2-(styrylthio)acetic acid structure
|
Common Name | 2-(styrylthio)acetic acid | ||
---|---|---|---|---|
CAS Number | 13435-97-7 | Molecular Weight | 194.25000 | |
Density | 1.249g/cm3 | Boiling Point | 371.4ºC at 760mmHg | |
Molecular Formula | C10H10O2S | Melting Point | N/A | |
MSDS | USA | Flash Point | 178.4ºC |
Name | 2-(styrylthio)acetic acid |
---|---|
Synonym | More Synonyms |
Density | 1.249g/cm3 |
---|---|
Boiling Point | 371.4ºC at 760mmHg |
Molecular Formula | C10H10O2S |
Molecular Weight | 194.25000 |
Flash Point | 178.4ºC |
Exact Mass | 194.04000 |
PSA | 62.60000 |
LogP | 2.47510 |
Vapour Pressure | 3.58E-06mmHg at 25°C |
Index of Refraction | 1.644 |
Synonym: Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 36/37/38 Section 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin. Potential Health Effects Eye: Causes eye irritation. Skin: Causes skin irritation. May be harmful if absorbed through the skin. Ingestion: May cause irritation of the digestive tract. May be harmful if swallowed. Inhalation: Causes respiratory tract irritation. May be harmful if inhaled. Chronic: Not available. Section 4 - FIRST AID MEASURES Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Skin: Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Ingestion: Get medical aid. Wash mouth out with water. Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Notes to Physician: Treat symptomatically and supportively. Section 5 - FIRE FIGHTING MEASURES General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam. Section 6 - ACCIDENTAL RELEASE MEASURES General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Section 7 - HANDLING and STORAGE Handling: Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. Storage: Store in a cool, dry place. Store in a tightly closed container. Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 13435-97-7: Personal Protective Equipment Eyes: Not available. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Section 9 - PHYSICAL AND CHEMICAL PROPERTIES Physical State: Solid Color: white - off-white Odor: Not available. pH: Not available. Vapor Pressure: Not available. Viscosity: Not available. Boiling Point: Not available. Freezing/Melting Point: 81 - 84 deg C Autoignition Temperature: Not available. Flash Point: Not available. Explosion Limits, lower: Not available. Explosion Limits, upper: Not available. Decomposition Temperature: Solubility in water: Specific Gravity/Density: Molecular Formula: C10H10O2S Molecular Weight: 194 Section 10 - STABILITY AND REACTIVITY Chemical Stability: Not available. Conditions to Avoid: Incompatible materials. Incompatibilities with Other Materials: Oxidizing agents. Hazardous Decomposition Products: Carbon monoxide, oxides of sulfur, carbon dioxide. Hazardous Polymerization: Has not been reported Section 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 13435-97-7 unlisted. LD50/LC50: Not available. Carcinogenicity: 2-(Styrylthio)acetic acid - Not listed by ACGIH, IARC, or NTP. Section 12 - ECOLOGICAL INFORMATION Section 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations. Section 14 - TRANSPORT INFORMATION IATA No information available. IMO No information available. RID/ADR No information available. Section 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives Hazard Symbols: XI Risk Phrases: R 36/37/38 Irritating to eyes, respiratory system and skin. Safety Phrases: S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S 37/39 Wear suitable gloves and eye/face protection. WGK (Water Danger/Protection) CAS# 13435-97-7: No information available. Canada None of the chemicals in this product are listed on the DSL/NDSL list. CAS# 13435-97-7 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 13435-97-7 is not listed on the TSCA inventory. It is for research and development use only. SECTION 16 - ADDITIONAL INFORMATION N/A |
HS Code | 2930909090 |
---|
~% 2-(styrylthio)a... CAS#:13435-97-7 |
Literature: Liu; Wang Scientia PekingChem.Abstr., 1957 , vol. 8, p. 206 Scientia PekingChem.Abstr., 1959 , p. 9115 Full Text Show Details Holmberg Arkiv foer Kemi, 1951 , vol. 2, p. 567,575 |
Precursor 2 | |
---|---|
DownStream 0 |
HS Code | 2930909090 |
---|---|
Summary | 2930909090. other organo-sulphur compounds. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0% |
3-Buten-2-one,1,1-dimethoxy-4-phenyl |
styrylmercapto-acetic acid |
Styrylmercapto-essigsaeure |
2-[(2-Phenylethenyl)Thio]-Acetic Acid |
3-Buten-2-one,1,1-dimethoxy-4-phenyl-,(3E) |
Styrylglyoxal 1-(dimethyl acetal) |
1,1-dimethoxy-4-phenyl-3-buten-2-one |
E-1,1-dimethoxy-4-phenyl-3-buten-2-one |
1,1-Dimethoxy-4-phenyl-3-buten-2-on |