前往化源商城

品牌现货直购
供应商:我要出现这里



查看所有供应商和价格请点击:

10025-90-8生产厂家

10025-90-8价格

10025-90-8

10025-90-8结构式
10025-90-8结构式

化源商城直购

中文名 三氯化镨七水
英文名 praseodymium(3+),trichloride,heptahydrate
英文别名 PRASEODYMIUM CHLORIDE HEPTAHYDRATE
PRASEODYMIUM CHLORIDE HYDRATE
praseodymiumchlorideheptahydrate99.9
PRASEODYMIUM CHLORIDE,HYDROUS
密度 2.25 g/cm3
熔点 115ºC
分子式 CH15Cl3O7
分子量 245.48500
精确质量 243.98800
PSA 64.61000
LogP 1.53630
外观性状 crystal | green
储存条件

2-8°C密闭、阴凉干燥处

稳定性

易吸湿,溶解度334g/100g H2O(13℃)。180~200℃下在HCl气流中加热可以脱掉七个水。

水溶解性 334g/100mL H2O (13°C) [CRC10]
分子结构

1、摩尔折射率:无可用的

2、摩尔体积(cm3/mol):无可用的

3、等张比容(90.2K):无可用的

4、表面张力(dyne/cm):无可用的

5、介电常数:无可用的

6、极化率(10-24cm3):无可用的

7、单一同位素质量:371.888111 Da

8、标称质量:372 Da

9、平均质量:373.3736 Da

计算化学

1.疏水参数计算参考值(XlogP):无

2.氢键供体数量:7

3.氢键受体数量:10

4.可旋转化学键数量:0

5.互变异构体数量:无

6.拓扑分子极性表面积7

7.重原子数量:11

8.表面电荷:0

9.复杂度:0

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:11

更多

1. 性状:绿色晶体

2. 密度(g/mL,25℃):2.250

3. 相对蒸汽密度(g/mL,空气=1):未确定

4. 熔点(ºC): 115

5. 沸点(ºC,常压):未确定

6. 沸点(ºC,5.2kPa):未确定

7. 折射率:未确定

8. 闪点(ºC):未确定

9. 比旋光度(º):未确定

10. 自燃点或引燃温度(ºC):未确定

11. 蒸气压(kPa,20ºC):未确定

12. 饱和蒸气压(kPa,60ºC):未确定

13. 燃烧热(KJ/mol):未确定

14. 临界温度(ºC):未确定

15. 临界压力(KPa):未确定

16. 油水(辛醇/水)分配系数的对数值:未确定

17. 爆炸上限(%,V/V):未确定

18. 爆炸下限(%,V/V):未确定

19. 溶解性:未确定


Section 1: Product Identification
Chemical Name:Praseodymium (III) chloride heptahydrate (99.9%-Pr) (REO)
CAS Registry Number:10025-90-8
Formula:PrCl3.7H2O
EINECS Number:233-794-4
Chemical Family:metal halide
Synonym:Praseodymium trichloride, hexahydrate

Section 2: Composition and Information on Ingredients
IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL)
Title Compound10025-90-8100%no datano data

Section 3: Hazards Identification
Emergency Overview:Irritating to skin and eyes. Inhalation can lead to irritation of the respiratory tract.
Primary Routes of Exposure:Ingestion, inhalation
Eye Contact:Causes mild irritation to the eyes.
Skin Contact:Causes slight irritation of the skin.
Inhalation:Inhalation of dust can lead to irritation of the respiratory tract.
Ingestion:No information is available on the physiological effects of ingestion in humans
Acute Health Affects:Irritating to skin and eyes.
Chronic Health Affects:No information available on long-term chronic effects.
NTP:No
IARC:No
OSHA:No

SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
Skin Exposure:
irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
Inhalation:
in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
Ingestion:
vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
Flash Point:not applicable
Autoignition Temperature:none
Explosion Limits:none
Extinguishing Medium:Material is non-flammable.
Special Fire Fighting Procedures:No special fire fighting procedures required.
Hazardous Combustion andnone
Decomposion Products:
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
Spill and Leak Procedures:Small spills can be mixed with vermiculite or sodium carbonate powder and swept up.

SECTION 7: Handling and Storage
Handling and Storage:Store material in a tightly sealed container.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:Wear appropriate chemical resistant gloves and protective clothing.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
If ventilation is not available, a respirator should be worn. The use of respirators requires a Respiratory
Respirator:
Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
Additional Protection:No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:green xtl.
Molecular Weight:247.27(373.38)
Melting Point:115°
Boiling Point:no data
Vapor Pressure:no data
Specific Gravity:2.25
Odor:none
Solubility in Water:

SECTION 10: Stability and Reactivity
Stability:hygroscopic
Hazardous Polymerization:no hazardous polymerization
Conditions to Avoid:none
Incompatibility:Active metals
Decomposition Products:none

SECTION 11: Toxicological Information
RTECS Data:No information available in the RTECS files.
Carcinogenic Effects:No data available
Mutagenic Effects:No data available
Tetratogenic Effects:No data available

SECTION 12: Ecological Information
Ecological Information:No information available

SECTION 13: Disposal Considerations
Disposal:Dispose of according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):Non-hazardous
Hazard Class (CFR):NA
Additional Hazard Class (CFR):NA
Packaging Group (CFR):NA
UN ID Number (CFR):NA
Shipping Name (IATA):Non-hazardous
Hazard Class (IATA):NA
Additional Hazard Class (IATA):NA
Packaging Group (IATA):NA
UN ID Number (IATA):NA

SECTION 15: Regulatory Information
TSCA:Not listed in the TSCA inventory
SARA (Title 313):Title compound not listed.
Second Ingredient:none


SECTION 16 - ADDITIONAL INFORMATION
N/A
危害码 (欧洲) Xi: Irritant;
风险声明 (欧洲) R36/37/38
安全声明 (欧洲) 26-36-37/39
RTECS号 TU0175000
海关编码 28469025

适量镨氧化物溶解于过量的2mol/L HCl中,煮沸使进一步浓缩后,在盛无水硫酸钙的保干器中放置数星期后析出晶体。