(4-Bromophenoxy)acetonitrile structure
|
Common Name | (4-Bromophenoxy)acetonitrile | ||
---|---|---|---|---|
CAS Number | 39489-67-3 | Molecular Weight | 212.043 | |
Density | 1.5±0.1 g/cm3 | Boiling Point | 303.1±17.0 °C at 760 mmHg | |
Molecular Formula | C8H6BrNO | Melting Point | 52-54 °C | |
MSDS | N/A | Flash Point | 137.1±20.9 °C |
Name | 2-(4-bromophenoxy)acetonitrile |
---|---|
Synonym | More Synonyms |
Density | 1.5±0.1 g/cm3 |
---|---|
Boiling Point | 303.1±17.0 °C at 760 mmHg |
Melting Point | 52-54 °C |
Molecular Formula | C8H6BrNO |
Molecular Weight | 212.043 |
Flash Point | 137.1±20.9 °C |
Exact Mass | 210.963272 |
PSA | 33.02000 |
LogP | 2.85 |
Vapour Pressure | 0.0±0.6 mmHg at 25°C |
Index of Refraction | 1.561 |
Material Safety Data Sheet
Section1. Identification of the substance Product Name: 2-(4-Bromophenoxy)acetonitrile Synonyms: Section2. Hazards identification Harmful by inhalation, in contact with skin, and if swallowed. H331:Toxic if inhaled
H302:Harmful if swallowed H312:Harmful in contact with skin Causes skin irritation H315: H319:Causes serious eye irritation H335:May cause respiratory irritation P261:Avoid breathing dust/fume/gas/mist/vapours/spray P280:Wear protective gloves/protective clothing/eye protection/face protection P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing P304+P340:IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing P405:Store locked up Section3. Composition/information on ingredients. Ingredient name:2-(4-Bromophenoxy)acetonitrile CAS number:39489-67-3 Section4. First aid measures Skin contact:Immediately wash skin with copious amounts of water for at least 15 minutes while removing contaminated clothing and shoes. If irritation persists, seek medical attention. Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate Eye contact: flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical attention. Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention. Ingestion:Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention. Section5. Fire fighting measures In the event of a fire involving this material, alone or in combination with other materials, use dry powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus should be worn. Section6. Accidental release measures Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national standards. Respiratory precaution:Wear approved mask/respirator Hand precaution:Wear suitable gloves/gauntlets Skin protection:Wear suitable protective clothing Eye protection:Wear suitable eye protection Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container for disposal. See section 12. Environmental precautions: Do not allow material to enter drains or water courses. Section7. Handling and storage Handling:This product should be handled only by, or under the close supervision of, those properly qualified in the handling and use of potentially hazardous chemicals, who should take into account the fire, health and chemical hazard data given on this sheet. Storage:Store in closed vessels. Section8. Exposure Controls / Personal protection Engineering Controls: Use only in a chemical fume hood. Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles. General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse. Section9. Physical and chemical properties Not specified Appearance: Boiling point:No data Melting point:No data Flash point:No data Density:No data Molecular formula: C8H6BrNO Molecular weight: 212.0 Section10. Stability and reactivity Conditions to avoid: Heat, flames and sparks. Materials to avoid: Oxidizing agents. Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, hydrogen bromide. Section11. Toxicological information No data. Section12. Ecological information No data. Section13. Disposal consideration Arrange disposal as special waste, by licensed disposal company, in consultation with local waste disposal authority, in accordance with national and regional regulations. Section14. Transportation information UN Number:UN3439Class: 6.1Packing group: III Proper shipping name: NITRILES, TOXIC, SOLID, N.O.S. (2-(4-Bromophenoxy)acetonitrile) Section15. Regulatory information No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302, or have known CAS numbers that exceed the threshold reporting levels established by SARA Title III, Section 313. SECTION 16 - ADDITIONAL INFORMATION N/A |
RIDADR | UN3439 |
---|---|
Packaging Group | III |
Hazard Class | 6.1 |
HS Code | 2926909090 |
~97% (4-Bromophenoxy... CAS#:39489-67-3 |
Literature: ELI LILLY AND COMPANY Patent: WO2005/40110 A1, 2005 ; Location in patent: Page/Page column 103 ; |
~67% (4-Bromophenoxy... CAS#:39489-67-3 |
Literature: Yu, Guanping; Kuo, David; Shoham, Menachem; Viswanathan, Rajesh ACS Combinatorial Science, 2014 , vol. 16, # 2 p. 85 - 91 |
~97% (4-Bromophenoxy... CAS#:39489-67-3 |
Literature: Barkin, Julia L.; Faust Jr., Marcus D.; Trenkle, William C. Organic Letters, 2003 , vol. 5, # 18 p. 3333 - 3335 |
Precursor 3 | |
---|---|
DownStream 0 |
HS Code | 2926909090 |
---|---|
Summary | HS:2926909090 other nitrile-function compounds VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:6.5% General tariff:30.0% |
4-Bromophenoxyacetonitrile |
Acetonitrile, 2-(4-bromophenoxy)- |
(4-Bromophenoxy)acetonitrile |