(+)-1,2-bis((2s,5s)-2,5-diethylphospholano)benzene(cyclooctadiene)rhodium(l)tetrafluoroborate structure
|
Common Name | (+)-1,2-bis((2s,5s)-2,5-diethylphospholano)benzene(cyclooctadiene)rhodium(l)tetrafluoroborate | ||
---|---|---|---|---|
CAS Number | 213343-64-7 | Molecular Weight | 660.36000 | |
Density | N/A | Boiling Point | N/A | |
Molecular Formula | C30H48BF4P2Rh | Melting Point | N/A | |
MSDS | Chinese USA | Flash Point | N/A |
Name | (1Z,5Z)-cycloocta-1,5-diene,(2S,5S)-1-[2-[(2S,5S)-2,5-diethylphospholan-1-yl]phenyl]-2,5-diethylphospholane,rhodium,tetrafluoroborate |
---|---|
Synonym | More Synonyms |
Molecular Formula | C30H48BF4P2Rh |
---|---|
Molecular Weight | 660.36000 |
Exact Mass | 660.23200 |
PSA | 27.18000 |
LogP | 10.57580 |
Appearance of Characters | Powder | Orange to red to brown |
Section 1: Product Identification (+)-1,2-Bis((2S,5S)-2,5-diethylphospholano)benzene(1,5-cyclooctadiene)rhodium (I) tetrafluoroborate, 98+% Chemical Name: (S,S)-Et-DUPHOS-Rh CAS Registry Number:213343-64-7 Formula:Rh(C8H12)(C22H36P2)+ BF4- EINECS Number:none
Chemical Family:organometallic complex Synonym:none Section 2: Composition and Information on Ingredients IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL) Title compound213343-64-7100%2.5mg/m3 (as F)2.5mg/m3 (as F) Section 3: Hazards Identification Emergency Overview:Irritating to the respiratory tract, skin and eyes. May be harmful if swallowed. Primary Routes of Exposure:Ingestion Eye Contact:Causes slight to mild irritation of the eyes. Skin Contact:Causes slight to mild irritation of the skin. Inhalation:Irritating to skin, eyes and respiratory tract. Ingestion:No information is available on the physiological effects of ingestion. Acute Health Affects:Irritating to skin, eyes and respiratory tract. Chronic Health Affects:No information available on long-term chronic effects. NTP:No IARC:No OSHA:No SECTION 4: First Aid Measures Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need Eye Exposure: assistance in keeping their eye lids open. Get immediate medical attention. Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if Skin Exposure: irritation persists. Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty Inhalation: in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance. Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce Ingestion: vomiting only if directed by medical personnel. SECTION 5: Fire Fighting Measures Flash Point:none Autoignition Temperature:none Explosion Limits:none Extinguishing Medium:carbon dioxide, dry powder or foam Fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus Special Fire Fighting Procedures: and full protective clothing. Hazardous Combustion andIf involved in a fire this material may emit toxic organic fumes. Decomposion Products: Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards. SECTION 6: Accidental Release Measures Spill and Leak Procedures:Small spills can be mixed with vermiculite or sodium carbonate and swept up. SECTION 7: Handling and Storage The material will degrade on prolonged exposure to air. Store under an inert atmosphere of nitrogen or argon. Handling and Storage: Keep bottle tightly sealed and away from heat and direct sunlight. SECTION 8: Exposure Controls and Personal Protection Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory. Skin Protection:Wear protective clothing and gloves. Ventilation:If possible, handle the material in an efficient fume hood. If ventilation is not available a respirator should be worn. The use of respirators requires a Respiratory Respirator: Protection Program to be in compliance with 29 CFR 1910.134. Ventilation:If possible, handle the material in an efficient fume hood. Additional Protection:No additional protection required. SECTION 9: Physical and Chemical Properties Color and Form:red-orange xtl. Molecular Weight:660.37 Melting Point:decomposes Boiling Point:decomposes Vapor Pressure:not applicable Specific Gravity:no data Odor:none Solubility in Water:insoluble SECTION 10: Stability and Reactivity Stability:air-sensitive solid Hazardous Polymerization:none Conditions to Avoid:contact with air. This material may degrade on prolonged exposure to air and moisture. Incompatibility:strong oxidizing agents Decomposition Products:carbon dioxide, carbon monoxide, phosphorus pentoxide, organic fumes and fluorinated byproducts. SECTION 11: Toxicological Information RTECS Data:No data available Carcinogenic Effects:No data available Mutagenic Effects:No data available Tetratogenic Effects:No data available SECTION 12: Ecological Information Ecological Information:No information available SECTION 13: Disposal Considerations Disposal:Dispose of according to local, state and federal regulations. SECTION 14: Transportation Shipping Name (CFR):Non-hazardous Hazard Class (CFR):NA Additional Hazard Class (CFR):NA Packaging Group (CFR):NA UN ID Number (CFR):NA Shipping Name (IATA):Non-hazardous Hazard Class (IATA):NA Additional Hazard Class (IATA):NA Packaging Group (IATA):NA UN ID Number (IATA):NA SECTION 15: Regulatory Information TSCA:not listed on the TSCA inventory SARA (Title 313):not regulated by Title 313 Second Ingredient:none SECTION 16 - ADDITIONAL INFORMATION N/A |
Personal Protective Equipment | Eyeshields;Gloves;type N95 (US);type P1 (EN143) respirator filter |
---|---|
Hazard Codes | Xi |
Risk Phrases | 36/37/38 |
Safety Phrases | 26-36/37/39 |
RIDADR | NONH for all modes of transport |
HS Code | 28439000 |
1,2-Bis((2S,5S)-2,5-diethylphospholano)benzene(cyclooctadiene)rhodium(I) tetrafluoroborate |
1,2-Bis[(2S,5S)-2,5-diethylphospholano]benzene(1,5-cyclooctadiene)rhodium(I) tetrafluoroborate |
(S,S)-Et-DUPHOS-Rh |