N-(4-Acetylphenyl)maleimide structure
|
Common Name | N-(4-Acetylphenyl)maleimide | ||
---|---|---|---|---|
CAS Number | 1082-85-5 | Molecular Weight | 215.205 | |
Density | 1.3±0.1 g/cm3 | Boiling Point | 403.6±28.0 °C at 760 mmHg | |
Molecular Formula | C12H9NO3 | Melting Point | 153-156 °C | |
MSDS | N/A | Flash Point | 195.6±16.4 °C |
Name | n-(4-acetylphenyl)maleimide |
---|---|
Synonym | More Synonyms |
Density | 1.3±0.1 g/cm3 |
---|---|
Boiling Point | 403.6±28.0 °C at 760 mmHg |
Melting Point | 153-156 °C |
Molecular Formula | C12H9NO3 |
Molecular Weight | 215.205 |
Flash Point | 195.6±16.4 °C |
Exact Mass | 215.058243 |
PSA | 54.45000 |
LogP | 0.54 |
Vapour Pressure | 0.0±0.9 mmHg at 25°C |
Index of Refraction | 1.614 |
Synonym: Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 36/37/38 Section 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin. Potential Health Effects Eye: Causes eye irritation. Skin: Causes skin irritation. May be harmful if absorbed through the skin. Ingestion: May cause irritation of the digestive tract. May be harmful if swallowed. Inhalation: Causes respiratory tract irritation. May be harmful if inhaled. Chronic: Not available. Section 4 - FIRST AID MEASURES Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Skin: Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Ingestion: Get medical aid. Wash mouth out with water. Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Notes to Physician: Treat symptomatically and supportively. Section 5 - FIRE FIGHTING MEASURES General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam. Section 6 - ACCIDENTAL RELEASE MEASURES General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Section 7 - HANDLING and STORAGE Handling: Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. Storage: Store in a cool, dry place. Store in a tightly closed container. Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 1082-85-5: Personal Protective Equipment Eyes: Not available. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Section 9 - PHYSICAL AND CHEMICAL PROPERTIES Physical State: Solid Color: yellow Odor: Not available. pH: Not available. Vapor Pressure: Not available. Viscosity: Not available. Boiling Point: Not available. Freezing/Melting Point: 153 - 156 deg C Autoignition Temperature: Not available. Flash Point: Not available. Explosion Limits, lower: Not available. Explosion Limits, upper: Not available. Decomposition Temperature: Solubility in water: Insoluble. Specific Gravity/Density: Molecular Formula: C12H9NO3 Molecular Weight: 215.21 Section 10 - STABILITY AND REACTIVITY Chemical Stability: Not available. Conditions to Avoid: Incompatible materials. Incompatibilities with Other Materials: Strong oxidizing agents. Hazardous Decomposition Products: Nitrogen oxides, carbon monoxide, carbon dioxide. Hazardous Polymerization: Has not been reported Section 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 1082-85-5 unlisted. LD50/LC50: Not available. Carcinogenicity: N-(4-Acetylphenyl)maleimide - Not listed by ACGIH, IARC, or NTP. Section 12 - ECOLOGICAL INFORMATION Section 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations. Section 14 - TRANSPORT INFORMATION IATA No information available. IMO No information available. RID/ADR No information available. Section 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives Hazard Symbols: XI Risk Phrases: R 36/37/38 Irritating to eyes, respiratory system and skin. Safety Phrases: S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S 37/39 Wear suitable gloves and eye/face protection. WGK (Water Danger/Protection) CAS# 1082-85-5: No information available. Canada None of the chemicals in this product are listed on the DSL/NDSL list. CAS# 1082-85-5 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 1082-85-5 is not listed on the TSCA inventory. It is for research and development use only. SECTION 16 - ADDITIONAL INFORMATION N/A |
Hazard Codes | Xn,Xi |
---|---|
Risk Phrases | R36/37/38 |
Safety Phrases | S37/39-S26 |
RIDADR | 2811.0 |
Hazard Class | 6.1 |
HS Code | 2925190090 |
HS Code | 2925190090 |
---|---|
Summary | 2925190090 other imides and their derivatives; salts thereof VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:6.5% General tariff:30.0% |
1-(4-acetylphenyl)pyrrole-2,5-dione |
1-(4-Acetylphenyl)-1H-pyrrole-2,5-dione |
MFCD00014537 |
EINECS 214-106-1 |
1-(4-acetylphenyl)-2,5-dihydro-1H-pyrrole-2,5-dione |
N-(4-Acetylphenyl)maleimide |
1H-Pyrrole-2,5-dione, 1-(4-acetylphenyl)- |