Cyclobutane-1,2,3,4-tetracarboxylic dianhydride structure
|
Common Name | Cyclobutane-1,2,3,4-tetracarboxylic dianhydride | ||
---|---|---|---|---|
CAS Number | 4415-87-6 | Molecular Weight | 196.114 | |
Density | 1.8±0.1 g/cm3 | Boiling Point | 545.3±50.0 °C at 760 mmHg | |
Molecular Formula | C8H4O6 | Melting Point | >300 °C(lit.) | |
MSDS | Chinese USA | Flash Point | 253.7±30.2 °C | |
Symbol |
GHS07 |
Signal Word | Warning |
Name | Cyclobutane-1,2,3,4-tetracarboxylic dianhydride |
---|---|
Synonym | More Synonyms |
Density | 1.8±0.1 g/cm3 |
---|---|
Boiling Point | 545.3±50.0 °C at 760 mmHg |
Melting Point | >300 °C(lit.) |
Molecular Formula | C8H4O6 |
Molecular Weight | 196.114 |
Flash Point | 253.7±30.2 °C |
Exact Mass | 196.000793 |
PSA | 86.74000 |
LogP | -1.89 |
Vapour Pressure | 0.0±1.5 mmHg at 25°C |
Index of Refraction | 1.599 |
Synonym:None known Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 36/37/38 Section 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological properties of this material have not been fully investigated. Potential Health Effects Eye: Causes eye irritation. May cause chemical conjunctivitis. Skin: Causes skin irritation. Ingestion: May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated. Inhalation: Causes respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Can produce delayed pulmonary edema. Chronic: Effects may be delayed. Section 4 - FIRST AID MEASURES Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Skin: Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Ingestion: Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth resuscitation. Notes to Physician: Treat symptomatically and supportively. Section 5 - FIRE FIGHTING MEASURES General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing Media: Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam. Section 6 - ACCIDENTAL RELEASE MEASURES General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions. Provide ventilation. Section 7 - HANDLING and STORAGE Handling: Wash thoroughly after handling. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Wash clothing before reuse. Storage: Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 4415-87-6: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use. Section 9 - PHYSICAL AND CHEMICAL PROPERTIES Physical State: Powder Color: white Odor: none reported pH: Not available. Vapor Pressure: Not available. Viscosity: Not available. Boiling Point: Not available. Freezing/Melting Point: > 300 deg C Autoignition Temperature: Not applicable. Flash Point: Not applicable. Explosion Limits, lower: Not available. Explosion Limits, upper: Not available. Decomposition Temperature: Solubility in water: Specific Gravity/Density: Molecular Formula: C8H4O6 Molecular Weight: 196.0244 Section 10 - STABILITY AND REACTIVITY Chemical Stability: Stable at room temperature in closed containers under normal storage and handling conditions. Conditions to Avoid: Incompatible materials, dust generation, excess heat. Incompatibilities with Other Materials: Oxidizing agents. Hazardous Decomposition Products: Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide. Hazardous Polymerization: Has not been reported Section 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 4415-87-6 unlisted. LD50/LC50: Not available. Carcinogenicity: 1,2,3,4-Cyclobutanetetracarboxylicdianhydride - Not listed by ACGIH, IARC, or NTP. Section 12 - ECOLOGICAL INFORMATION Section 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations. Section 14 - TRANSPORT INFORMATION IATA Not regulated as a hazardous material. IMO Not regulated as a hazardous material. RID/ADR Not regulated as a hazardous material. Section 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives Hazard Symbols: XI Risk Phrases: R 36/37/38 Irritating to eyes, respiratory system and skin. Safety Phrases: S 28A After contact with skin, wash immediately with plenty of water. S 37 Wear suitable gloves. S 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). WGK (Water Danger/Protection) CAS# 4415-87-6: No information available. Canada None of the chemicals in this product are listed on the DSL/NDSL list. CAS# 4415-87-6 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 4415-87-6 is not listed on the TSCA inventory. It is for research and development use only. SECTION 16 - ADDITIONAL INFORMATION N/A |
Symbol |
GHS07 |
---|---|
Signal Word | Warning |
Hazard Statements | H315-H319-H335 |
Precautionary Statements | P261-P305 + P351 + P338 |
Personal Protective Equipment | dust mask type N95 (US);Eyeshields;Gloves |
Hazard Codes | Xi |
Risk Phrases | R36/37/38 |
Safety Phrases | S26-S36 |
RIDADR | 1759 |
WGK Germany | 3 |
Packaging Group | III |
Hazard Class | 8 |
HS Code | 2932190090 |
~% Cyclobutane-1,2... CAS#:4415-87-6 |
Literature: Horie, Tomoaki; Sumino, Motoshige; Tanaka, Takumi; Matsushita, Yoshihisa; Ichimura, Teijiro; Yoshida, Jun-Ichi Organic Process Research and Development, 2010 , vol. 14, # 2 p. 405 - 410 |
~% Cyclobutane-1,2... CAS#:4415-87-6 |
Literature: ETERNAL CHEMICAL CO., LTD. Patent: US2006/89505 A1, 2006 ; Location in patent: Page/Page column 2 ; |
Precursor 2 | |
---|---|
DownStream 0 |
HS Code | 2932190090 |
---|---|
Summary | 2932190090 other compounds containing an unfused furan ring (whether or not hydrogenated) in the structure VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:6.5% General tariff:20.0% |
The synthesis and X-ray structure of 1, 2, 3, 4-cyclobutane tetracarboxylic dianhydride and the preparation of a new type of polyimide showing excellent transparency and heat resistance. Suzuki H, et al.
J. Polym. Sci. A 38(1) , 108-116, (2000)
|
|
Synthesis and characterization of novel polyimides with 1-octadecyl side chains for liquid crystal alignment layers. Lee YJ, et al.
Polym. Adv. Technol. 18(3) , 226-34, (2007)
|
Cyclobuta[1,2-c:3,4-c']difuran-1,3,4,6(3aH,3bH,6aH,6bH)-tetraone |
Tetrahydrocyclobuta[1,2-c:3,4-c']difuran-1,3,4,6-tetrone |
EINECS 224-577-5 |
Maleic anhydride cyclic dimer |
Tetrahydrofuro[3',4':3,4]cyclobuta[1,2-c]furan-1,3,4,6-tetrone |
Tetrahydrocyclobuta(1,2-c:3,4-c')difuran-1,3,4,6-tetraone |
Maleic anhydride cyclic dimer. |
1,2,3,4-Cyclobutanetetracarboxylic dianhydride |
Cyclobutanetetracarboxylic dianhydride |
Cyclobutane-1,2,3,4-Tetracarboxylicdianhydride |
1,2,3,4-cyclobutantetracarboxylic acid dianhydride |
Cyclobuta[1,2-c:3,4-c']difuran-1,3,4,6-tetrone, tetrahydro- |
MFCD00004944 |
1,2,3,4-cyclobutanetetracarboxylic acid dianhydride |
Cyclobutanetetracarboxylic acid dianhydride |
Cyclobutane-1,2,3,4-tetracarboxylic |