2-PHTHALIMIDOETHANESULFONYL CHLORIDE

Modify Date: 2024-01-07 15:43:51

2-PHTHALIMIDOETHANESULFONYL CHLORIDE Structure
2-PHTHALIMIDOETHANESULFONYL CHLORIDE structure
Common Name 2-PHTHALIMIDOETHANESULFONYL CHLORIDE
CAS Number 4403-36-5 Molecular Weight 273.69300
Density 1.585g/cm3 Boiling Point 416.5ºC at 760mmHg
Molecular Formula C10H8ClNO4S Melting Point 158-163ºC
MSDS Chinese USA Flash Point 205.7ºC
Symbol GHS05
GHS05
Signal Word Danger

 Names

Name 2-phthalimidoethanesulfonyl chloride
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.585g/cm3
Boiling Point 416.5ºC at 760mmHg
Melting Point 158-163ºC
Molecular Formula C10H8ClNO4S
Molecular Weight 273.69300
Flash Point 205.7ºC
Exact Mass 272.98600
PSA 79.90000
LogP 1.86990
Index of Refraction 1.624
Storage condition 2-8°C

 MSDS


SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name: 2-Phthalimidoethanesulfonyl chloride
REACH No.: A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No.: 4403-36-5
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances



SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Skin corrosion (Category 1B), H314
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
C CorrosiveR34
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal wordDanger
Hazard statement(s)
H314Causes severe skin burns and eye damage.
Precautionary statement(s)
P280Wear protective gloves/ protective clothing/ eye protection/ face
protection.
P305 + P351 + P338IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P310Immediately call a POISON CENTER or doctor/ physician.
Supplemental Hazard information (EU)
EUH014Reacts violently with water.
Other hazards - none

SECTION 3: Composition/information on ingredients
Substances
Formula: C10H8ClNO4S
Molecular Weight: 273,69 g/mol
CAS-No.: 4403-36-5
Hazardous ingredients according to Regulation (EC) No 1272/2008
ComponentClassificationConcentration
2-Phthalimidoethanesulfonyl chloride
CAS-No.4403-36-5Skin Corr. 1B; , H314,<= 100 %
EUH014
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a
physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Dry powder
Special hazards arising from the substance or mixture
no data available
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Do not flush with water. Keep
in suitable, closed containers for disposal.
Reference to other sections
For disposal see section 13.

SECTION 7: Handling and storage
Precautions for safe handling
Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Never allow product to get in contact with water during storage.
Recommended storage temperature: 2 - 8 °C
Handle and store under inert gas. Moisture sensitive.
Specific end use(s)
A part from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, Flame retardant protective clothing, The type of
protective equipment must be selected according to the concentration and amount of the
dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering
controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
respirators and components tested and approved under appropriate government standards such
as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) AppearanceForm: solid
Colour: white, off-white
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezingno data available
point
f) Initial boiling point and no data available
boiling range
g) Flash pointno data available
h) Evapouration rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative densityno data available
n) Water solubilityno data available
o) Partition coefficient: n- no data available
octanol/water
p) Auto-ignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
Reacts violently with water.
Conditions to avoid
Exposure to moisture.
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available
burning sensation, Cough, wheezing, laryngitis, Shortness of breath, spasm, inflammation and edema of
the larynx, spasm, inflammation and edema of the bronchi, pneumonitis, pulmonary edema, Material is
extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and skin.

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

SECTION 14: Transport information
UN number
ADR/RID: 3261IMDG: 3261IATA: 3261
UN proper shipping name
ADR/RID: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. (2-Phthalimidoethanesulfonyl chloride)
IMDG: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. (2-Phthalimidoethanesulfonyl chloride)
IATA:Corrosive solid, acidic, organic, n.o.s. (2-Phthalimidoethanesulfonyl chloride)
Transport hazard class(es)
ADR/RID: 8IMDG: 8IATA: 8
Packaging group
ADR/RID: IIIMDG: IIIATA: II
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
no data available

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
For this product a chemical safety assessment was not carried out

SECTION 16: Other information
Full text of H-Statements referred to under sections 2 and 3.
EUH014Reacts violently with water.
H314Causes severe skin burns and eye damage.
Skin Corr.Skin corrosion
Full text of R-phrases referred to under sections 2 and 3
R34 Causes burns.
Further information
Copyright 2013 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

 Safety Information

Symbol GHS05
GHS05
Signal Word Danger
Hazard Statements H314
Supplemental HS Reacts violently with water.
Precautionary Statements P280-P305 + P351 + P338-P310
Hazard Codes Xi,C
Risk Phrases R34
Safety Phrases S26-S36/37/39
RIDADR 3261
Packaging Group II
Hazard Class 8
HS Code 2925190090

 Synthetic Route

~33%

2-PHTHALIMIDOETHANESULFONYL CHLORIDE Structure

2-PHTHALIMIDOET...

CAS#:4403-36-5

Literature: Pfizer INC Patent: US6313312 B1, 2001 ;

~87%

2-PHTHALIMIDOETHANESULFONYL CHLORIDE Structure

2-PHTHALIMIDOET...

CAS#:4403-36-5

Literature: Shin, Kye Jung; Yoo, Kyung Ho; Kim, Dong Jin; Park, Sang Woo; Ko, Bong Suck; Lee, Sang Joo; Huh, Jae Doo; Park, Seung Yong Bioorganic and Medicinal Chemistry Letters, 1998 , vol. 8, # 13 p. 1607 - 1612

~86%

2-PHTHALIMIDOETHANESULFONYL CHLORIDE Structure

2-PHTHALIMIDOET...

CAS#:4403-36-5

Literature: Humljan, Jan; Gobec, Stanislav Tetrahedron Letters, 2005 , vol. 46, # 23 p. 4069 - 4072 Title/Abstract Full Text View citing articles Show Details Humljan, Jan; Kotnik, Miha; Boniface, Audrey; Solmajer, Tomaz; Urleb, Uros; Blanot, Didier; Gobec, Stanislav Tetrahedron, 2006 , vol. 62, # 47 p. 10980 - 10988

~%

2-PHTHALIMIDOETHANESULFONYL CHLORIDE Structure

2-PHTHALIMIDOET...

CAS#:4403-36-5

Literature: Yang, Zhanhui; Xu, Jiaxi Synthesis (Germany), 2013 , vol. 45, # 12 art. no. SS-2013-H0216-OP, p. 1675 - 1682

~%

2-PHTHALIMIDOETHANESULFONYL CHLORIDE Structure

2-PHTHALIMIDOET...

CAS#:4403-36-5

Literature: Yudakhina; Moreva; Zarubin; Purygin Russian Journal of Organic Chemistry, 2013 , vol. 49, # 6 p. 934 - 935 Zh. Org. Khim., 2013 , vol. 49, # 6 p. 947 - 948,2

 Customs

HS Code 2925190090
Summary 2925190090 other imides and their derivatives; salts thereof VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:6.5% General tariff:30.0%

 Synonyms

2-(Phthalimido)ethanesulfonyl chloride
MFCD01861217
2-Phthalimidoethanesulfonyl chloride
2-(1,3-dioxoisoindol-2-yl)ethanesulfonyl chloride
2-(1,3-Dioxoisoindolin-2-yl)ethanesulfonylchloride
Top Suppliers:I want be here



Get all suppliers and price by the below link:

2-PHTHALIMIDOETHANESULFONYL CHLORIDE suppliers

2-PHTHALIMIDOETHANESULFONYL CHLORIDE price