4-(4-fluorobenzoyl)piperidine p-toluenesulfonate

Modify Date: 2024-01-07 18:04:25

4-(4-fluorobenzoyl)piperidine p-toluenesulfonate Structure
4-(4-fluorobenzoyl)piperidine p-toluenesulfonate structure
Common Name 4-(4-fluorobenzoyl)piperidine p-toluenesulfonate
CAS Number 132442-43-4 Molecular Weight 379.44600
Density N/A Boiling Point 323.2ºC at 760 mmHg
Molecular Formula C19H22FNO4S Melting Point 187-189.2ºC
MSDS N/A Flash Point 149.3ºC

 Names

Name 4-(4-fluorobenzoyl)piperidine p-toluenesulfonate
Synonym More Synonyms

 Chemical & Physical Properties

Boiling Point 323.2ºC at 760 mmHg
Melting Point 187-189.2ºC
Molecular Formula C19H22FNO4S
Molecular Weight 379.44600
Flash Point 149.3ºC
Exact Mass 379.12500
PSA 91.85000
LogP 4.65930
Vapour Pressure 0.000266mmHg at 25°C

 MSDS

Name: 4-(4-Fluorobenzoyl)Piperidine P-Toluenesulfonate, Contains HCl Salt, Material Safety Data Sheet
Synonym: None Known.
CAS: 132442-43-4
Section 1 - Chemical Product MSDS Name: 4-(4-Fluorobenzoyl)Piperidine P-Toluenesulfonate, Contains HCl Salt, Material Safety Data Sheet
Synonym: None Known.
SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
132442-43-4 4-(4-Fluorobenzoyl)Piperidine P-Toluen 95 unlisted
Hazard Symbols: XN
Risk Phrases: 20
SECTION 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW Harmful by inhalation.The toxicological properties of this material have not been fully investigated. Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. May be harmful if inhaled.
Chronic:
No information found.
SECTION 4 - FIRST AID MEASURES
Eyes:
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:


SECTION 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Runoff from fire control or dilution water may cause pollution.
Extinguishing Media:
Use agent most appropriate to extinguish fire.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions. Provide ventilation.
SECTION 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels. Exposure Limits CAS# 132442-43-4: Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Powder
Color: off-white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 187.00 - 189.20 deg C
Autoignition Temperature: 430 deg C ( 806.00 deg F)
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: 0.98 g/100ml (20 c)
Specific Gravity/Density:
Molecular Formula: C19H22FNO4S
Molecular Weight: 379.44
SECTION 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, sulfur oxides (SOx), including sulfur oxide and sulfur dioxide, hydrogen fluoride gas.
Hazardous Polymerization: Has not been reported
SECTION 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 132442-43-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-(4-Fluorobenzoyl)Piperidine P-Toluenesulfonate - Not listed by ACGIH, IARC, or NTP.
SECTION 12 - ECOLOGICAL INFORMATION
SECTION 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations.
SECTION 14 - TRANSPORT INFORMATION IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:


SECTION 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20 Harmful by inhalation.
Safety Phrases:
S 9 Keep container in a well-ventilated place. S 24/25 Avoid contact with skin and eyes. S 28B After contact with skin, wash immediately with plenty of water and soap. WGK (Water Danger/Protection) CAS# 132442-43-4: No information available. Canada None of the chemicals in this product are listed on the DSL/NDSL list. CAS# 132442-43-4 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 132442-43-4 is not listed on the TSCA inventory. It is for research and development use only.
SECTION 16 - ADDITIONAL INFORMATION
MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003 The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no way shall the company be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if the company has been advised of the possibility of such damages.

SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Hazard Codes Xn
Risk Phrases R20
Safety Phrases S9

 Synonyms

4-(4-Fluorobenzoyl)piperidine p-toluenesulfonate,contains HCl-salt 5GR
4-(4-Fluorobenzoyl)piperidine p-toluenesulfonate
4-(4-Fluorobenzoyl)piperidine 4-toluenesulfonate
4-(4-Fluorobenzoyl)piperidine p-toluenesulfonate,contains HCl-salt
4-(4-Fluorobenzoyl)piperidinium tosylate.