906478-91-9

Revision number:1

---

Section2. HAZARDS IDENTIFICATION
Classification of the GHS
Not classified
PHYSICAL HAZARDS
HEALTH HAZARDS
Category 2
Skin corrosion/irritation
Serious eye damage/eye irritationCategory 2A
Not classified
ENVIRONMENTAL HAZARDS
GHS label elements
Pictograms or hazard symbols
Signal wordWarning
Causes skin irritation
Hazard statement
Causes serious eye irritation
Precautionary statements
[Prevention]Wash hands thoroughly after handling.
Wear protective gloves/eye protection/face protection.
[Response]IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
IF ON SKIN: Gently wash with plenty of soap and water.
If skin irritation occurs: Get medical advice/attention.
Take off contaminated clothing and wash before reuse.

---

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance
Substance/mixture:
Component(s):Amyltriethylammonium Bis(trifluoromethanesulfonyl)imide
>98.0%(N)
Percent:
CAS Number:906478-91-9
Triethylpentylammonium Bis(trifluoromethanesulfonyl)imide
Synonyms:
Chemical Formula:C13H26F6N2O4S2

---

Section4. FIRST AID MEASURES
Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Get medical advice/attention if you feel unwell.
Amyltriethylammonium
Bis(trifluoromethanesulfonyl)imide

---

Section4. FIRST AID MEASURES
Skin contact:Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
soap and water. If skin irritation or rash occurs: Get medical advice/attention.
Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. If eye irritation persists: Get medical
advice/attention.
Ingestion:Get medical advice/attention if you feel unwell. Rinse mouth.
A rescuer should wear personal protective equipment, such as rubber gloves and air-
Protection of first-aiders:
tight goggles.

---

Section5. FIRE-FIGHTING MEASURES
Suitable extinguishingDry chemical, foam, water spray, carbon dioxide.
media:
Specific hazards:Take care as it may decompose upon combustion or in high temperatures to
generate poisonous fume.
Specific methods:Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Remove movable
containers if safe to do so.
Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment.
equipment for firefighters:

---

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions,Use personal protective equipment. Keep people away from and upwind of spill/leak.
protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled
emergency procedures: around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust).
containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected
up: material should be promptly disposed of, in accordance with appropriate laws and
regulations.

---

Section7. HANDLING AND STORAGE
Handling
Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment.
Prevent generation of vapor or mist. Wash hands and face thoroughly after handling.
Use a ventilation, local exhaust if vapor or aerosol will be generated.
Advice on safe handling:Avoid contact with skin, eyes and clothing.
Storage
Storage conditions:Keep container tightly closed. Store in a cool and dark place.
Store away from incompatible materials such as oxidizing agents.
Packaging material:Law is followed.

---

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls:Install a closed system or local exhaust as possible so that workers should not be
exposed directly. Also install safety shower and eye bath.
Personal protective equipment
Respiratory protection: Vapor respirator. Follow local and national regulations.
Hand protection:Protective gloves.
Eye protection:Safety glasses. A face-shield, if the situation requires.
Skin and body protection: Protective clothing. Protective boots, if the situation requires.

---

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Liquid
Physical state (20°C):
Form:clear
Color:Pale yellow - Yellow
Amyltriethylammonium
Bis(trifluoromethanesulfonyl)imide

---

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Odor:No data available
pH: No data available
Melting point/freezing point:No data available
Boiling Point/Range:No data available
Flash Point:No data available
Explosive limits
Lower:No data available
No data available
Upper:
Density:1.32
Solubility:No data available

---

Section10. STABILITY AND REACTIVITY
Stability:Stable under proper conditions.
Reactivity:No special reactivity has been reported.
Incompartible materials: oxidizing agents
Hazardous Decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx), Hydrogen fluoride,
Sulphur oxides
Products:

---

Section11. TOXICOLOGICAL INFORMATION
Acute Toxicity:No data available
Skin corrosion/irritation: No data available
Serious eyeNo data available
damage/irritation:
Germ cell mutagenicity: No data available
Carcinogenicity:
IARC =No data available
No data available
NTP =
Reproductive toxicity:No data available

---

Section12. ECOLOGICAL INFORMATION
Ecotoxicity:
Fish:No data available
Crustacea:No data available
Algae:No data available
Persistence / degradability: No data available
No data available
Bioaccumulative
potential(BCF):
Mobillity in soil
log Pow:No data available
Soil adsorption (Koc):No data available
Henry's LawNo data available
constant(PaM3/mol):

---

Section13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. Observe all federal, state and local
regulations when disposing of the substance.

---

Section14. TRANSPORT INFORMATION
Hazards Class:Does not correspond to the classification standard of the United Nations
UN-No:Not Listed

---

Section15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26,
2002): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were
prescribed.
Amyltriethylammonium
Bis(trifluoromethanesulfonyl)imide

---

SECTION 16 - ADDITIONAL INFORMATION
N/A