acetylacrylic acid methyl ester

Modify Date: 2024-01-08 19:01:14

acetylacrylic acid methyl ester Structure
acetylacrylic acid methyl ester structure
Common Name acetylacrylic acid methyl ester
CAS Number 2833-24-1 Molecular Weight 128.12600
Density N/A Boiling Point N/A
Molecular Formula C6H8O3 Melting Point 59-61 ℃(lit.)
MSDS USA Flash Point N/A
Symbol GHS07
GHS07
Signal Word Warning

 Names

Name acetylacrylic acid methyl ester
Synonym More Synonyms

 Chemical & Physical Properties

Melting Point 59-61 ℃(lit.)
Molecular Formula C6H8O3
Molecular Weight 128.12600
Exact Mass 128.04700
PSA 43.37000
LogP 0.30460

 MSDS


SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name: Methyl trans-4-oxo-2-pentenoate
REACH No.: A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No.: 2833-24-1
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances



SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Skin irritation (Category 2), H315
Eye irritation (Category 2), H319
Specific target organ toxicity - single exposure (Category 3), H335
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Xi IrritantR36/37/38
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal wordWarning
Hazard statement(s)
H315Causes skin irritation.
H319Causes serious eye irritation.
H335May cause respiratory irritation.
Precautionary statement(s)
P261Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
P305 + P351 + P338IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazardnone
Statements
Other hazards - none

SECTION 3: Composition/information on ingredients
Substances
Chemical characterization : Natural product
: Methyl trans-β-acetylacrylate
Synonyms
Formula: C6H8O3
Molecular Weight: 128,13 g/mol
CAS-No.: 2833-24-1
Hazardous ingredients according to Regulation (EC) No 1272/2008
ComponentClassificationConcentration
Methyl (E)-4-oxopent-2-enoate
CAS-No.2833-24-1Skin Irrit. 2; Eye Irrit. 2; STOT<= 100 %
SE 3; H315, H319, H335
Hazardous ingredients according to Directive 1999/45/EC
ComponentClassificationConcentration
Methyl (E)-4-oxopent-2-enoate
CAS-No.2833-24-1Xi, R36/37/38<= 100 %
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
protection.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Recommended storage temperature: 2 - 8 °C
Specific end use(s)
A part from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Z677272, Size M)
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Z677272, Size M)
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, test method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374,
contact the supplier of the CE approved gloves. This recommendation is advisory only and must
be evaluated by an industrial hygienist and safety officer familiar with the specific situation of
anticipated use by our customers. It should not be construed as offering an approval for any
specific use scenario.
Body Protection
impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher
level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges.
Use respirators and components tested and approved under appropriate government standards
such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) AppearanceForm: crystalline
Colour: light yellow
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezingMelting point/range: 59 - 61 °C
point
f) Initial boiling point and no data available
boiling range
g) Flash pointno data available
h) Evapouration rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative densityno data available
n) Water solubilityno data available
o) Partition coefficient: n- no data available
octanol/water
p) Auto-ignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
Inhalation - May cause respiratory irritation.
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
professional waste disposal service to dispose of this material. Dissolve or mix the material with a
combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

SECTION 14: Transport information
UN number
ADR/RID: -IMDG: -IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA:Not dangerous goods
Transport hazard class(es)
ADR/RID: -IMDG: -IATA: -
Packaging group
ADR/RID: -IMDG: -IATA: -
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
no data available



SECTION 15 - REGULATORY INFORMATION
N/A


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Symbol GHS07
GHS07
Signal Word Warning
Hazard Statements H315-H319-H335
Precautionary Statements P261-P305 + P351 + P338
Personal Protective Equipment dust mask type N95 (US);Eyeshields;Gloves
Hazard Codes Xi
Risk Phrases 36/37/38
Safety Phrases 26-36
RIDADR NONH for all modes of transport

 Synthetic Route

~42%

acetylacrylic acid methyl ester Structure

acetylacrylic a...

CAS#:2833-24-1

Literature: Choi; Choon Woo Lee; Chatterjee; Grubbs Journal of the American Chemical Society, 2001 , vol. 123, # 42 p. 10417 - 10418

~50%

acetylacrylic acid methyl ester Structure

acetylacrylic a...

CAS#:2833-24-1

Literature: Mamaghani, Manouchehr; Alizadehnia, Alireza Journal of Chemical Research - Part S, 2002 , # 8 p. 386 - 387

~%

acetylacrylic acid methyl ester Structure

acetylacrylic a...

CAS#:2833-24-1

Literature: Cardellach, J.; Estopa, C.; Font, J.; Moreno-Manas, M.; Ortuno, R. M.; et al. Tetrahedron, 1982 , vol. 38, # 15 p. 2377 - 2394

~88%

acetylacrylic acid methyl ester Structure

acetylacrylic a...

CAS#:2833-24-1

Literature: Schuda, Paul Francis; Ebner, Cynthia B.; Potlock, Steven J. Synthesis, 1987 , # 12 p. 1055 - 1057

~%

acetylacrylic acid methyl ester Structure

acetylacrylic a...

CAS#:2833-24-1

Literature: Boehm, Ingrid; Schulz, Rick; Reissig, Hans-Ulrich Tetrahedron Letters, 1982 , vol. 23, # 19 p. 2013 - 2016

~%

acetylacrylic acid methyl ester Structure

acetylacrylic a...

CAS#:2833-24-1

Literature: Kulinkovich, O. G.; Tischenko, I. G.; Romashin, J. N.; Savitskaya, L. N. Synthesis, 1986 , # 5 p. 378 - 379

~%

acetylacrylic acid methyl ester Structure

acetylacrylic a...

CAS#:2833-24-1

Literature: Verhe,R. et al. Journal of Organic Chemistry, 1977 , vol. 42, # 7 p. 1256 - 1258

~%

acetylacrylic acid methyl ester Structure

acetylacrylic a...

CAS#:2833-24-1

Literature: Verhe,R. et al. Journal of Organic Chemistry, 1977 , vol. 42, # 7 p. 1256 - 1258

 Articles4

More Articles
M. Miyashita et al.

J. Org. Chem. 49 , 2857, (1984)

A.E. Ashcroft et al.

Tetrahedron 40 , 4579, (1984)

C.J. Kowalski, G.S. Lal

J. Am. Chem. Soc. 110 , 3693, (1988)

 Synonyms

methyl trans-4-oxo-2-pentanoate
METHYL TRANS-BRAVO-ACETYLACRYLATE
MFCD00059331
methyl-trans-4-oxo-2-pentenoate
METHYL ACETYLACRYLATE
Top Suppliers:I want be here


Get all suppliers and price by the below link:

acetylacrylic acid methyl ester suppliers

acetylacrylic acid methyl ester price