High concentration aqueous sodium fluoride certified reference materials for forensic use certified by complexometric titration.

Marcellé Archer, Martin Brits, Désirée Prevoo-Franzsen, Laura Quinn

Index: Anal. Bioanal. Chem 407(11) , 3205-9, (2015)

Full Text: HTML

Abstract

Sodium fluoride in concentrations of 1 to 2 % is used to prevent the formation of ethanol in blood and urine samples that are to be analysed for ethanol content. The majority of such samples form part of forensic investigations into alleged drunken driving. In South Africa, the laboratory performing the tests is required to prove that the sodium fluoride concentration in the blood samples is above 1 g/100 ml on receipt. This is done by using a fluoride ion-selective electrode calibrated with external aqueous solutions of sodium fluoride. The National Metrology Institute of South Africa (NMISA) prepares sodium fluoride solutions in concentrations from 0.3 to 3.0 g/100 ml. No other certified sodium fluoride reference solutions in these concentrations are available commercially. The sodium fluoride is certified by precipitation of the fluoride as lead chlorofluoride (PbClF) through the addition of a known excess of lead nitrate. The excess lead is back-titrated with ethylenediamine tetraacetic acid (EDTA) using a photometric electrode to detect the endpoint. Aqueous sodium fluoride solutions are prepared and the concentrations verified by the precipitation/back-titration method. This paper shows the application of a classical complexometric method to the certification of reference materials and describes the procedures for the preparation of the sodium fluoride solutions, verification of the concentrations, homogeneity and stability by primary titrimetry. It also briefly covers the calculation of uncertainty, the establishment of traceability and the quality control measures applied to ensure the quality of the certified reference materials (CRMs).