中文名 | 1,3-二(1-金刚烷基)咪唑-2-亚基 |
---|---|
英文名 | 1,3-bis(1-adamantyl)-2H-imidazole |
中文别名 | 1,3-双(1-金刚烷)-2-咪唑二甲苯胺 |
英文别名 |
1,3-di-1-adamantylimidazolin-2-ylidene
1,3-di-1-adamanthylimidazolin-2-ylidene |
熔点 | 240-241ºC |
---|---|
分子式 | C23H32N2 |
分子量 | 336.51400 |
精确质量 | 336.25700 |
PSA | 6.48000 |
LogP | 4.59850 |
折射率 | 1.641 |
储存条件 | 密闭于阴凉干燥环境中 |
稳定性 | 遵照规定使用和储存则不会分解。 |
分子结构 | 1、摩尔折射率:无可用 2、 摩尔体积(cm3/mol):无可用 3、 等张比容(90.2K):无可用 4、 表面张力(dyne/cm):无可用 5、 极化率:无可用 |
计算化学 | 1.疏水参数计算参考值(XlogP):无 2.氢键供体数量:无 3.氢键受体数量:无 4.可旋转化学键数量:无 5.互变异构体数量:无 6.拓扑分子极性表面积无 7.重原子数量:无 8.表面电荷:无 9.复杂度:无 10.同位素原子数量:无 11.确定原子立构中心数量:无 12.不确定原子立构中心数量:无 13.确定化学键立构中心数量:无 14.不确定化学键立构中心数量:无 15.共价键单元数量:无 |
更多 | 1. 性状:无可用 2. 密度(g/mL,25/4℃):无可用 3. 相对蒸汽密度(g/mL,空气=1):无可用 4. 熔点(ºC):240-241 5. 沸点(ºC,常压):无可用 6. 沸点(ºC,5.2kPa):无可用 7. 折射率:无可用 8. 闪点(ºC):无可用 9. 比旋光度(º):无可用 10. 自燃点或引燃温度(ºC):无可用 11. 蒸气压(kPa,25ºC):无可用 12. 饱和蒸气压(kPa,60ºC):无可用 13. 燃烧热(KJ/mol):无可用 14. 临界温度(ºC):无可用 15. 临界压力(KPa):无可用 16. 油水(辛醇/水)分配系数的对数值:无可用 17. 爆炸上限(%,V/V):无可用 18. 爆炸下限(%,V/V):无可用 19. 溶解性:无可用 |
Section 1: Product Identification Chemical Name:1,3-Bis(1-adamantyl)imidazol-2-ylidene, min. 98% ARDUENGO'S CARBENE CAS Registry Number:131042-77-8 Formula:C23H32N2 EINECS Number:None Chemical Family:organic amine Synonym:1,3-di-adamantylimidazol-2-ylidene
Section 2: Composition and Information on Ingredients IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL) Title Compound131042-77-8100%no datano data Section 3: Hazards Identification The product is an irritant to the skin, eyes, mucous membranes and upper respiratory tract. Ingestion of small Emergency Overview: amounts are harmful. Primary Routes of Exposure:Ingestion, inhalation of dust. Eyes and skin. Eye Contact:Causes moderate irritation of the eyes. Skin Contact:Causes slight to moderate irritation of the skin. Inhalation:Dust is irritating to the nose, mucous membranes and respiratory tract. Ingestion may lead to sleepiness, dizziness, abdominal cramps, vomiting, bloody diarrhea, weakness, and Ingestion: convulsions. Acute Health Affects:Irritating to skin, eyes and respiratory tract. Chronic Health Affects:No information available on long-term chronic effects. NTP:No IARC:No OSHA:No SECTION 4: First Aid Measures Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need Eye Exposure: assistance in keeping their eye lids open. Get immediate medical attention. Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if Skin Exposure: irritation persists. Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty Inhalation: in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance. Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce Ingestion: vomiting only if directed by medical personnel. SECTION 5: Fire Fighting Measures Flash Point:no data Autoignition Temperature:none Explosion Limits:none Extinguishing Medium:carbon dioxide, foam or dry powder If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure Special Fire Fighting Procedures: self- contained breathing apparatus and full protective clothing. Hazardous Combustion andIf involved in a fire this material may emit toxic fumes of nitrogen oxides. Decomposion Products: Unusual Fire or Explosion Hazards: Flammable solid. No unusual fire or explosion hazards. SECTION 6: Accidental Release Measures Small spills can be mixed with vermiculite, sodium carbonate or other suitable non combustible adsorbent and Spill and Leak Procedures: swept up. SECTION 7: Handling and Storage Handling and Storage:Store cold, in a tightly sealed container under an inert atmosphere of nitrogen or argon. SECTION 8: Exposure Controls and Personal Protection Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory. Skin Protection:Wear protective clothing and gloves. Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood. If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator Respirator: Protection Program to be in compliance with 29 CFR 1910.134. Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood. Additional Protection:No additional protection required. SECTION 9: Physical and Chemical Properties Color and Form:white xtl Molecular Weight:336.51 Melting Point:240-241°C Boiling Point:no data Vapor Pressure:no data Specific Gravity:no data Odor:none Solubility in Water:reactive in water SECTION 10: Stability and Reactivity Stability:air sensitive, moisture sensitive Hazardous Polymerization:no hazardous polymerization Conditions to Avoid:exposure to air, halogenated and acidic solvents Incompatibility:strong oxidizing agents, halogenated solvents and acidic solvents. Decomposition Products:carbon dioxide, carbon monoxide, nitrogen oxides, and organic fumes. SECTION 11: Toxicological Information RTECS Data:No information available in the RTECS files. Carcinogenic Effects:No data Mutagenic Effects:No data Tetratogenic Effects:No data SECTION 12: Ecological Information Ecological Information:No information available SECTION 13: Disposal Considerations Disposal:Dispose of according to local, state and federal regulations. SECTION 14: Transportation Shipping Name (CFR):Flammable solids, Organic, N.O.S. Hazard Class (CFR):4.1 Additional Hazard Class (CFR):NA Packaging Group (CFR):II UN ID Number (CFR):UN# 1325 Shipping Name (IATA):Flammable solid, Organic, N.O.S. Hazard Class (IATA):4.1 Additional Hazard Class (IATA):NA Packaging Group (IATA):II UN ID Number (IATA):UN# 1325 SECTION 15: Regulatory Information TSCA:Not listed in the TSCA inventory. SARA (Title 313):Title compound not listed. Second Ingredient:None SECTION 16 - ADDITIONAL INFORMATION N/A |
生态学数据: 该物质对环境可能有危害,对水体应给予特别注意。
|
上游产品 3 | |
---|---|
下游产品 0 |