2-Fluoro-5-(trifluoromethyl)benzene-1-sulfonyl chloride structure
|
Common Name | 2-Fluoro-5-(trifluoromethyl)benzene-1-sulfonyl chloride | ||
---|---|---|---|---|
CAS Number | 1744-43-0 | Molecular Weight | 262.60900 | |
Density | N/A | Boiling Point | N/A | |
Molecular Formula | C7H3ClF4O2S | Melting Point | N/A | |
MSDS | N/A | Flash Point | N/A |
Name | 2-fluoro-5-(trifluoromethyl)benzenesulfonyl chloride |
---|---|
Synonym | More Synonyms |
Molecular Formula | C7H3ClF4O2S |
---|---|
Molecular Weight | 262.60900 |
Exact Mass | 261.94800 |
PSA | 42.52000 |
LogP | 3.85280 |
Index of Refraction | 1.478 |
Material Safety Data Sheet
Section1. Identification of the substance Product Name: 2-Fluoro-5-(trifluoromethyl)benzenesulfonyl chloride Synonyms: Section2. Hazards identification Harmful by inhalation, in contact with skin, and if swallowed. H314:Causes severe skin burns and eye damage
H318:Causes serious eye damage P260:Do not breathe dust/fume/gas/mist/vapours/spray P303+P361+P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting P405:Store locked up Section3. Composition/information on ingredients. Ingredient name:2-Fluoro-5-(trifluoromethyl)benzenesulfonyl chloride CAS number:1744-43-0 Section4. First aid measures Skin contact:Immediately wash skin with copious amounts of water for at least 15 minutes while removing contaminated clothing and shoes. If irritation persists, seek medical attention. Eye contact:Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical attention. Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention. Ingestion:Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention. Section5. Fire fighting measures In the event of a fire involving this material, alone or in combination with other materials, use dry powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus should be worn. Section6. Accidental release measures Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national standards. Respiratory precaution:Wear approved mask/respirator Hand precaution:Wear suitable gloves/gauntlets Skin protection:Wear suitable protective clothing Eye protection:Wear suitable eye protection Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container for disposal. See section 12. Environmental precautions: Do not allow material to enter drains or water courses. Section7. Handling and storage Handling:This product should be handled only by, or under the close supervision of, those properly qualified in the handling and use of potentially hazardous chemicals, who should take into account the fire, health and chemical hazard data given on this sheet. Storage:Store in closed vessels, refrigerated. Section8. Exposure Controls / Personal protection Engineering Controls: Use only in a chemical fume hood. Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles. General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse. Section9. Physical and chemical properties Not specified Appearance: Boiling point:No data Melting point:No data Flash point:No data Density:No data Molecular formula:C7H3ClF4O2S Molecular weight:262.6 Section10. Stability and reactivity Conditions to avoid: Heat, flames and sparks. Materials to avoid: Oxidizing agents. Possible hazardous combustion products: Carbon monoxide, hydrogen chloride, hydrogen fluoride, sulfur oxides. Section11. Toxicological information No data. Section12. Ecological information No data. Section13. Disposal consideration Arrange disposal as special waste, by licensed disposal company, in consultation with local waste disposal authority, in accordance with national and regional regulations. Section14. Transportation information UN Number:UN3265 Class: 8 Packing group: II Proper shipping name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (2-Fluoro-5-(trifluoromethyl)benzenesulfonyl chloride) Section15. Regulatory information No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302, or have known CAS numbers that exceed the threshold reporting levels established by SARA Title III, Section 313. SECTION 16 - ADDITIONAL INFORMATION N/A |
Hazard Codes | C:Corrosive; |
---|---|
Risk Phrases | R34 |
Safety Phrases | S26 |
RIDADR | UN 3261 |
Packaging Group | II |
HS Code | 2904909090 |
HS Code | 2904909090 |
---|---|
Summary | HS:2904909090 sulphonated, nitrated or nitrosated derivatives of hydrocarbons, whether or not halogenated VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:5.5% General tariff:30.0% |
JRD-1841 |
2-Fluoro-5-(trifluoromethyl)benzenesulphonyl chloride |
2-Fluoro-5-(trifluoromethyl)benzenesulfonyl chloride |