4-Acetylbenzenesulfonyl chloride

Modify Date: 2024-01-01 21:52:48

4-Acetylbenzenesulfonyl chloride Structure
4-Acetylbenzenesulfonyl chloride structure
Common Name 4-Acetylbenzenesulfonyl chloride
CAS Number 1788-10-9 Molecular Weight 218.657
Density 1.4±0.1 g/cm3 Boiling Point 338.6±25.0 °C at 760 mmHg
Molecular Formula C8H7ClO3S Melting Point 84-87 °C
MSDS Chinese USA Flash Point 158.6±23.2 °C
Symbol GHS05
GHS05
Signal Word Danger

 Names

Name 4-Acetylbenzenesulfonyl chloride
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.4±0.1 g/cm3
Boiling Point 338.6±25.0 °C at 760 mmHg
Melting Point 84-87 °C
Molecular Formula C8H7ClO3S
Molecular Weight 218.657
Flash Point 158.6±23.2 °C
Exact Mass 217.980438
PSA 59.59000
LogP 1.89
Vapour Pressure 0.0±0.7 mmHg at 25°C
Index of Refraction 1.544

 MSDS

Name: 4-Acetylbenzenesulfonyl Chloride Material Safety Data Sheet
Synonym: None Known
CAS: 1788-10-9
Section 1 - Chemical Product MSDS Name:4-Acetylbenzenesulfonyl Chloride Material Safety Data Sheet
Synonym:None Known

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
1788-10-9 4-Acetylbenzenesulfonyl Chloride ca. 100 unlisted
Hazard Symbols: C
Risk Phrases: 34

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.Corrosive.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Inhalation may be fatal as a result of spasm, inflammation, edema of the larynx and bronchi, chemical pneumonitis and pulmonary edema. Aspiration may lead to pulmonary edema. May cause systemic effects. May cause burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea, and vomiting.
Chronic:
Effects may be delayed.

Section 4 - FIRST AID MEASURES
Eyes: Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed. Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. Water hydrolyzes material liberating acidic gas which in contact with metal surfaces can generate flammable and/or explosive hydrogen gas. Runoff from fire control or dilution water may cause pollution.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER! Do NOT get water inside containers.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation. Do not get water inside containers.

Section 7 - HANDLING and STORAGE
Handling:
Minimize dust generation and accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing.
Keep container tightly closed. Do not ingest or inhale. Do not allow contact with water. Use only in a chemical fume hood. Discard contaminated shoes. Keep from contact with moist air and steam.
Storage:
Keep container closed when not in use. Store in a tightly closed container. Corrosives area. Store protected from moisture.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 1788-10-9: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 81-85 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C8H7ClO3S
Molecular Weight: 218.5602

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, excess heat, strong oxidants, exposure to moist air or water.
Incompatibilities with Other Materials:
Moisture, oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of sulfur, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 1788-10-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Acetylbenzenesulfonyl Chloride - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION
Ecotoxicity:
Fish: Pseudomonas putida:

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 1788-10-9: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1788-10-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1788-10-9 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Symbol GHS05
GHS05
Signal Word Danger
Hazard Statements H314
Precautionary Statements P280-P305 + P351 + P338-P310
Personal Protective Equipment Eyeshields;Faceshields;full-face particle respirator type N100 (US);Gloves;respirator cartridge type N100 (US);type P1 (EN143) respirator filter;type P3 (EN 143) respirator cartridges
Hazard Codes C:Corrosive;
Risk Phrases R34
Safety Phrases S26-S36/37/39-S45-S25
RIDADR UN 3261 8/PG 3
WGK Germany 3
HS Code 29147000

 Synthetic Route

~55%

4-Acetylbenzenesulfonyl chloride Structure

4-Acetylbenzene...

CAS#:1788-10-9

Literature: Wagman; Wang; Nuss Journal of Organic Chemistry, 2000 , vol. 65, # 26 p. 9103 - 9113

~60%

4-Acetylbenzenesulfonyl chloride Structure

4-Acetylbenzene...

CAS#:1788-10-9

Literature: Ludwig, Miroslav; Stverka, Pavel Collection of Czechoslovak Chemical Communications, 1996 , vol. 61, # 8 p. 1205 - 1214

~%

4-Acetylbenzenesulfonyl chloride Structure

4-Acetylbenzene...

CAS#:1788-10-9

Literature: Journal of the American Chemical Society, , vol. 135, # 29 p. 10638 - 10641

~%

4-Acetylbenzenesulfonyl chloride Structure

4-Acetylbenzene...

CAS#:1788-10-9

Literature: Journal of Medicinal Chemistry, , vol. 43, # 2 p. 214 - 223

 Customs

HS Code 2914700090
Summary HS: 2914700090 halogenated, sulphonated, nitrated or nitrosated derivatives of ketones and quinones, whether or not with other oxygen function Tax rebate rate:9.0% Supervision conditions:none VAT:17.0% MFN tariff:5.5% General tariff:30.0%

 Synonyms

4-Acetyl-benzenesulfonyl chloride
acetophenone-4-sulfonyl chloride
p-acetylbenzenesulphonyl chloride
4-Acetylbenzene-1-sulfonyl chloride
MFCD00800269
Benzenesulfonyl chloride, 4-acetyl-
4-acetylbenzenesulphonyl chloride
4-Acetylbenzenesulfonyl chloride
Top Suppliers:I want be here



Get all suppliers and price by the below link:

4-Acetylbenzenesulfonyl chloride suppliers

4-Acetylbenzenesulfonyl chloride price