Methoxyacetaldehyde

require a registration or the registration is envisaged for a later
registration deadline.
CAS-No.: 10312-83-1

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Flammable liquids (Category 2), H225
Acute toxicity, Oral (Category 4), H302
Acute toxicity, Dermal (Category 4), H312
Eye irritation (Category 2), H319
Skin sensitisation (Category 1), H317
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Xn HarmfulR22, R36, R43
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal wordDanger
Hazard statement(s)
Highly flammable liquid and vapour.
H302 + H312Harmful if swallowed or in contact with skin
May cause an allergic skin reaction.
Causes serious eye irritation.
Precautionary statement(s)
Keep away from heat, hot surfaces, sparks, open flames and other
ignition sources. No smoking.
Wear protective gloves/ protective clothing.
P305 + P351 + P338IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazardnone
Statements
Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

---

SECTION 3: Composition/information on ingredients
Substances
Formula: C3H6O2
Molecular weight: 74,08 g/mol
CAS-No.: 10312-83-1
EC-No.: 233-693-5
Hazardous ingredients according to Regulation (EC) No 1272/2008
ComponentClassificationConcentration
Methoxyacetaldehyde
CAS-No.10312-83-1Flam. Liq. 2; Acute Tox. 4; Eye <= 100 %
EC-No.233-693-5Irrit. 2; Skin Sens. 1; H225,
H302 + H312, H317, H319
Hazardous ingredients according to Directive 1999/45/EC
ComponentClassificationConcentration
Methoxyacetaldehyde
CAS-No.10312-83-1Xn, R22 - R36 - R43<= 100 %
EC-No.233-693-5
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
No data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
No data available
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
Use water spray to cool unopened containers.

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation.
Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to
form explosive concentrations. Vapours can accumulate in low areas.
For personal protection see section 8.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and
place in container for disposal according to local regulations (see section 13).
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic
charge.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Storage class (TRGS 510): Flammable liquids
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, Flame retardant antistatic protective clothing., The
type of protective equipment must be selected according to the concentration and amount of the
dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type AXBEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) AppearanceForm: liquid
b) OdourNo data available
c) Odour ThresholdNo data available
d) pHNo data available
e) Melting point/freezingNo data available
point
f) Initial boiling point and No data available
boiling range
g) Flash pointNo data available
h) Evaporation rateNo data available
i) Flammability (solid, gas) No data available
j) Upper/lowerNo data available
flammability or
explosive limits
k) Vapour pressureNo data available
l) Vapour densityNo data available
m) Relative densityNo data available
n) Water solubilityNo data available
o) Partition coefficient: n- log Pow: -0,028
octanol/water
p) Auto-ignitionNo data available
temperature
q) DecompositionNo data available
temperature
r) ViscosityNo data available
s) Explosive propertiesNo data available
t) Oxidizing propertiesNo data available
Other safety information
No data available

---

SECTION 10: Stability and reactivity
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
Heat, flames and sparks.
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - No data available
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
No data available
LD50 Dermal - Rabbit - 1.170 mg/kg
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
Germ cell mutagenicity
No data available
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: AB2940000
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

---

SECTION 12: Ecological information
Toxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other adverse effects
No data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting
as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal
company.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: 1989IMDG: 1989IATA: 1989
UN proper shipping name
ADR/RID: ALDEHYDES, N.O.S. (Methoxyacetaldehyde)
IMDG: ALDEHYDES, N.O.S. (Methoxyacetaldehyde)
IATA:Aldehydes, n.o.s. (Methoxyacetaldehyde)
Transport hazard class(es)
ADR/RID: 3IMDG: 3IATA: 3
Packaging group
ADR/RID: IIIMDG: IIIATA: II
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
No data available

---

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available
Chemical Safety Assessment

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

DATA ITEMS CITED :

11

MOLECULAR FORMULA :

C3-H6-O2

MOLECULAR WEIGHT :

74.09

WISWESSER LINE NOTATION :

VH1O1

HEALTH HAZARD DATA

ACUTE TOXICITY DATA

TYPE OF TEST :

LD50 - Lethal dose, 50 percent kill

ROUTE OF EXPOSURE :

Oral

SPECIES OBSERVED :

Rodent - rat

DOSE/DURATION :

2330 mg/kg

TOXIC EFFECTS :

Details of toxic effects not reported other than lethal dose value

TYPE OF TEST :

LDLo - Lowest published lethal dose

ROUTE OF EXPOSURE :

Intraperitoneal

SPECIES OBSERVED :

Rodent - rat

DOSE/DURATION :

487 mg/kg

TOXIC EFFECTS :

Details of toxic effects not reported other than lethal dose value

TYPE OF TEST :

LD50 - Lethal dose, 50 percent kill

ROUTE OF EXPOSURE :

Administration onto the skin

SPECIES OBSERVED :

Rodent - rabbit

DOSE/DURATION :

1170 mg/kg

TOXIC EFFECTS :

Details of toxic effects not reported other than lethal dose value

TYPE OF TEST :

TDLo - Lowest published toxic dose

ROUTE OF EXPOSURE :

Oral

DOSE :

974 mg/kg

SEX/DURATION :

male 1 day(s) pre-mating

TOXIC EFFECTS :

Reproductive - Paternal Effects - testes, epididymis, sperm duct

TYPE OF TEST :

TDLo - Lowest published toxic dose

ROUTE OF EXPOSURE :

Intraperitoneal

DOSE :

487 mg/kg

SEX/DURATION :

male 1 day(s) pre-mating

TOXIC EFFECTS :

Reproductive - Paternal Effects - testes, epididymis, sperm duct

MUTATION DATA

TYPE OF TEST :

Mutation in mammalian somatic cells

TEST SYSTEM :

Rodent - hamster Ovary

DOSE/DURATION :

5 mmol/L

REFERENCE :

MUREAV Mutation Research. (Elsevier Science Pub. B.V., POB 211, 1000 AE Amsterdam, Netherlands) V.1- 1964- Volume(issue)/page/year: 334,341,1995