3-Chloro-2,6-difluorophenol

Modify Date: 2024-02-04 18:01:29

3-Chloro-2,6-difluorophenol Structure
3-Chloro-2,6-difluorophenol structure
Common Name 3-Chloro-2,6-difluorophenol
CAS Number 261762-51-0 Molecular Weight 164.53700
Density 1.52g/cm3 Boiling Point 168.3ºC at 760mmHg
Molecular Formula C6H3ClF2O Melting Point N/A
MSDS USA Flash Point 55.6ºC

 Names

Name 3-Chloro-2,6-difluorophenol
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.52g/cm3
Boiling Point 168.3ºC at 760mmHg
Molecular Formula C6H3ClF2O
Molecular Weight 164.53700
Flash Point 55.6ºC
Exact Mass 163.98400
PSA 20.23000
LogP 2.32380
Vapour Pressure 1.23mmHg at 25°C
Index of Refraction 1.522

 MSDS

Material Safety Data Sheet

Section1. Identification of the substance
Product Name: 3-Chloro-2,6-difluorophenol
Synonyms:

Section2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.
H301:Toxic if swallowed
H311:Toxic in contact with skin
H314:Causes severe skin burns and eye damage
H318:Causes serious eye damage
H411:Toxic to aquatic life with long lasting effects
H401:Toxic to aquatic life
P260:Do not breathe dust/fume/gas/mist/vapours/spray
P301+P310:IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician
P303+P361+P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with
water/shower
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present
and easy to do – continue rinsing
P361:Remove/Take off immediately all contaminated clothing
P405:Store locked up

Section3. Composition/information on ingredients.
Ingredient name:3-Chloro-2,6-difluorophenol
CAS number:261762-51-0

Section4. First aid measures
Skin contact:Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact:Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.
Ingestion:

Section5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

Section6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution:Wear approved mask/respirator
Hand precaution:Wear suitable gloves/gauntlets
Skin protection:Wear suitable protective clothing
Eye protection:Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

Section7. Handling and storage
This product should be handled only by, or under the close supervision of, those properly qualified
Handling:
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Storage:Store in closed vessels.

Section8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

Section9. Physical and chemical properties
Appearance:Not specified
Boiling point:No data
Melting point:No data
Flash point:No data
Density:No data
Molecular formula:C6H3ClF2O
164.5
Molecular weight:

Section10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, hydrogen chloride, hydrogen fluoride.

Section11. Toxicological information
No data.

Section12. Ecological information
No data.

Section13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

Section14. Transportation information
UN Number:UN3265 Class: 8 Packing group: III
Proper shipping name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (3-Chloro-2,6-difluorophenol)

Section15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Hazard Codes T: Toxic;
Risk Phrases R20/21/22
Safety Phrases S26;S36/S37/S39
RIDADR UN 2811
Packaging Group III
Hazard Class 8.0
HS Code 2908199090

 Precursor & DownStream

Precursor  1

DownStream  0

 Customs

HS Code 2908199090
Summary HS: 2908199090. derivatives of polyphenols or phenol-alcohols containing only halogen substituents and their salts. VAT:17.0%. tax rebate rate:9.0%. supervision conditions:None. MFN tariff:5.5%. general tariff:30.0%

 Synonyms

3-chloro-2,6-difluoro-phenol
MFCD01631330
Top Suppliers:I want be here


Get all suppliers and price by the below link:

3-Chloro-2,6-difluorophenol suppliers

3-Chloro-2,6-difluorophenol price