4-Bromo-2-methylbenzenesulfonyl chloride

Modify Date: 2024-01-11 17:58:27

4-Bromo-2-methylbenzenesulfonyl chloride Structure
4-Bromo-2-methylbenzenesulfonyl chloride structure
Common Name 4-Bromo-2-methylbenzenesulfonyl chloride
CAS Number 139937-37-4 Molecular Weight 269.543
Density 1.7±0.1 g/cm3 Boiling Point 307.0±30.0 °C at 760 mmHg
Molecular Formula C7H6BrClO2S Melting Point 65-67ºC
MSDS USA Flash Point 139.4±24.6 °C
Symbol GHS05 GHS07
GHS05, GHS07
Signal Word Danger

 Names

Name 4-Bromo-2-methylbenzene-1-sulfonyl chloride
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.7±0.1 g/cm3
Boiling Point 307.0±30.0 °C at 760 mmHg
Melting Point 65-67ºC
Molecular Formula C7H6BrClO2S
Molecular Weight 269.543
Flash Point 139.4±24.6 °C
Exact Mass 267.896027
PSA 42.52000
LogP 3.48
Vapour Pressure 0.0±0.6 mmHg at 25°C
Index of Refraction 1.580

 MSDS

Name: 4-Bromo-2-methylbenzene-1-sulfonyl chloride 97% Material Safety Data Sheet
Synonym: None Known
CAS: 139937-37-4
Section 1 - Chemical Product MSDS Name:4-Bromo-2-methylbenzene-1-sulfonyl chloride 97% Material Safety Data Sheet
Synonym:None Known

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
139937-37-4 4-Bromo-2-methylbenzene-1-sulfonyl chl 97% unlisted
Hazard Symbols: C
Risk Phrases: 34

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Causes burns.Water-reactive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Chronic exposure may cause effects similar to those of acute exposure.

Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. If water-reactive products are embedded in the skin, no water should be applied. The embedded products should be covered with a light oil.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give anything by mouth to an unconscious person.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Water Reactive. Material will react with water and may release a flammable and/or toxic gas.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER! Contact professional fire-fighters immediately.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation. Do not expose spill to water.

Section 7 - HANDLING and STORAGE
Handling:
Minimize dust generation and accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing.
Keep container tightly closed. Do not ingest or inhale. Do not allow contact with water. Use only in a chemical fume hood. Discard contaminated shoes.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Keep away from water. Corrosives area. Store under nitrogen.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 139937-37-4: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: pale yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 164 deg C @15mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C7H6BrClO2S
Molecular Weight: 270

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Reacts with water to form toxic fumes.
Conditions to Avoid:
Dust generation, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, acids, bases, amines, water.
Hazardous Decomposition Products:
Hydrogen chloride, chlorine, carbon monoxide, oxides of sulfur, carbon dioxide, hydrogen bromide, bromine.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 139937-37-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Bromo-2-methylbenzene-1-sulfonyl chloride - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION
Ecotoxicity:
Fish: Pseudomonas putida:

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: WATER-REACTIVE SOLID, CORROSIVE, N.O.S.
Hazard Class: 4.3
UN Number: 3131
Packing Group: II
IMO
Shipping Name: WATER-REACTIVE SOLID, CORROSIVE, N.O.S.
Hazard Class: 4.3
UN Number: 3131
Packing Group: II
RID/ADR
Shipping Name: WATER-REACTIVE SOLID, CORROSIVE, N.O.S.
Hazard Class: 4.3
UN Number: 3131
Packing group: II

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 139937-37-4: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 139937-37-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 139937-37-4 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Symbol GHS05 GHS07
GHS05, GHS07
Signal Word Danger
Hazard Statements H302-H314
Precautionary Statements P280-P305 + P351 + P338-P310
Hazard Codes C: Corrosive;
Risk Phrases R14;R29;R34
Safety Phrases S8-S22-S26-S30-S36/37/39-S45
RIDADR UN 3261
HS Code 2904909090

 Synthetic Route

~96%

4-Bromo-2-methylbenzenesulfonyl chloride Structure

4-Bromo-2-methy...

CAS#:139937-37-4

Literature: Chen, Qiao-Hong; Rao, P. N. Praveen; Knaus, Edward E. Bioorganic and Medicinal Chemistry, 2005 , vol. 13, # 7 p. 2459 - 2468

~%

4-Bromo-2-methylbenzenesulfonyl chloride Structure

4-Bromo-2-methy...

CAS#:139937-37-4

Literature: Journal of the American Chemical Society, , vol. 73, p. 3013,3016

 Customs

HS Code 2904909090
Summary HS:2904909090 sulphonated, nitrated or nitrosated derivatives of hydrocarbons, whether or not halogenated VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:5.5% General tariff:30.0%

 Synonyms

Benzenesulfonyl chloride, 4-bromo-2-methyl-
4-BROMO-2-METHYLBENZENE-1-SULFONYL CHLORIDE
4-Bromo-2-methylbenzenesulfonyl chloride
MFCD00219927
Top Suppliers:I want be here


Get all suppliers and price by the below link:

4-Bromo-2-methylbenzenesulfonyl chloride suppliers

4-Bromo-2-methylbenzenesulfonyl chloride price