DI-[3-((R)-2,2'-DIHYDROXY- 1,1'-BINAPHTHYLMETHYL)]ETHER, LANTHANUM (III) SALT, TETRAHYDROFURAN ADDUCT SCT-(R)-BINOL

Modify Date: 2024-01-04 07:14:22

DI-[3-((R)-2,2'-DIHYDROXY- 1,1'-BINAPHTHYLMETHYL)]ETHER, LANTHANUM (III) SALT, TETRAHYDROFURAN ADDUCT SCT-(R)-BINOL Structure
DI-[3-((R)-2,2'-DIHYDROXY- 1,1'-BINAPHTHYLMETHYL)]ETHER, LANTHANUM (III) SALT, TETRAHYDROFURAN ADDUCT SCT-(R)-BINOL structure
Common Name DI-[3-((R)-2,2'-DIHYDROXY- 1,1'-BINAPHTHYLMETHYL)]ETHER, LANTHANUM (III) SALT, TETRAHYDROFURAN ADDUCT SCT-(R)-BINOL
CAS Number 321837-08-5 Molecular Weight 871.76400
Density N/A Boiling Point N/A
Molecular Formula C48H44LaO7 Melting Point N/A
MSDS N/A Flash Point N/A

 Names

Name 2-Naphthalenol, 1,1'-[oxybis(methylene)]bis-, compd. with tetrahy drofuran, lanthanum salt (2:1:1)
Synonym More Synonyms

 Chemical & Physical Properties

Molecular Formula C48H44LaO7
Molecular Weight 871.76400
Exact Mass 871.21500
PSA 108.61000
LogP 11.03880

 MSDS


Section 1: Product Identification
Di-[3-((R)-2,2'-dihydroxy-1,1'-binaphthylmethyl)]ether, lanthanum (III) salt, tetrahydrofuran adduct
Chemical Name:
SCT-(R)-BINOL
CAS Registry Number:321837-08-5
Formula:C42H27LaO5.C4H8O
EINECS Number:none
Chemical Family:metal alkoxide
Synonym:none

Section 2: Composition and Information on Ingredients
IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL)
Title compound321837-08-5100%no datano data

Section 3: Hazards Identification
Emergency Overview:Irritating to eyes and skin. May be harmful if swallowed or inhaled.
Primary Routes of Exposure:Ingestion
Eye Contact:Causes mild irritation of the eyes.
Skin Contact:Causes slight irritation of the skin.
Inhalation:Inhalation of dust may lead to irritation of the respiratory tract.
Ingestion:No information is available on the physiological effects of ingestion. May be harmful if swallowed.
Acute Health Affects:Irritating to eyes and skin. May be harmful if swallowed or inhaled.
Chronic Health Affects:No information available on long-term chronic effects.
NTP:No
IARC:No
OSHA:No

SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with soap and water. Remove contaminated clothes if necessary. Seek medical
Skin Exposure:
assistance if irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
Inhalation:
in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Ingestion:Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious).

SECTION 5: Fire Fighting Measures
Flash Point:no data
Autoignition Temperature:no data
Explosion Limits:no data
Extinguishing Medium:carbon dioxide, dry powder or foam
If involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained
Special Fire Fighting Procedures:
breathing apparatus and full protective clothing.
Hazardous Combustion andIf involved in a fire this material may emit toxic organic fumes.
Decomposion Products:
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
Spill and Leak Procedures:Small spills can be mixed with vermiculite or sodium carbonate and swept up.

SECTION 7: Handling and Storage
Handling and Storage:Store in a sealed container. Keep away from heat and moisture.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:Wear appropriate chemical resistant gloves and protective clothing.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators
Respirator:
requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
Additional Protection:No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:pale yellow pwdr.
Molecular Weight:822.67
Melting Point:no data
Boiling Point:no data
Vapor Pressure:no data
Specific Gravity:no data
Odor:organic odor
Solubility in Water:soluble

SECTION 10: Stability and Reactivity
Stability:air and moisture stable solid
Hazardous Polymerization:no hazardous polymerization
Conditions to Avoid:none
Incompatibility:oxidizing agents and halogens.
Decomposition Products:Carbon dioxide, carbon monoxide, organic vapors, and metal oxides and carbonates.

SECTION 11: Toxicological Information
RTECS Data:No information available in the RTECS files.
Carcinogenic Effects:No data available
Mutagenic Effects:No data available
Tetratogenic Effects:No data available

SECTION 12: Ecological Information
Ecological Information:No information available

SECTION 13: Disposal Considerations
Disposal:Dispose of according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):Non-hazardous
Hazard Class (CFR):NA
Additional Hazard Class (CFR):NA
Packaging Group (CFR):NA
UN ID Number (CFR):NA
Shipping Name (IATA):Non-hazardous
Hazard Class (IATA):NA
Additional Hazard Class (IATA):NA
Packaging Group (IATA):NA
UN ID Number (IATA):NA

SECTION 15: Regulatory Information
TSCA:Not listed in the TSCA inventory.
SARA (Title 313):Title compound not listed.
Second Ingredient:none


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Synonyms

MFCD03098649