Silver sulfide

Modify Date: 2024-01-02 17:01:43

Silver sulfide Structure
Silver sulfide structure
Common Name Silver sulfide
CAS Number 21548-73-2 Molecular Weight 247.801
Density 7.234 g/mL at 25 °C(lit.) Boiling Point N/A
Molecular Formula Ag2S Melting Point 845 °C(lit.)
MSDS Chinese USA Flash Point N/A

 Names

Name silver(i) sulfide
Synonym More Synonyms

 Chemical & Physical Properties

Density 7.234 g/mL at 25 °C(lit.)
Melting Point 845 °C(lit.)
Molecular Formula Ag2S
Molecular Weight 247.801
Exact Mass 245.782257
PSA 25.30000
LogP 0.64820
Stability Stable. Incompatible with acids, strong oxidizing agents.

 MSDS

Name: Silver (I) sulfide 99.9% Material Safety Data Sheet
Synonym: Non
CAS: 21548-73-2
Section 1 - Chemical Product MSDS Name:Silver (I) sulfide 99.9% Material Safety Data Sheet
Synonym:Non

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
21548-73-2 Silver sulfide 99.9 244-438-2
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Light sensitive.The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation. No information regarding eye irritation and other potential effects was found.
Skin:
May cause skin irritation. No information regarding skin irritation and other potential effects was found.
Ingestion:
The toxicological properties of this substance have not been fully investigated.
Inhalation:
The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels.
Exposure Limits CAS# 21548-73-2: Japan: (listed as silver compounds): 0.01 mg/m3 OEL (as Ag) Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: black
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 845 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 7.2340g/cm3
Molecular Formula: Ag2S
Molecular Weight: 247.80

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
None reported.
Incompatibilities with Other Materials:
None reported..
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 21548-73-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Silver sulfide - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 21548-73-2: 0
Canada
CAS# 21548-73-2 is listed on Canada's DSL List.
CAS# 21548-73-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 21548-73-2 is listed on the TSCA inventory.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Personal Protective Equipment dust mask type N95 (US);Eyeshields;Gloves
Hazard Codes Xi: Irritant;
Risk Phrases R36/37/38
Safety Phrases S26-S36
RIDADR NONH for all modes of transport
WGK Germany 3

 Articles27

More Articles
Aqueous synthesis of highly luminescent AgInS₂-ZnS quantum dots and their biological applications.

Nanoscale 5(6) , 2322-7, (2013)

Highly emissive and air-stable AgInS2-ZnS quantum dots (ZAIS QDs) with quantum yields of up to 20% have been successfully synthesized directly in aqueous media in the presence of polyacrylic acid (PAA...

Ag2S-ZnO--an efficient photocatalyst for the mineralization of Acid Black 1 with UV light.

Spectrochim. Acta. A. Mol. Biomol. Spectrosc. 105 , 314-9, (2013)

The Ag(2)S loaded ZnO (Ag(2)S-ZnO) was successfully synthesized by precipitation of zinc oxalate and Ag(2)S and calcination of the mixed precipitate at 400 °C for 12 h. The catalyst was characterized ...

Highly efficient antiviral and antibacterial activities of solid-state cuprous compounds.

J. Hazard. Mater. 235-236 , 265-70, (2012)

We found that several solid-state cuprous compounds, including cuprous oxide (Cu(2)O), sulfide (Cu(2)S), iodide (CuI), and chloride (CuCl), have highly efficient antiviral activities, whereas those of...

 Synonyms

Silver(1+) sulfidosilver
MFCD00003406
EINECS 244-438-2
Disilver(1+) sulfide
Top Suppliers:I want be here



Get all suppliers and price by the below link:

Silver sulfide suppliers

Silver sulfide price