1-[chloro(phenyl)methyl]-2-methylbenzene structure
|
Common Name | 1-[chloro(phenyl)methyl]-2-methylbenzene | ||
---|---|---|---|---|
CAS Number | 41870-52-4 | Molecular Weight | 216.70600 | |
Density | 1.098g/cm3 | Boiling Point | 313.9ºC at 760mmHg | |
Molecular Formula | C14H13Cl | Melting Point | 76-78 °C(lit.) | |
MSDS | N/A | Flash Point | 138.6ºC |
Name | 2-Methylbenzhydryl Chloride |
---|---|
Synonym | More Synonyms |
Density | 1.098g/cm3 |
---|---|
Boiling Point | 313.9ºC at 760mmHg |
Melting Point | 76-78 °C(lit.) |
Molecular Formula | C14H13Cl |
Molecular Weight | 216.70600 |
Flash Point | 138.6ºC |
Exact Mass | 216.07100 |
LogP | 4.32320 |
Index of Refraction | 1.576 |
Revision number: 5
2-Methylbenzhydryl Chloride SAFETY DATA SHEET Section1. IDENTIFICATION 2-Methylbenzhydryl Chloride Product name: 5 Revision number: Section2. HAZARDS IDENTIFICATION GHS classification Not classified PHYSICAL HAZARDS HEALTH HAZARDS Category 2 Skin corrosion/irritation ENVIRONMENTAL HAZARDS Category 1 Acute aquatic hazard Category 1 Long-term aquatic hazard GHS label elements, including precautionary statements Pictograms or hazard symbols Warning Signal word Causes skin irritation Hazard statements Very toxic to aquatic life Very toxic to aquatic life with long lasting effects Precautionary statements: Avoid release to the environment. [Prevention] Wash hands thoroughly after handling. Wear protective gloves/eye protection/face protection. IF ON SKIN: Gently wash with plenty of soap and water. [Response] If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Collect spillage. Dispose of contents/container through a waste management company authorized by [Disposal] the local government. Section3. COMPOSITION/INFORMATION ON INGREDIENTS Substance Substance/mixture: 2-Methylbenzhydryl Chloride Components: >98.0%(GC)(T) Percent: 41870-52-4 CAS Number: 2-(α-Chlorobenzyl)toluene , Chloro(2-methylphenyl)phenylmethane Synonyms: C14H13Cl Chemical Formula: 2-Methylbenzhydryl Chloride Section4. FIRST AID MEASURES Remove victim to fresh air and keep at rest in a position comfortable for breathing. Inhalation: Get medical advice/attention if you feel unwell. Remove/Take off immediately all contaminated clothing. Gently wash with plenty of Skin contact: soap and water. If skin irritation or rash occurs: Get medical advice/attention. Rinse cautiously with water for several minutes. Remove contact lenses, if present Eye contact: and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Get medical advice/attention if you feel unwell. Rinse mouth. Ingestion: A rescuer should wear personal protective equipment, such as rubber gloves and air- Protection of first-aiders: tight goggles. Section5. FIRE-FIGHTING MEASURES Dry chemical, foam, water spray, carbon dioxide. Suitable extinguishing media: Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to generate poisonous fume. from the chemical: Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place. In case of fire in the surroundings: Remove movable containers if safe to do so. When extinguishing fire, be sure to wear personal protective equipment. Special protective equipment for firefighters: Section6. ACCIDENTAL RELEASE MEASURES Use personal protective equipment. Keep people away from and upwind of spill/leak. Personal precautions, protective equipment and Entry to non-involved personnel should be controlled around the leakage area by emergency procedures: roping off, etc. Environmental precautions: Be careful not to let it flow into rivers, etc., since adverse effects on the environment are concerned. Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it. containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with up: appropriate laws and regulations. Section7. HANDLING AND STORAGE Precautions for safe handling Handling is performed in a well ventilated place. Wear suitable protective equipment. Technical measures: Prevent dispersion of dust. Wash hands and face thoroughly after handling. Use a local exhaust if dust or aerosol will be generated. Advice on safe handling: Avoid contact with skin, eyes and clothing. Conditions for safe storage, including any incompatibilities Keep container tightly closed. Store in a refrigerator. Storage conditions: Store away from incompatible materials such as oxidizing agents. Heat-sensitive Comply with laws. Packaging material: Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION Install a closed system or local exhaust as possible so that workers should not be Engineering controls: exposed directly. Also install safety shower and eye bath. Personal protective equipment Respiratory protection: Dust respirator. Follow local and national regulations. Protective gloves. Hand protection: Safety glasses. A face-shield, if the situation requires. Eye protection: Skin and body protection: Protective clothing. Protective boots, if the situation requires. 2-Methylbenzhydryl Chloride Section9. PHYSICAL AND CHEMICAL PROPERTIES Solid Physical state (20°C): Crystal- Lump Form: White - Slightly pale yellow Colour: No data available Odour: pH: No data available Melting point/freezing point:40°C 136°C/0.1kPa Boiling point/range: No data available Flash point: Flammability or explosive limits: No data available Lower: No data available Upper: No data available Relative density: Solubility(ies): No data available [Water] [Other solvents] Methanol Soluble: Section10. STABILITY AND REACTIVITY Stable under proper conditions. Chemical stability: Possibility of hazardous No special reactivity has been reported. reactions: Incompatible materials: Oxidizing agents Hazardous decomposition Carbon monoxide, Carbon dioxide, Hydrogen chloride products: Section11. TOXICOLOGICAL INFORMATION No data available Acute Toxicity: Skin corrosion/irritation: No data available No data available Serious eye damage/irritation: No data available Germ cell mutagenicity: Carcinogenicity: No data available IARC = No data available NTP = No data available Reproductive toxicity: Section12. ECOLOGICAL INFORMATION Ecotoxicity: No data available Fish: No data available Crustacea: No data available Algae: Persistence / degradability: No data available No data available Bioaccumulative potential(BCF): Mobility in soil No data available Log Pow: No data available Soil adsorption (Koc): No data available Henry's Law constant(PaM3/mol): Section13. DISPOSAL CONSIDERATIONS Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when disposing of the substance. 2-Methylbenzhydryl Chloride Section14. TRANSPORT INFORMATION 9: Miscellaneous dangerous goods. Hazards Class: 3077 UN-No: Environmentally hazardous substance, solid, n.o.s. Proper shipping name: III Packing group: Y Marine pollutant Section15. REGULATORY INFORMATION Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002 and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were prescribed. SECTION 16 - ADDITIONAL INFORMATION N/A |
Hazard Codes | Xi |
---|---|
Risk Phrases | R36/37/38:Irritating to eyes, respiratory system and skin . |
Safety Phrases | S26-S36 |
WGK Germany | 3 |
HS Code | 2903999090 |
HS Code | 2903999090 |
---|---|
Summary | 2903999090 halogenated derivatives of aromatic hydrocarbons VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:5.5% General tariff:30.0% |
Chloro(2-methylphenyl)phenylmethane |
1-(Chloro(phenyl)methyl)-2-methylbenzene |
MFCD00972765 |
1-[chloro(phenyl)methyl]-2-methylbenzene |
2-(α-Chlorobenzyl)toluene |
EINECS 431-450-1 |