Q-switch II dye

Modify Date: 2024-04-02 10:14:54

Q-switch II dye Structure
Q-switch II dye structure
Common Name Q-switch II dye
CAS Number 21016-22-8 Molecular Weight 907.52700
Density N/A Boiling Point N/A
Molecular Formula C57H59ClO8 Melting Point N/A
MSDS N/A Flash Point N/A

 Names

Name 8-[5-[2,4-bis(4-pentoxyphenyl)-6,7-dihydro-5H-chromen-8-yl]penta-2,4-dienylidene]-2,4-diphenyl-6,7-dihydro-5H-chromen-1-ium,perchlorate

 Chemical & Physical Properties

Molecular Formula C57H59ClO8
Molecular Weight 907.52700
Exact Mass 906.39000
PSA 115.10000
LogP 16.04220

 MSDS

Name: Q-switch ii for neodymium lasers Material Safety Data Sheet
Synonym:
CAS: 21016-22-8
Section 1 - Chemical Product MSDS Name:Q-switch ii for neodymium lasers Material Safety Data Sheet
Synonym:

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
21016-22-8 1-benzopyrylium,8-5-6,7-dihydro-2,4-bi unlisted
Hazard Symbols: F
Risk Phrases: 11

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Highly flammable.
Potential Health Effects
The toxicological properties of this material have not been investigated. Use appropriate procedures to prevent opportunities for direct contact with the skin or eyes and to prevent inhalation.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower lids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
Remove contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire.
Autoignition Temperature: Not available.
Flash Point: Not available.
NFPA Rating: Not published.
Explosion Limits, Lower: Not available.
Upper: Not available.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Refrigerator/flammables.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels.
Personal Protective Equipment Eyes: Wear chemical goggles.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements must be followed whenever workplace conditions warrant a respirator's use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Not available.
Appearance: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Vapor Density: Not available.
Evaporation Rate: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 0 deg C
Decomposition Temperature: Not available.
Solubility: Not available.
Specific Gravity/Density: Not available.
Molecular Formula: C57H59ClO8
Molecular Weight: 907.53

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Not available.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Not available.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 21016-22-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION
For further information, contact Fisher Scientific.

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

CDG/CPL
IMO
Not regulated as a hazardous material.
IATA
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
Canadian TDG
No information available.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
S 7/9 Keep container tightly closed and in a
well-ventilated place.
WGK (Water Danger/Protection)
CAS# 21016-22-8:
Canada
CAS# 21016-22-8 is listed on Canada's DSL/NDSL List.
WHMIS: Not available.
CAS# 21016-22-8 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 21016-22-8 is listed on the TSCA inventory.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

RIDADR UN 1479
Packaging Group III
Hazard Class 5.1
Top Suppliers:I want be here

Get all suppliers and price by the below link:

Q-switch II dye suppliers

Q-switch II dye price