2-methylthiolane 1,1-dioxide

Modify Date: 2024-01-14 01:13:04

2-methylthiolane 1,1-dioxide Structure
2-methylthiolane 1,1-dioxide structure
Common Name 2-methylthiolane 1,1-dioxide
CAS Number 1003-46-9 Molecular Weight 134.19700
Density 1.164g/cm3 Boiling Point 278.9ºC at 760 mmHg
Molecular Formula C5H10O2S Melting Point N/A
MSDS N/A Flash Point N/A

 Names

Name 2-methylthiolane 1,1-dioxide
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.164g/cm3
Boiling Point 278.9ºC at 760 mmHg
Molecular Formula C5H10O2S
Molecular Weight 134.19700
Exact Mass 134.04000
PSA 42.52000
LogP 1.66430
Vapour Pressure 0.00704mmHg at 25°C
Index of Refraction 1.466

 MSDS

Version 1.1
Regulation (EC) No 1907/2006

1 - Product and Company Information

Product Name2-METHYLTETRAHYDROTHIOPHENE 1, - 250 MG
1-DIOXIDE

2 - Hazards Identification

SPECIAL INDICATION OF HAZARDS TO HUMANS AND THE ENVIRONMENT
Harmful if swallowed.

3 - Composition/Information on Ingredients

Product NameCAS #EC noAnnex I
Index Number
2-METHYLTETRAHYDROTHIOPHENE1003-46-9 NoneNone
1,1-DIOXIDE
FormulaC5H10O2S
Molecular Weight 134,2000 AMU

4 - First Aid Measures

AFTER INHALATION
If inhaled, remove to fresh air. If not breathing give
artificial respiration. If breathing is difficult, give oxygen.
AFTER SKIN CONTACT
In case of skin contact, flush with copious amounts of water for
at least 15 minutes. Remove contaminated clothing and shoes.
Call a physician.
AFTER EYE CONTACT
In case of contact with eyes, flush with copious amounts of
water for at least 15 minutes. Assure adequate flushing by
separating the eyelids with fingers. Call a physician.
AFTER INGESTION
If swallowed, wash out mouth with water provided person is
conscious. Call a physician.

ALDRICHwww.molbase.com
5 - Fire Fighting Measures

EXTINGUISHING MEDIA
Suitable: Water spray. Carbon dioxide, dry chemical powder, or
appropriate foam.
SPECIAL RISKS
Specific Hazard(s): Emits toxic fumes under fire conditions.
SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing
to prevent contact with skin and eyes.

6 - Accidental Release Measures

PERSONAL PRECAUTION PROCEDURES TO BE FOLLOWED IN CASE OF LEAK OR SPILL
Evacuate area.
PROCEDURE(S) OF PERSONAL PRECAUTION(S)
Wear self-contained breathing apparatus, rubber boots, and heavy
rubber gloves.
METHODS FOR CLEANING UP
Absorb on sand or vermiculite and place in closed containers for
disposal. Ventilate area and wash spill site after material
pickup is complete.

7 - Handling and Storage

HANDLING
Directions for Safe Handling: Do not breathe vapor. Avoid
contact with eyes, skin, and clothing. Avoid prolonged or
repeated exposure.
STORAGE
Conditions of Storage: Keep tightly closed.

8 - Exposure Controls / Personal Protection

ENGINEERING CONTROLS
Use only in a chemical fume hood. Safety shower and eye bath.
GENERAL HYGIENE MEASURES
Wash thoroughly after handling.
PERSONAL PROTECTIVE EQUIPMENT
Respiratory Protection: Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US)
or CEN (EU). Where risk assessment shows air-purifying respirators
are appropriate use a full-face respirator with multi-purpose
combination (US) or type ABEK (EN 14387) respirator cartridges as
a backup to engineering controls. If the respirator is the sole
means of protection, use a full-face supplied air respirator.
Hand Protection: Compatible chemical-resistant gloves.
Eye Protection: Chemical safety goggles.

9 - Physical and Chemical Properties

AppearancePhysical State: Liquid
ALDRICHwww.molbase.com
PropertyValueAt Temperature or Pressure
pH N/A
BP/BP RangeN/A
MP/MP RangeN/A
Flash PointN/A
FlammabilityN/A
Autoignition TempN/A
Oxidizing Properties N/A
Explosive Properties N/A
Explosion LimitsN/A
Vapor PressureN/A
Partition Coefficient Log Kow: 0,015
ViscosityN/A
Vapor DensityN/A
Saturated Vapor Conc. N/A
Evaporation RateN/A
Bulk DensityN/A
Decomposition Temp.N/A
Solvent ContentN/A
Water ContentN/A
Surface TensionN/A
ConductivityN/A
Miscellaneous DataN/A
SolubilityN/A

10 - Stability and Reactivity

STABILITY
Stable: Stable.
Materials to Avoid: Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS
Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide,
Sulfur oxides.
HAZARDOUS POLYMERIZATION
Hazardous Polymerization: Will not occur

11 - Toxicological Information

SIGNS AND SYMPTOMS OF EXPOSURE
To the best of our knowledge, the chemical, physical, and
toxicological properties have not been thoroughly investigated.
ROUTE OF EXPOSURE
Skin Contact: May cause skin irritation.
Skin Absorption: May be harmful if absorbed through the skin.
Eye Contact: Causes eye irritation.
Inhalation: Material may be irritating to mucous membranes and
upper respiratory tract. May be harmful if inhaled.
Ingestion: Harmful if swallowed.

12 - Ecological Information

No data available.

13 - Disposal Considerations

SUBSTANCE DISPOSAL
ALDRICHwww.molbase.com
Contact a licensed professional waste disposal service to dispose
of this material. Dissolve or mix the material with a combustible
solvent and burn in a chemical incinerator equipped with an
afterburner and scrubber. Observe all federal, state, and local
environmental regulations.

14 - Transport Information

RID/ADR
Non-hazardous for road transport.
IMDG
Non-hazardous for sea transport.
IATA
Non-hazardous for air transport.

15 - Regulatory Information

CLASSIFICATION AND LABELING ACCORDING TO EU DIRECTIVES
INDICATION OF DANGER: Xn
Harmful.
R-PHRASES: 22
Harmful if swallowed.
Caution: Substance not yet fully tested (EU).

16 - Other Information

WARRANTY
The above information is believed to be correct but does not
purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our
knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Inc.,
shall not be held liable for any damage resulting from handling or
from contact with the above product. See reverse side of invoice
or packing slip for additional terms and conditions of sale.
Copyright 2010 Co. License granted to make
unlimitedpaper copies for internal use only.
DISCLAIMER
For R&D use only. Not for drug, household or other uses.
ALDRICHwww.molbase.com


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

HS Code 2934999090

 Customs

HS Code 2934999090
Summary 2934999090. other heterocyclic compounds. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0%

 Synonyms

methyl sulfolane
2-Methyl-tetrahydro-thiophen-1,1-dioxid
2-methyl-thiolane-1,1-dioxide
2-methyl sulfolane
Thiophene,tetrahydro-2-methyl-,1,1-dioxide
2-Methyltetrahydrothiophene 1,1-dioxide
2-Methyl-tetramethylensulfon
2-Methylthiolane,S,S-dioxide
Top Suppliers:I want be here

Get all suppliers and price by the below link:

2-methylthiolane 1,1-dioxide suppliers

2-methylthiolane 1,1-dioxide price