tris(2,2,6,6-tetramethyl-3,5-heptanedionato)scandium(iii)

Modify Date: 2024-02-28 15:51:39

tris(2,2,6,6-tetramethyl-3,5-heptanedionato)scandium(iii) Structure
tris(2,2,6,6-tetramethyl-3,5-heptanedionato)scandium(iii) structure
Common Name tris(2,2,6,6-tetramethyl-3,5-heptanedionato)scandium(iii)
CAS Number 15492-49-6 Molecular Weight 594.75800
Density N/A Boiling Point 275ºC
Molecular Formula C33H57O6Sc Melting Point 150-152ºC
MSDS N/A Flash Point 275°C

 Names

Name tris(2,2,6,6-tetramethyl-3,5-heptanedionato)scandium(iii)
Synonym More Synonyms

 Chemical & Physical Properties

Boiling Point 275ºC
Melting Point 150-152ºC
Molecular Formula C33H57O6Sc
Molecular Weight 594.75800
Flash Point 275°C
Exact Mass 594.37100
PSA 78.90000
LogP 9.03750
Appearance of Characters Powder | white
Water Solubility Soluble in ethyl acetate

 MSDS


Section 1: Product Identification
Chemical Name:Tris(2,2,6,6-tetramethyl-3,5-heptanedionato)scandium(III), 99% (99.9%-Sc) (REO) Sc(TMHD)3
CAS Registry Number:15492-49-6
Formula:Sc(C11H19O2)3
EINECS Number:none
Chemical Family:metal beta-diketonate complexes
Synonym:Dipivaloylmethane, scandium complex

Section 2: Composition and Information on Ingredients
IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL)
Title Compound15492-49-6100%no datano data

Section 3: Hazards Identification
Emergency Overview:No particular hazard associated with this material. May be irritating to skin, eyes and respiratory tract.
Primary Routes of Exposure:Ingestion, inhalation
Eye Contact:May cause slight to mild irritation of the eyes.
Skin Contact:May cause slight to mild irritation of the skin.
Inhalation:May be irritating to the nose, mucous membranes and respiratory tract.
Ingestion:No specific information is available on the physiological effects of ingestion.
Acute Health Affects:May be irritating to skin, eyes and respiratory tract.
Chronic Health Affects:No information available on long-term chronic effects.
NTP:No
IARC:No
OSHA:No

SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with soap and water. Remove contaminated clothes if necessary. Seek medical
Skin Exposure:
assistance if irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
Inhalation:
in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Ingestion:Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious).

SECTION 5: Fire Fighting Measures
Flash Point:not applicable
Autoignition Temperature:none
Explosion Limits:none
Extinguishing Medium:carbon dioxide, dry powder or foam
If involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained
Special Fire Fighting Procedures:
breathing apparatus and full protective clothing.
Hazardous Combustion andIf involved in a fire this material may emit toxic organic fumes.
Decomposion Products:
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
Spill and Leak Procedures:Small spills can be mixed with vermiculite or sodium carbonate and swept up.

SECTION 7: Handling and Storage
Handling and Storage:Store in a sealed container. Keep away from heat and moisture.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:Wear appropriate chemical resistant gloves and protective clothing.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators
Respirator:
requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
Additional Protection:No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:white pwdr.
Molecular Weight:594.77
Melting Point:150-152°
Boiling Point:dec. 275°C
Vapor Pressure:no data
Specific Gravity:no data
Odor:none
Solubility in Water:insoluble

SECTION 10: Stability and Reactivity
Stability:air and moisture stable solid
Hazardous Polymerization:no hazardous polymerization
Conditions to Avoid:none
Incompatibility:Halogens
Decomposition Products:Carbon dioxide, carbon monoxide, organic vapors, and metal oxides and carbonates.

SECTION 11: Toxicological Information
RTECS Data:No information available in the RTECS files.
Carcinogenic Effects:No data available
Mutagenic Effects:No data available
Tetratogenic Effects:No data available

SECTION 12: Ecological Information
Ecological Information:No information available

SECTION 13: Disposal Considerations
Disposal:Dispose of according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):Non-hazardous
Hazard Class (CFR):NA
Additional Hazard Class (CFR):NA
Packaging Group (CFR):NA
UN ID Number (CFR):NA
Shipping Name (IATA):Non-hazardous
Hazard Class (IATA):NA
Additional Hazard Class (IATA):NA
Packaging Group (IATA):NA
UN ID Number (IATA):NA

SECTION 15: Regulatory Information
TSCA:Not listed in the TSCA inventory.
SARA (Title 313):Title compound not listed.
Second Ingredient:none


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Risk Phrases 36/37/38
Safety Phrases 26-36/37/39
WGK Germany 3

 Synonyms

scandium tetra-methyl heptanedionate
scandium dipivaloyl methanate
S-Butyl tetramethylphosphorodiamidothioate
S-Butyl-tetramethylphosphordiamidothioat
Phosphorodiamidothioic acid,tetramethyl-,S-butyl ester
MFCD00169875