hexylmethyldichlorosilane

Modify Date: 2024-01-11 19:17:56

hexylmethyldichlorosilane Structure
hexylmethyldichlorosilane structure
Common Name hexylmethyldichlorosilane
CAS Number 14799-94-1 Molecular Weight 199.193
Density 1.0±0.1 g/cm3 Boiling Point 191.0±8.0 °C at 760 mmHg
Molecular Formula C7H16Cl2Si Melting Point <0ºC
MSDS N/A Flash Point 64.0±16.0 °C

 Names

Name Dichlorohexylmethylsilane
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.0±0.1 g/cm3
Boiling Point 191.0±8.0 °C at 760 mmHg
Melting Point <0ºC
Molecular Formula C7H16Cl2Si
Molecular Weight 199.193
Flash Point 64.0±16.0 °C
Exact Mass 198.039825
LogP 5.84
Vapour Pressure 0.7±0.4 mmHg at 25°C
Index of Refraction 1.435

 MSDS

Dichlorohexylmethylsilane Revision number: 5
SAFETY DATA SHEET

Section1. IDENTIFICATION
Product name:Dichlorohexylmethylsilane

Revision number:5

Section2. HAZARDS IDENTIFICATION
GHS classification
PHYSICAL HAZARDS
Category 4
Flammable liquids
Corrosive to metalsCategory 1
HEALTH HAZARDS
Skin corrosion/irritationCategory 1B
Category 1
Serious eye damage/eye irritation
ENVIRONMENTAL HAZARDSNot classified
GHS label elements, including precautionary statements
Pictograms or hazard symbols
Signal wordDanger
Hazard statementsCombustible liquid
May be corrosive to metals
Causes severe skin burns and eye damage
Precautionary statements:
[Prevention]Keep away from flames and hot surfaces.
Keep only in original container.
Do not breathe dust/fume/gas/mist/vapours/spray.
Wash hands thoroughly after handling.
Wear protective gloves and eye/face protection.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
[Response]
breathing.
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse
skin with water/shower.
Wash contaminated clothing before reuse.
Immediately call a POISON CENTER or doctor/physician.
Absorb spillage to prevent material damage.
[Storage]Store in a well-ventilated place. Keep cool.
Store locked up.
Dichlorohexylmethylsilane

Section2. HAZARDS IDENTIFICATION
[Disposal]Dispose of contents/container through a waste management company authorized by
the local government.

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture:Substance
Components:Dichlorohexylmethylsilane
>95.0%(GC)
Percent:
CAS Number:14799-94-1
Hexylmethyldichlorosilane
Synonyms:
Chemical Formula:C7H16Cl2Si

Section4. FIRST AID MEASURES
Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Immediately call a POISON CENTER or doctor/physician.
Skin contact:Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
soap and water. Immediately call a POISON CENTER or doctor/physician.
Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.Immediately call a POISON CENTER or
doctor/physician.
Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Do NOT
Ingestion:
induce vomiting.
Protection of first-aiders:A rescuer should wear personal protective equipment, such as rubber gloves and air-
tight goggles.

Section5. FIRE-FIGHTING MEASURES
Suitable extinguishingDry chemical, carbon dioxide.
media:
Unsuitable extinguishing Water
media:
Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to
generate poisonous fume.
from the chemical:
Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Remove movable
containers if safe to do so.
Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment.
equipment for firefighters:

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions,Use extra personal protective equipment (self-contained breathing apparatus). Keep
protective equipment and people away from and upwind of spill/leak. Ensure adequate ventilation. Entry to non-
emergency procedures: involved personnel should be controlled around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust).
containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected
up: material should be promptly disposed of, in accordance with appropriate laws and
regulations.
Prevention of secondary Do not allow contact with water. Remove all sources of ignition. Fire-extinguishing
hazards:devices should be prepared in case of a fire. Use spark-proof tools and explosion-
proof equipment.

Section7. HANDLING AND STORAGE
Precautions for safe handling
Dichlorohexylmethylsilane

Section7. HANDLING AND STORAGE
Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment.
Prevent generation of vapour or mist. Keep away from flames and hot surfaces. Take
measures to prevent the build up of electrostatic charge. Use explosion-proof
equipment. Wash hands and face thoroughly after handling.
Use a closed system, ventilation.
Advice on safe handling: Avoid contact with skin, eyes and clothing.
May develop pressure. Open carefully.
Use corrosive resistant equipment.
Conditions for safe storage, including any
incompatibilities
Storage conditions:Keep container tightly closed. Store in a cool, dark and well-ventilated place.
Store under inert gas.
Protect from moisture.
Store locked up.
Store away from incompatible materials such as oxidizing agents.
Moisture-sensitive
Comply with laws. Keep only in original container.
Packaging material:

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls:Install a closed system or local exhaust. Also install safety shower and eye bath.
Personal protective equipment
Respiratory protection: Half or full facepiece respirator, self-contained breathing apparatus(SCBA), supplied
air respirator, etc. Use respirators approved under appropriate government standards
and follow local and national regulations.
Impervious gloves.
Hand protection:
Eye protection:Safety goggles. A face-shield, if the situation requires.
Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state (20°C):Liquid
Form:Clear
Colorless - Pale reddish yellow
Colour:
Odour:No data available
pH: No data available
Melting point/freezing point:No data available
Boiling point/range:103°C/6.7kPa
Flash point:85°C
Flammability or explosive
limits:
Lower:No data available
Upper:No data available
Vapour density:>1
Relative density:0.99
Solubility(ies):
[Water]No data available
[Other solvents]No data available

Section10. STABILITY AND REACTIVITY
Chemical stability:Stable under proper conditions.
Possibility of hazardous Decomposes in contact with water and liberates toxic gases.
reactions:
Conditions to avoid:Open flame, Moisture
Incompatible materials: Oxidizing agents
Hazardous decomposition Carbon monoxide, Carbon dioxide, Hydrogen chloride, Silicon oxides
products:
Dichlorohexylmethylsilane

Section11. TOXICOLOGICAL INFORMATION
Acute Toxicity:No data available
Skin corrosion/irritation: No data available
Serious eyeNo data available
damage/irritation:
Germ cell mutagenicity: No data available
Carcinogenicity:
IARC =No data available
No data available
NTP =
Reproductive toxicity:No data available

Section12. ECOLOGICAL INFORMATION
Ecotoxicity:
Fish:No data available
Crustacea:No data available
Algae:No data available
Persistence / degradability: No data available
No data available
Bioaccumulative
potential(BCF):
Mobility in soil
Log Pow:No data available
Soil adsorption (Koc):No data available
Henry's LawNo data available
constant(PaM3/mol):

Section13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
disposing of the substance.

Section14. TRANSPORT INFORMATION
Hazards Class:8: Corrosive.
UN-No:2987
Proper shipping name:Chlorosilanes, corrosive, n.o.s.
Packing group:II

Section15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
loading and unloading were prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Hazard Codes C: Corrosive;
Risk Phrases R34
Safety Phrases S26-S28-S36/37/39-S45
RIDADR UN 2987 8/PG 2
WGK Germany 1
HS Code 2931900090

 Customs

HS Code 2931900090
Summary 2931900090. other organo-inorganic compounds. VAT:17.0%. Tax rebate rate:13.0%. Supervision conditions:AB(certificate of inspection for goods inward,certificate of inspection for goods outward). MFN tariff:6.5%. General tariff:30.0%

 Synonyms

EINECS 238-864-8
MFCD00039295
hexylmethyldichlorosilane
N-HEXYLMETHYLDICHLOROSILANE
Dichloro(hexyl)methylsilane
Silane, dichlorohexylmethyl-