Fmoc-3-Abz-OH

Modify Date: 2024-01-02 18:05:14

Fmoc-3-Abz-OH Structure
Fmoc-3-Abz-OH structure
Common Name Fmoc-3-Abz-OH
CAS Number 185116-42-1 Molecular Weight 359.37500
Density 1.352g/cm3 Boiling Point 548.3ºC at 760mmHg
Molecular Formula C22H17NO4 Melting Point N/A
MSDS USA Flash Point 285.4ºC
Symbol GHS07
GHS07
Signal Word Warning

 Names

Name fmoc-3-aminobenzoic acid
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.352g/cm3
Boiling Point 548.3ºC at 760mmHg
Molecular Formula C22H17NO4
Molecular Weight 359.37500
Flash Point 285.4ºC
Exact Mass 359.11600
PSA 75.63000
LogP 4.81880
Vapour Pressure 7.42E-13mmHg at 25°C
Index of Refraction 1.684
Storage condition 2-8°C

 MSDS

Material Safety Data Sheet

Section1. Identification of the substance
Product Name: Fmoc-3-aminobenzoic acid
Synonyms:

Section2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.
H315:Causes skin irritation
H319:Causes serious eye irritation
H335:May cause respiratory irritation
P261:Avoid breathing dust/fume/gas/mist/vapours/spray
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present
and easy to do – continue rinsing

Section3. Composition/information on ingredients.
Ingredient name:Fmoc-3-aminobenzoic acid
CAS number:185116-42-1

Section4. First aid measures
Skin contact:Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
Eye contact:
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion:Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

Section5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

Section6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution:Wear approved mask/respirator
Hand precaution:Wear suitable gloves/gauntlets
Skin protection:Wear suitable protective clothing
Eye protection:Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

Section7. Handling and storage
Handling:This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Storage:Store in closed vessels.

Section8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

Section9. Physical and chemical properties
Appearance:Not specified
No data
Boiling point:
Melting point:No data
Flash point:No data
Density:No data
Molecular formula: C22H17NO4
Molecular weight: 359.4

Section10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides.

Section11. Toxicological information
No data.

Section12. Ecological information
No data.

Section13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

Section14. Transportation information
Non-harzardous for air and ground transportation.

Section15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Symbol GHS07
GHS07
Signal Word Warning
Hazard Statements H315-H319-H335
Precautionary Statements P261-P305 + P351 + P338
Personal Protective Equipment dust mask type N95 (US);Eyeshields;Gloves
Hazard Codes Xi: Irritant;
Risk Phrases R36/37/38
Safety Phrases 26-36
RIDADR NONH for all modes of transport
WGK Germany 3

 Synthetic Route

~62%

Fmoc-3-Abz-OH Structure

Fmoc-3-Abz-OH

CAS#:185116-42-1

Literature: Lengyel, George A.; Eddinger, Geoffrey A.; Horne, W. Seth Organic Letters, 2013 , vol. 15, # 4 p. 944 - 947

 Precursor & DownStream

Precursor  2

DownStream  0

 Synonyms

FMOC-M-ABZ-OH
MFCD00235885
N-Fmoc-3-aminobenzoic acid
3-(N-Fmoc-amino) benzoic acid
FMOC-3-AMINOBENOZIC ACID
3-(9-FLUORENYLMETHYLOXYCARBONYL)AMINO-BENZOIC ACID
3-(9H-fluoren-9-ylmethoxycarbonylamino)benzoic acid
3-Fmoc-aminobenzoic acid
Fmoc-3-aminobenzoic acid
FMoc-3-Abz-OH(FMoc-3-aMinobenzoic Acid)
FMOC-3-ABZ-OH
N-(9-fluorenylmethoxycarbonyl)-3-aminobenzoic acid
Benzoic acid,3-[[(9H-fluoren-9-ylmethoxy)carbonyl]amino]-(9CI)
3-[N-(9-fluorenyl)methoxycarbonyl]aminobenzoic acid
Top Suppliers:I want be here




Get all suppliers and price by the below link:

Fmoc-3-Abz-OH suppliers

Fmoc-3-Abz-OH price