-9 |
| 密度 | 1.522g/cm3 |
|---|---|
| 沸点 | 393.6ºC at 760 mmHg |
| 分子式 | C17H16F17NO4S |
| 分子量 | 653.35100 |
| 精确质量 | 653.05300 |
| PSA | 72.06000 |
| LogP | 7.19520 |
| 折射率 | 1.37 |
| 储存条件 | 密封储存，冷藏，储存于阴凉、干燥的库房。 |
| 稳定性 | 避免与不相容材料接触。 与强氧化剂反应。 |
| 计算化学 | 1.疏水参数计算参考值（XlogP）:7.2 2.氢键供体数量:0 3.氢键受体数量:22 4.可旋转化学键数量:16 5.互变异构体数量:无 6.拓扑分子极性表面积72.1 7.重原子数量:40 8.表面电荷:0 9.复杂度:1020 10.同位素原子数量:0 11.确定原子立构中心数量:0 12.不确定原子立构中心数量:0 13.确定化学键立构中心数量:0 14.不确定化学键立构中心数量:0 15.共价键单元数量:1 |
| 更多 | 1. 性状：棕黄色液体 2. 密度（g/mL, 25 ℃ ）：未确定 3. 相对蒸汽密度（g/mL,空气=1）：未确定 4. 熔点（ºC）：未确定 5. 沸点（ºC,常压）：未确定 6. 沸点（ºC,11.2515mmHg）：未确定 7. 折射率(n20/D)：未确定 8. 闪点（ºF）：未确定 9. 比旋光度（º）：未确定 10. 自燃点或引燃温度（ºC）：未确定 11. 蒸气压（mmHg,25ºC）：未确定 12. 饱和蒸气压（kPa,25ºC）：未确定 13. 燃烧热（KJ/mol）：未确定 14. 临界温度（ºC）：未确定 15. 临界压力（KPa）：未确定 16. 油水（辛醇/水）分配系数的对数值：未确定 17. 爆炸上限（%,V/V）：未确定 18. 爆炸下限（%,V/V）：未确定 19. 溶解性：未确定 |
Synonym:2-Propenoic acid, 2-[butyl[(heptadecafluorooctyl)sulfonyl]amino]ethyl ester; 2-[Butyl[(heptadecafluorooctyl)sulfonyl]amino]ethyl acrylate; liquid monomer for incorporating perfluoroalkyl groups in polymers Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 36/37/38 Section 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological properties of this material have not been fully investigated. Potential Health Effects Eye: May cause eye irritation. Skin: May cause skin irritation. May be harmful if absorbed through the skin. The toxicological properties of this material have not been fully investigated. Ingestion: May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated. May be harmful if swallowed. Inhalation: May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. May be harmful if inhaled. Chronic: No information found. Section 4 - FIRST AID MEASURES Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Skin: Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid. Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Notes to Physician: Section 5 - FIRE FIGHTING MEASURES General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. Polymerizes readily if not inhibited; heat can initiate reaction. Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or appropriate foam. Section 6 - ACCIDENTAL RELEASE MEASURES General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation. Do not let this chemical enter the environment. Section 7 - HANDLING and STORAGE Handling: Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Storage: Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Keep refrigerated. (Store below 4C/39F.) Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 383-07-3: Personal Protective Equipment Eyes: Wear chemical splash goggles. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use. Section 9 - PHYSICAL AND CHEMICAL PROPERTIES Physical State: Liquid Color: brown-yellow Odor: Not available. pH: Not available. Vapor Pressure: Not available. Viscosity: Not available. Boiling Point: Not available. Freezing/Melting Point: Not available. Autoignition Temperature: Not available. Flash Point: Not available. Explosion Limits, lower: Not available. Explosion Limits, upper: Not available. Decomposition Temperature: Solubility in water: Specific Gravity/Density: Molecular Formula: C17H16F17NO4S Molecular Weight: 653.35 Section 10 - STABILITY AND REACTIVITY Chemical Stability: Stable under normal temperatures and pressures. This material is a monomer and may polymerize under certain conditions if the stabilizer is lost. Conditions to Avoid: High temperatures, loss of inhibitor. Incompatibilities with Other Materials: Strong oxidizing agents, polymerizing initiators. Hazardous Decomposition Products: Nitrogen oxides, carbon monoxide, oxides of sulfur, irritating and toxic fumes and gases, carbon dioxide. Hazardous Polymerization: May occur. Section 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 383-07-3 unlisted. LD50/LC50: Not available. Carcinogenicity: 2-[Butyl[(heptadecafluorooctyl)sulfonyl]amino]ethyl acrylate - Not listed by ACGIH, IARC, or NTP. Section 12 - ECOLOGICAL INFORMATION Other No information available. Section 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations. Section 14 - TRANSPORT INFORMATION IATA Shipping Name: Not regulated. Hazard Class: UN Number: Packing Group: IMO Shipping Name: Not regulated. Hazard Class: UN Number: Packing Group: RID/ADR Shipping Name: Not regulated. Hazard Class: UN Number: Packing group: Section 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives Hazard Symbols: XI Risk Phrases: R 36/37/38 Irritating to eyes, respiratory system and skin. Safety Phrases: S 24/25 Avoid contact with skin and eyes. WGK (Water Danger/Protection) CAS# 383-07-3: No information available. Canada CAS# 383-07-3 is listed on Canada's NDSL List. CAS# 383-07-3 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 383-07-3 is listed on the TSCA inventory. SECTION 16 - ADDITIONAL INFORMATION N/A |
| 危害码 (欧洲) | Xi: Irritant; |
|---|---|
| 风险声明 (欧洲) | 36/37/38 |
| 安全声明 (欧洲) | 37/39-26 |