Ammonium iodide structure
|
Common Name | Ammonium iodide | ||
---|---|---|---|---|
CAS Number | 12027-06-4 | Molecular Weight | 144.943 | |
Density | 2.51 | Boiling Point | 69.4ºC at 760 mmHg | |
Molecular Formula | H4IN | Melting Point | 551 °C | |
MSDS | Chinese USA | Flash Point | N/A | |
Symbol |
GHS07 |
Signal Word | Warning |
Name | ammonium iodide |
---|---|
Synonym | More Synonyms |
Density | 2.51 |
---|---|
Boiling Point | 69.4ºC at 760 mmHg |
Melting Point | 551 °C |
Molecular Formula | H4IN |
Molecular Weight | 144.943 |
Exact Mass | 144.938828 |
PSA | 3.24000 |
LogP | 1.32210 |
Vapour Pressure | 5990mmHg at 25°C |
Index of Refraction | 1.7031 |
Storage condition | Store at RT. |
Synonym:None known Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: None Listed. Section 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW
Hygroscopic (absorbs moisture from the air).Air sensitive.Light sensitive.The toxicological properties of this material have not been fully investigated. Potential Health Effects Eye: May cause eye irritation. Skin: May cause skin irritation. Ingestion: May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated. Chronic ingestion of iodides during pregnancy has resulted in fetal death, severe goiter, and cretinoid appearance of the newborn. Inhalation: May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Chronic: Chronic ingestion of iodides during pregnancy has resulted in fetal death, severe goiter, and cretinoid appearance of the newborn.. Prolonged exposure to iodides may produce iodism in sensitive individuals. Symptoms could include skin rash, running nose and headache. Section 4 - FIRST AID MEASURES Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Skin: Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Ingestion: Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Notes to Physician: Section 5 - FIRE FIGHTING MEASURES General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing Media: Use water spray to cool fire-exposed containers. Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam. Section 6 - ACCIDENTAL RELEASE MEASURES General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up, then place into a suitable container for disposal. Avoid generating dusty conditions. Provide ventilation. Place under an inert atmosphere. Section 7 - HANDLING and STORAGE Handling: Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Store protected from light. Handle under an inert atmosphere. Store protected from air. Storage: Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Do not expose to air. Store protected from moisture. Store protected from light. Store under an inert atmosphere. Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 12027-06-4: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use. Section 9 - PHYSICAL AND CHEMICAL PROPERTIES Physical State: Crystals Color: white to light yellow Odor: None reported. pH: 4.5-6.5, 5% aq. soln Vapor Pressure: Not available. Viscosity: Not available. Boiling Point: Not available. Freezing/Melting Point: 551 deg C Autoignition Temperature: Not applicable. Flash Point: 405 deg C ( 761.00 deg F) Explosion Limits, lower: Not available. Explosion Limits, upper: Not available. Decomposition Temperature: 405 deg C Solubility in water: 1g/0.6ml Specific Gravity/Density: 2.5140g/cm3 Molecular Formula: H4IN Molecular Weight: 144.94 Section 10 - STABILITY AND REACTIVITY Chemical Stability: Stable under normal temperatures and pressures. Conditions to Avoid: Incompatible materials, light, dust generation, exposure to air, excess heat, strong oxidants, exposure to moist air or water. Incompatibilities with Other Materials: Air, moisture, strong oxidizing agents. Hazardous Decomposition Products: Oxides of nitrogen, irritating and toxic fumes and gases, hydrogen iodide. Hazardous Polymerization: Has not been reported. Section 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 12027-06-4 unlisted. LD50/LC50: Not available. Carcinogenicity: Ammonium iodide ((nh4)i) - Not listed by ACGIH, IARC, or NTP. Section 12 - ECOLOGICAL INFORMATION Section 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations. Section 14 - TRANSPORT INFORMATION IATA Shipping Name: Not regulated. Hazard Class: UN Number: Packing Group: IMO Shipping Name: Not regulated. Hazard Class: UN Number: Packing Group: RID/ADR Shipping Name: Not regulated. Hazard Class: UN Number: Packing group: Section 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives Hazard Symbols: Not available. Risk Phrases: Safety Phrases: S 24/25 Avoid contact with skin and eyes. S 28A After contact with skin, wash immediately with plenty of water. S 37 Wear suitable gloves. S 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). WGK (Water Danger/Protection) CAS# 12027-06-4: 1 Canada CAS# 12027-06-4 is listed on Canada's DSL List. CAS# 12027-06-4 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 12027-06-4 is listed on the TSCA inventory. SECTION 16 - ADDITIONAL INFORMATION N/A |
Symbol |
GHS07 |
---|---|
Signal Word | Warning |
Hazard Statements | H315-H319-H335 |
Precautionary Statements | P261-P305 + P351 + P338 |
Personal Protective Equipment | dust mask type N95 (US);Eyeshields;Gloves |
Hazard Codes | Xi: Irritant; |
Risk Phrases | R36/37/38 |
Safety Phrases | S26 |
RIDADR | NONH for all modes of transport |
WGK Germany | 3 |
HS Code | 2827600000 |
HS Code | 2827600000 |
---|
Markers of mesterolone abuse in sulfate fraction for doping control in human urine.
J. Mass Spectrom. 50 , 1409-19, (2015) This manuscript describes the direct detection of mesteroloe sulfo-conjugated metabolites by liquid chromatography/quadrupole/time of flight mass spectrometry (LC/Q/TOFMS) with special focus on evalua... |
|
Metabolism of methylstenbolone studied with human liver microsomes and the uPA⁺/⁺-SCID chimeric mouse model.
Biomed. Chromatogr. 28(7) , 974-85, (2014) Anti-doping laboratories need to be aware of evolutions on the steroid market and elucidate steroid metabolism to identify markers of misuse. Owing to ethical considerations, in vivo and in vitro mode... |
|
Anabolic steroids detected in bodybuilding dietary supplements - a significant risk to public health.
Drug Test. Anal. 7 , 609-18, (2015) Twenty-four products suspected of containing anabolic steroids and sold in fitness equipment shops in the United Kingdom (UK) were analyzed for their qualitative and semi-quantitative content using fu... |
azanium,iodide |
MFCD00011424 |
Ammonium iodide |
EINECS 234-717-7 |