34872-98-5
34872-98-5 structure
- Name: molybdenum (vi) dioxide bis(2,2,6,6-tetramethyl-3,5-heptanedionate)
- Chemical Name: molybdenum (vi) dioxide bis(2,2,6,6-tetramethyl-3,5-heptanedionate)
- CAS Number: 34872-98-5
- Molecular Formula: C22H38MoO6
- Molecular Weight: 494.49400
- Create Date: 2017-10-17 01:18:13
- Modify Date: 2024-01-09 12:00:54
| Name | molybdenum (vi) dioxide bis(2,2,6,6-tetramethyl-3,5-heptanedionate) |
|---|---|
| Synonyms |
Bis-(2,2,6,6-tetramethyl-3,5-heptanedionato-O,O')-molybdenum dioxide
MOLYBDENUM(VI) OXIDE BIS(2,2,6,6-TETRAMETHYL-3,5-HEPTANEDIONATE) Molybdenumdioxidebistetramethylheptanedionatem Molybdenum(VI)dioxidebis(2,2,6,6-tetramethyl-3,5-heptanedionate),min.[O2Mo(TMHD)2] |
| Melting Point | 129-131ºC |
|---|---|
| Molecular Formula | C22H38MoO6 |
| Molecular Weight | 494.49400 |
| Exact Mass | 496.17200 |
| PSA | 86.74000 |
| LogP | 5.78740 |
|
Section 1: Product Identification Chemical Name:Molybdenum (VI) dioxide bis(2,2,6,6-tetramethyl-3,5-heptanedionate), min. 98% [O2Mo(TMHD)2] CAS Registry Number:34872-98-5 Formula:MoO2(C11H19O2)2 EINECS Number:none Chemical Family:metal beta-diketonate complexes Synonym:Molybdenum oxo TMHD
Section 2: Composition and Information on Ingredients IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL) Title Compound34872-98-5100%10mg/m3 (as15mg/m3 (as Section 3: Hazards Identification Emergency Overview:No particular hazard associated with this material. Primary Routes of Exposure:Ingestion, Inhalation of dust. Eye Contact:May cause slight to mild irritation of the eyes. Skin Contact:May cause slight to mild irritation of the skin. Inhalation:Dust may be irritating to the nose, mucous membranes and respiratory tract. Ingestion:No information on the physiological effects of ingestion. Acute Health Affects:May be irritating to skin, eyes and respiratory tract. Chronic Health Affects:No information available on long-term chronic effects. NTP:No IARC:No OSHA:No SECTION 4: First Aid Measures Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need Eye Exposure: assistance in keeping their eye lids open. Get immediate medical attention. Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if Skin Exposure: irritation persists. Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty Inhalation: in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance. Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce Ingestion: vomiting only if directed by medical personnel. SECTION 5: Fire Fighting Measures Flash Point:not applicable Autoignition Temperature:none Explosion Limits:none Extinguishing Medium:carbon dioxide, dry powder or foam If involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained Special Fire Fighting Procedures: breathing apparatus and full protective clothing. Hazardous Combustion andIf involved in a fire this material may emit toxic organic fumes. Decomposion Products: Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards. SECTION 6: Accidental Release Measures Spill and Leak Procedures:Small spills can be mixed with vermiculite or sodium carbonate and swept up. SECTION 7: Handling and Storage Handling and Storage:Store in a sealed container. Keep away from heat and moisture. SECTION 8: Exposure Controls and Personal Protection Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory. Skin Protection:Wear appropriate chemical resistant gloves and protective clothing. Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood. If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators Respirator: requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134. Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood. Additional Protection:No additional protection required. SECTION 9: Physical and Chemical Properties Color and Form:yellow xtl. Molecular Weight:494.48 Melting Point:129-131° Boiling Point:no data Vapor Pressure:no data Specific Gravity:no data Odor:none Solubility in Water:insoluble SECTION 10: Stability and Reactivity Stability:moisture sensitive solid Hazardous Polymerization:no hazardous polymerization Conditions to Avoid:none Incompatibility:none Decomposition Products:Carbon dioxide, carbon monoxide, organic vapors, soot, and metal oxides and carbonates. SECTION 11: Toxicological Information RTECS Data:No information available in the RTECS files. Carcinogenic Effects:No data available Mutagenic Effects:No data available Tetratogenic Effects:No data available SECTION 12: Ecological Information Ecological Information:No information available SECTION 13: Disposal Considerations Disposal:Dispose of according to local, state and federal regulations. SECTION 14: Transportation Shipping Name (CFR):Non-hazardous Hazard Class (CFR):NA Additional Hazard Class (CFR):NA Packaging Group (CFR):NA UN ID Number (CFR):NA Shipping Name (IATA):Non-hazardous Hazard Class (IATA):NA Additional Hazard Class (IATA):NA Packaging Group (IATA):NA UN ID Number (IATA):NA SECTION 15: Regulatory Information TSCA:Not listed in the TSCA inventory. SARA (Title 313):Title compound not listed. Second Ingredient:none SECTION 16 - ADDITIONAL INFORMATION N/A |
| Risk Phrases | R36/37/38 |
|---|---|
| Safety Phrases | 26-36/37/39 |