2,4-Dichloro-3-iodopyridine

Modify Date: 2024-01-11 23:03:50

2,4-Dichloro-3-iodopyridine Structure
2,4-Dichloro-3-iodopyridine structure
Common Name 2,4-Dichloro-3-iodopyridine
CAS Number 343781-36-2 Molecular Weight 273.887
Density 2.1±0.1 g/cm3 Boiling Point 290.3±35.0 °C at 760 mmHg
Molecular Formula C5H2Cl2IN Melting Point 90-94℃
MSDS Chinese USA Flash Point 129.4±25.9 °C
Symbol GHS05 GHS07
GHS05, GHS07
Signal Word Danger

 Names

Name 2,4-Dichloro-3-iodopyridine
Synonym More Synonyms

 Chemical & Physical Properties

Density 2.1±0.1 g/cm3
Boiling Point 290.3±35.0 °C at 760 mmHg
Melting Point 90-94℃
Molecular Formula C5H2Cl2IN
Molecular Weight 273.887
Flash Point 129.4±25.9 °C
Exact Mass 272.860901
PSA 12.89000
LogP 3.45
Vapour Pressure 0.0±0.6 mmHg at 25°C
Index of Refraction 1.652

 MSDS


Section1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product identifiers
Product name: 2,4-Dichloro-3-iodopyridine
CAS-No.: 343781-36-2
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances



Section2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Acute toxicity, Oral (Category 4)
Serious eye damage (Category 1)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Harmful if swallowed. Risk of serious damage to eyes.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal wordDanger
Hazard statement(s)
H302Harmful if swallowed.
H318Causes serious eye damage.
Precautionary statement(s)
P280Wear protective gloves/ eye protection/ face protection.
P305 + P351 + P338IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazardnone
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R22Harmful if swallowed.
R41Risk of serious damage to eyes.
S-phrase(s)
S26In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
S39Wear eye/face protection.
Other hazards - none

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Formula: C5H2Cl2IN
Molecular Weight: 249,80 g/mol
ComponentConcentration
2,4-Dichloro-3-iodopyridine
CAS-No.343781-36-2-

Section4. FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly
investigated.
Indication of any immediate medical attention and special treatment needed
no data available

Section5. FIRE-FIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
no data available
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

Section7. HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end uses
no data available

Section8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at
the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the
standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering
controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
respirators and components tested and approved under appropriate government standards such as
NIOSH (US) or CEN (EU).

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a) AppearanceForm: solid
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezingMelting point/range: 90 - 94 °C
point
f) Initial boiling point and no data available
boiling range
g) Flash pointno data available
h) Evaporation rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour density8,62 - (Air = 1.0)
m) Relative densityno data available
n) Water solubilityno data available
o) Partition coefficient: n- log Pow: 3,265
octanol/water
p) Autoignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

Section10. STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available

Section11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
InhalationMay be harmful if inhaled. May cause respiratory tract irritation.
IngestionHarmful if swallowed.
SkinMay be harmful if absorbed through skin. May cause skin irritation.
EyesCauses eye burns.
Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly
investigated.
Additional Information
RTECS: Not available

Section12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available

Section13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

Section14. TRANSPORT INFORMATION
UN number
ADR/RID: 2811IMDG: 2811IATA: 2811
UN proper shipping name
ADR/RID: TOXIC SOLID, ORGANIC, N.O.S. (2,4-Dichloro-3-iodopyridine)
IMDG: TOXIC SOLID, ORGANIC, N.O.S. (2,4-Dichloro-3-iodopyridine)
IATA:Toxic solid, organic, n.o.s. (2,4-Dichloro-3-iodopyridine)
Transport hazard class(es)
ADR/RID: 6.1IMDG: 6.1IATA: 6.1
Packaging group
ADR/RID: IIIIMDG: IIIIATA: III
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
no data available



SECTION 15 - REGULATORY INFORMATION
N/A


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Symbol GHS05 GHS07
GHS05, GHS07
Signal Word Danger
Hazard Statements H302-H318
Precautionary Statements P280-P305 + P351 + P338
Hazard Codes Xn
Risk Phrases 22-41
Safety Phrases 26-39
RIDADR UN 2811
HS Code 2933399090

 Synthetic Route

~78%

2,4-Dichloro-3-iodopyridine Structure

2,4-Dichloro-3-...

CAS#:343781-36-2

Literature: ORTHO-MCNEIL-JANSSEN PHARMACEUTICALS, INC; ADDEX PHARMA S.A.; CID-NUNEZ, Jose, Maria; DE LUCAS OLIVARES, Ana, Isabel; TRABANCO-SUAREZ, Andres, Avelino; MACDONALD, Gregor, James Patent: WO2010/130423 A1, 2010 ; Location in patent: Page/Page column 53 ; WO 2010/130423 A1

~%

2,4-Dichloro-3-iodopyridine Structure

2,4-Dichloro-3-...

CAS#:343781-36-2

Literature: WO2011/32277 A1, ; Page/Page column 40-41 ; WO 2011/032277 A1

~%

2,4-Dichloro-3-iodopyridine Structure

2,4-Dichloro-3-...

CAS#:343781-36-2

Literature: WO2011/32277 A1, ; WO 2011/032277 A1

~%

2,4-Dichloro-3-iodopyridine Structure

2,4-Dichloro-3-...

CAS#:343781-36-2

Literature: European Journal of Organic Chemistry, , # 7 p. 1371 - 1376

~%

2,4-Dichloro-3-iodopyridine Structure

2,4-Dichloro-3-...

CAS#:343781-36-2

Literature: European Journal of Organic Chemistry, , # 7 p. 1371 - 1376

~%

2,4-Dichloro-3-iodopyridine Structure

2,4-Dichloro-3-...

CAS#:343781-36-2

Literature: European Journal of Organic Chemistry, , # 7 p. 1371 - 1376

 Customs

HS Code 2933399090
Summary 2933399090. other compounds containing an unfused pyridine ring (whether or not hydrogenated) in the structure. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0%

 Articles1

More Articles
Self-selection in the self-assembly of isomeric supramolecular squares from unsymmetrical bis(4-pyridyl)acetylene ligands.

J. Org. Chem. 73(17) , 6580-6, (2008)

A new approach wherein steric interactions between substituents of unsymmetrical bis(4-pyridyl)acetylene ligands dictate the self-selection of single isomers of [4 + 4] self-assembled squares is prese...

 Synonyms

2,4-dichloro-3-iodo-pyridine
Pyridine, 2,4-dichloro-3-iodo-
Top Suppliers:I want be here


Get all suppliers and price by the below link:

2,4-Dichloro-3-iodopyridine suppliers

2,4-Dichloro-3-iodopyridine price