(2R)-(-)-1,1-bis-(4-Methoxyphenyl)-3-methyl-1,2-butanediamine

Modify Date: 2024-01-16 10:01:16

(2R)-(-)-1,1-bis-(4-Methoxyphenyl)-3-methyl-1,2-butanediamine Structure
(2R)-(-)-1,1-bis-(4-Methoxyphenyl)-3-methyl-1,2-butanediamine structure
Common Name (2R)-(-)-1,1-bis-(4-Methoxyphenyl)-3-methyl-1,2-butanediamine
CAS Number 166764-19-8 Molecular Weight 314.42200
Density 1.077g/cm3 Boiling Point 477.9ºC at 760 mmHg
Molecular Formula C19H26N2O2 Melting Point 78-98ºC
MSDS N/A Flash Point 251.4ºC

 Names

Name (2R)-1,1-bis(4-methoxyphenyl)-3-methylbutane-1,2-diamine

 Chemical & Physical Properties

Density 1.077g/cm3
Boiling Point 477.9ºC at 760 mmHg
Melting Point 78-98ºC
Molecular Formula C19H26N2O2
Molecular Weight 314.42200
Flash Point 251.4ºC
Exact Mass 314.19900
PSA 70.50000
LogP 4.29000
Vapour Pressure 2.69E-09mmHg at 25°C
Index of Refraction 1.557

 MSDS


Section 1: Product Identification
Chemical Name:(2R)-(+)-1,1-Bis(4-methoxyphenyl)-3-methyl-1,2-butanediamine, min. 97% (R)-DAIPEN
CAS Registry Number:166764-19-8
Formula:C19H26N2O2
EINECS Number:none
Chemical Family:organic amine
Synonym:None

Section 2: Composition and Information on Ingredients
IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL)
Title compound166764-19-8100%no datano data

Section 3: Hazards Identification
Emergency Overview:No particular hazard associated with this material.
Primary Routes of Exposure:Ingestion, inhalation
Eye Contact:May cause slight to mild irritation of the eyes.
Skin Contact:May cause slight to mild irritation of the skin.
Inhalation:May be irritating to the nose, mucous membranes and respiratory tract.
Ingestion:No specific information is available on the physiological effects of ingestion.
Acute Health Affects:May be irritating to skin, eyes and respiratory tract.
Chronic Health Affects:No information available on long-term chronic effects.
NTP:No
IARC:No
OSHA:No

SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
Skin Exposure:
irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
Inhalation:
in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
Ingestion:
vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
Flash Point:none
Autoignition Temperature:none
Explosion Limits:none
Extinguishing Medium:carbon dioxide, dry powder or foam
Fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus
Special Fire Fighting Procedures:
and full protective clothing.
Hazardous Combustion andIf involved in a fire this material may emit toxic organic fumes.
Decomposion Products:
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
Spill and Leak Procedures:Small spills can be mixed with vermiculite or sodium carbonate and swept up.

SECTION 7: Handling and Storage
Handling and Storage:Store in a tightly sealed container. Keep away from heat and direct sunlight.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:Wear protective clothing and gloves.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator
Respirator:
Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
Additional Protection:No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:white to pale-yellow pwdr.
Molecular Weight:314.43
Melting Point:78-98°
Boiling Point:no data
Vapor Pressure:no data
Specific Gravity:no data
Odor:none
Solubility in Water:slightly soluble

SECTION 10: Stability and Reactivity
Stability:air and moisture-stable solid
Hazardous Polymerization:none
Conditions to Avoid:none
Incompatibility:strong oxidizing agents
Decomposition Products:carbon dioxide, carbon monoxide, nitrogen oxides, and organic fumes.

SECTION 11: Toxicological Information
RTECS Data:No specific information available on this product.
Carcinogenic Effects:No data available
Mutagenic Effects:No data available
Tetratogenic Effects:No data available

SECTION 12: Ecological Information
Ecological Information:No information available

SECTION 13: Disposal Considerations
Disposal:Dispose of according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):Non-hazardous
Hazard Class (CFR):NA
Additional Hazard Class (CFR):NA
Packaging Group (CFR):NA
UN ID Number (CFR):NA
Shipping Name (IATA):Non-hazardous
Hazard Class (IATA):NA
Additional Hazard Class (IATA):NA
Packaging Group (IATA):NA
UN ID Number (IATA):NA

SECTION 15: Regulatory Information
TSCA:Not listed on the TSCA inventory
SARA (Title 313):Not regulated by Title 313
Second Ingredient:none


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Hazard Codes C
Risk Phrases R36/37/38
Safety Phrases 26-36/37/39
HS Code 2922299090

 Customs

HS Code 2922299090
Summary 2922299090. other amino-naphthols and other amino-phenols, other than those containing more than one kind of oxygen function, their ethers and esters; salts thereof. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0%