2-(4-chlorophenylthio)benzaldehyde

Modify Date: 2024-01-20 00:35:20

2-(4-chlorophenylthio)benzaldehyde Structure
2-(4-chlorophenylthio)benzaldehyde structure
Common Name 2-(4-chlorophenylthio)benzaldehyde
CAS Number 107572-07-6 Molecular Weight 248.72800
Density 1.31 g/cm3 Boiling Point 102-104°C 14mm
Molecular Formula C13H9ClOS Melting Point 71-74°C
MSDS N/A Flash Point 102-104°C/14mm

 Names

Name 2-(4-chlorophenyl)sulfanylbenzaldehyde
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.31 g/cm3
Boiling Point 102-104°C 14mm
Melting Point 71-74°C
Molecular Formula C13H9ClOS
Molecular Weight 248.72800
Flash Point 102-104°C/14mm
Exact Mass 248.00600
PSA 42.37000
LogP 4.30370
Vapour Pressure 1.12E-05mmHg at 25°C
Index of Refraction 1.654

 MSDS

Name: 2-[(4-Chlorophenyl)thio]benzaldehyde 95+% Material Safety Data Sheet
Synonym:
CAS: 107572-07-6
Section 1 - Chemical Product MSDS Name:2-[(4-Chlorophenyl)thio]benzaldehyde 95+% Material Safety Data Sheet
Synonym:

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
107572-07-6 2-[(4-Chlorophenyl)thio]benzaldehyde 95+% unlisted
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Air sensitive.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if swallowed.
Inhalation:
May cause respiratory tract irritation. May be harmful if inhaled.
Chronic:
Not available.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container.

Section 7 - HANDLING and STORAGE
Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Store under an inert atmosphere.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 107572-07-6: Personal Protective Equipment Eyes: Not available.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: pale yellow
Odor: odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 102 - 104 deg C @14mmHg
Freezing/Melting Point: 72 - 75 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density:
Molecular Formula: C13H9ClOS
Molecular Weight: 249

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials, exposure to air.
Incompatibilities with Other Materials:
Strong oxidizing agents, reducing agents, amines.
Hazardous Decomposition Products:
Hydrogen chloride, chlorine, carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 107572-07-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-[(4-Chlorophenyl)thio]benzaldehyde - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 107572-07-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 107572-07-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 107572-07-6 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Risk Phrases R36/37/38:Irritating to eyes, respiratory system and skin .
Safety Phrases S26-S36
HS Code 2930909090

 Customs

HS Code 2930909090
Summary 2930909090. other organo-sulphur compounds. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0%

 Synonyms

2-[(4-Chlorophenyl)thio]benzaldehyde
MFCD00051766
Top Suppliers:I want be here


Get all suppliers and price by the below link:

2-(4-chlorophenylthio)benzaldehyde suppliers

2-(4-chlorophenylthio)benzaldehyde price