2,2-dimethyl-4-cyclopentene-1,3-dione

---

SPECIAL INDICATION OF HAZARDS TO HUMANS AND THE ENVIRONMENT
Harmful if swallowed. May cause sensitization by skin contact.

---

3 - Composition/Information on Ingredients

---

Product NameCAS #EC noAnnex I
Index Number
2,2-DIMETHYL-4-CYCLOPENTEN-1,3-DIO 26154-22-3 NoneNone
NE
FormulaC7H8O2
Molecular Weight 124,1400 AMU

---

4 - First Aid Measures

---

AFTER INHALATION
If inhaled, remove to fresh air. If breathing becomes difficult,
call a physician.
AFTER SKIN CONTACT
In case of skin contact, flush with copious amounts of water for
at least 15 minutes. Remove contaminated clothing and shoes.
Call a physician.
AFTER EYE CONTACT
In case of contact with eyes, flush with copious amounts of
water for at least 15 minutes. Assure adequate flushing by
separating the eyelids with fingers. Call a physician.
AFTER INGESTION
If swallowed, wash out mouth with water provided person is
conscious. Call a physician.

---

ALDRICHwww.molbase.com
5 - Fire Fighting Measures

---

EXTINGUISHING MEDIA
Suitable: Water spray. Carbon dioxide, dry chemical powder, or
appropriate foam.
SPECIAL RISKS
Specific Hazard(s): Emits toxic fumes under fire conditions.
SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing
to prevent contact with skin and eyes.

---

6 - Accidental Release Measures

---

PROCEDURE(S) OF PERSONAL PRECAUTION(S)
Wear respirator, chemical safety goggles, rubber boots, and
heavy rubber gloves.
METHODS FOR CLEANING UP
Absorb on sand or vermiculite and place in closed containers for
disposal. Ventilate area and wash spill site after material
pickup is complete.

---

7 - Handling and Storage

---

HANDLING
Directions for Safe Handling: Avoid contact with eyes, skin, and
clothing. Do not breathe vapor. Avoid prolonged or repeated
exposure.
STORAGE
Conditions of Storage: Keep tightly closed.

---

8 - Exposure Controls / Personal Protection

---

ENGINEERING CONTROLS
Mechanical exhaust required.
GENERAL HYGIENE MEASURES
Wash thoroughly after handling. Wash contaminated clothing before
reuse.
PERSONAL PROTECTIVE EQUIPMENT
Respiratory Protection: Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US)
or CEN (EU). Where risk assessment shows air-purifying respirators
are appropriate use a full-face respirator with multi-purpose
combination (US) or type ABEK (EN 14387) respirator cartridges as
a backup to engineering controls. If the respirator is the sole
means of protection, use a full-face supplied air respirator.
Special Protective Measures: Wear appropriate government approved
respirator, chemical-resistant gloves, safety goggles, other
protective clothing.

---

9 - Physical and Chemical Properties

---

AppearancePhysical State: Liquid
PropertyValueAt Temperature or Pressure
ALDRICHwww.molbase.com
pH N/A
BP/BP RangeN/A
MP/MP RangeN/A
Flash PointN/A
FlammabilityN/A
Autoignition TempN/A
Oxidizing Properties N/A
Explosive Properties N/A
Explosion LimitsN/A
Vapor PressureN/A
Partition Coefficient Log Kow: 0,501
ViscosityN/A
Vapor DensityN/A
Saturated Vapor Conc. N/A
Evaporation RateN/A
Bulk DensityN/A
Decomposition Temp.N/A
Solvent ContentN/A
Water ContentN/A
Surface TensionN/A
ConductivityN/A
Miscellaneous DataN/A
SolubilityN/A

---

10 - Stability and Reactivity

---

STABILITY
Stable: Stable.
Materials to Avoid: Oxidizing agents.
HAZARDOUS POLYMERIZATION
Hazardous Polymerization: Will not occur

---

11 - Toxicological Information

---

SENSITIZATION
Sensitization: Sensitizer.
Skin: The preceding data, or interpretation of data, was
determined using Quantitative Structure Activity Relationship
(QSAR) modeling. May cause allergic skin reaction.
SIGNS AND SYMPTOMS OF EXPOSURE
To the best of our knowledge, the chemical, physical, and
toxicological properties have not been thoroughly investigated.
ROUTE OF EXPOSURE
Skin Contact: May cause skin irritation.
Skin Absorption: May be harmful if absorbed through the skin.
Eye Contact: May cause eye irritation.
Inhalation: May be harmful if inhaled. Material may be
irritating to mucous membranes and upper respiratory tract.
Ingestion: Harmful if swallowed.

---

12 - Ecological Information

---

No data available.

---

13 - Disposal Considerations

---

ALDRICHwww.molbase.com
SUBSTANCE DISPOSAL
Contact a licensed professional waste disposal service to dispose
of this material. Dissolve or mix the material with a combustible
solvent and burn in a chemical incinerator equipped with an
afterburner and scrubber. Observe all federal, state, and local
environmental regulations.

---

14 - Transport Information

---

RID/ADR
Non-hazardous for road transport.
IMDG
Non-hazardous for sea transport.
IATA
Non-hazardous for air transport.

---

15 - Regulatory Information

---

CLASSIFICATION AND LABELING ACCORDING TO EU DIRECTIVES
INDICATION OF DANGER: Xn
Harmful.
R-PHRASES: 22-43
Harmful if swallowed. May cause sensitization by skin contact.
S-PHRASES: 36/37
Wear suitable protective clothing and gloves.
Caution: Substance not yet fully tested (EU).

---

16 - Other Information

---

WARRANTY
The above information is believed to be correct but does not
purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our
knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Inc.,
shall not be held liable for any damage resulting from handling or
from contact with the above product. See reverse side of invoice
or packing slip for additional terms and conditions of sale.
Copyright 2010 Co. License granted to make
unlimitedpaper copies for internal use only.
DISCLAIMER
For R&D use only. Not for drug, household or other uses.
ALDRICHwww.molbase.com

---

SECTION 16 - ADDITIONAL INFORMATION
N/A