3-bromo-2-methylthiophene

Modify Date: 2024-01-09 19:36:58

3-bromo-2-methylthiophene Structure
3-bromo-2-methylthiophene structure
Common Name 3-bromo-2-methylthiophene
CAS Number 30319-05-2 Molecular Weight 177.062
Density 1.6±0.1 g/cm3 Boiling Point 179.0±20.0 °C at 760 mmHg
Molecular Formula C5H5BrS Melting Point N/A
MSDS N/A Flash Point 62.0±21.8 °C

 Names

Name 3-bromo-2-methylthiophene
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.6±0.1 g/cm3
Boiling Point 179.0±20.0 °C at 760 mmHg
Molecular Formula C5H5BrS
Molecular Weight 177.062
Flash Point 62.0±21.8 °C
Exact Mass 175.929520
PSA 28.24000
LogP 3.08
Vapour Pressure 1.3±0.3 mmHg at 25°C
Index of Refraction 1.582
Storage condition -20°C

 MSDS

Material Safety Data Sheet

Section1. Identification of the substance
Product Name: 3-Bromo-2-methylthiophene
Synonyms:

Section2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.

Section3. Composition/information on ingredients.
Ingredient name:3-Bromo-2-methylthiophene
CAS number:30319-05-2

Section4. First aid measures
Skin contact:Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact:Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion:Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

Section5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

Section6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution:Wear approved mask/respirator
Hand precaution:Wear suitable gloves/gauntlets
Skin protection:Wear suitable protective clothing
Eye protection:Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

Section7. Handling and storage
Handling:This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Store in closed vessels, refrigerated.
Storage:

Section8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

Section9. Physical and chemical properties
Appearance:Not specified
Boiling point:No data
No data
Melting point:
Flash point:No data
Density:No data
Molecular formula:C5H5BrS
Molecular weight:177.1

Section10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, hydrogen bromide, sulfur oxides.

Section11. Toxicological information
No data.

Section12. Ecological information
No data.

Section13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

Section14. Transportation information
Non-harzardous for air and ground transportation.

Section15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Hazard Codes Xi: Irritant;
RIDADR 1992.0
Hazard Class 3,6.1
HS Code 2934999090

 Synthetic Route

~92%

3-bromo-2-methylthiophene Structure

3-bromo-2-methy...

CAS#:30319-05-2

Literature: Graf, David D; Soto, Jorge Patent: US2005/10039 A1, 2005 ; Location in patent: Page 16 ;

~%

3-bromo-2-methylthiophene Structure

3-bromo-2-methy...

CAS#:30319-05-2

Literature: Justus Liebigs Annalen der Chemie, , vol. 513, p. 281,291

~%

3-bromo-2-methylthiophene Structure

3-bromo-2-methy...

CAS#:30319-05-2

Literature: Synthetic Communications, , vol. 11, # 1 p. 25 - 28

~70%

3-bromo-2-methylthiophene Structure

3-bromo-2-methy...

CAS#:30319-05-2

Literature: MacDowell, Denis W. H.; Purpura, Joseph M. Journal of Organic Chemistry, 1986 , vol. 51, # 2 p. 183 - 188

~%

3-bromo-2-methylthiophene Structure

3-bromo-2-methy...

CAS#:30319-05-2

Literature: US5696151 A1, ;

~%

3-bromo-2-methylthiophene Structure

3-bromo-2-methy...

CAS#:30319-05-2

Literature: Synthetic Communications, , vol. 22, # 8 p. 1095 - 1099

 Customs

HS Code 2934999090
Summary 2934999090. other heterocyclic compounds. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0%

 Synonyms

3-Bromo-2-methylthiophene
3-bromo-2-methyl-thiophene
3-Thenylbromide
3-Brom-2-methyl-thiophen
2-Methyl-3-bromothiophene
Thiophene, 3-bromo-2-methyl-
2-Methyl-3-brom-thiophen
Top Suppliers:I want be here



Get all suppliers and price by the below link:

3-bromo-2-methylthiophene suppliers


Price: ¥1482/5g

Reference only. check more 3-bromo-2-methylthiophene price