1-Methyl-3-(trifluoromethyl)-1H-pyrazole-4-sulfonyl chloride structure
|
Common Name | 1-Methyl-3-(trifluoromethyl)-1H-pyrazole-4-sulfonyl chloride | ||
---|---|---|---|---|
CAS Number | 519056-67-8 | Molecular Weight | 248.61100 | |
Density | 1.74g/cm3 | Boiling Point | 302.522ºC at 760 mmHg | |
Molecular Formula | C5H4ClF3N2O2S | Melting Point | 34ºC | |
MSDS | N/A | Flash Point | 136.761ºC |
Name | 1-Methyl-3-(trifluoromethyl)-1H-pyrazole-4-sulfonyl chloride |
---|---|
Synonym | More Synonyms |
Density | 1.74g/cm3 |
---|---|
Boiling Point | 302.522ºC at 760 mmHg |
Melting Point | 34ºC |
Molecular Formula | C5H4ClF3N2O2S |
Molecular Weight | 248.61100 |
Flash Point | 136.761ºC |
Exact Mass | 247.96300 |
PSA | 60.34000 |
LogP | 2.44720 |
Index of Refraction | 1.533 |
Synonym:None Known Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
Risk Phrases: 14 29 34 Section 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW
Reacts violently with water. Contact with water liberates toxic gas. Causes burns.Water-reactive. Potential Health Effects Eye: Causes eye burns. Skin: Causes skin burns. Ingestion: Causes gastrointestinal tract burns. Inhalation: Causes chemical burns to the respiratory tract. Chronic: Chronic exposure may cause effects similar to those of acute exposure. Section 4 - FIRST AID MEASURES Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical aid immediately. Skin: In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid immediately. Wash clothing before reuse. Ingestion: If swallowed, do NOT induce vomiting. Get medical aid immediately. If victim is fully conscious, give a cupful of water. Never give anything by mouth to an unconscious person. Inhalation: Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask. Notes to Physician: Treat symptomatically and supportively. Section 5 - FIRE FIGHTING MEASURES General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Water Reactive. Material will react with water and may release a flammable and/or toxic gas. Extinguishing Media: Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER! Contact professional fire-fighters immediately. Section 6 - ACCIDENTAL RELEASE MEASURES General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions. Provide ventilation. Do not expose spill to water. Section 7 - HANDLING and STORAGE Handling: Do not allow water to get into the container because of violent reaction. Minimize dust generation and accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Use only in a chemical fume hood. Discard contaminated shoes. Keep from contact with moist air and steam. Storage: Store in a cool, dry place. Store in a tightly closed container. Keep away from water. Corrosives area. Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION Engineering Controls: Use explosion-proof ventilation equipment. Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Exposure Limits CAS# 519056-67-8: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Section 9 - PHYSICAL AND CHEMICAL PROPERTIES Physical State: Solid Color: Not available. Odor: Not available. pH: Not available. Vapor Pressure: Not available. Viscosity: Not available. Boiling Point: 104 deg C @0.2mmHg Freezing/Melting Point: 34 - 36 deg C Autoignition Temperature: Not available. Flash Point: Not available. Explosion Limits, lower: Not available. Explosion Limits, upper: Not available. Decomposition Temperature: Solubility in water: Specific Gravity/Density: Molecular Formula: C5H4ClF3N2O2S Molecular Weight: 248.61 Section 10 - STABILITY AND REACTIVITY Chemical Stability: Reacts with water to form toxic fumes. Combines vigorously or explosively with water. Air sensitive. Moisture sensitive. Reacts with water to form hydrogen chloride, a toxic and corrosive gas. Conditions to Avoid: High temperatures, incompatible materials, dust generation, exposure to moist air or water. Incompatibilities with Other Materials: Oxidizing agents, bases, amines, water. Hazardous Decomposition Products: Hydrogen chloride, chlorine, carbon monoxide, oxides of nitrogen, oxides of sulfur, carbon dioxide, fluorine. Hazardous Polymerization: Has not been reported Section 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 519056-67-8 unlisted. LD50/LC50: Not available. Carcinogenicity: 1-Methyl-3-(trifluoromethyl)-1H-pyrazole-4-sulfonyl chloride - Not listed by ACGIH, IARC, or NTP. Section 12 - ECOLOGICAL INFORMATION Ecotoxicity: Fish: Pseudomonas putida: Section 13 - DISPOSAL CONSIDERATIONS Dispose of in a manner consistent with federal, state, and local regulations. Section 14 - TRANSPORT INFORMATION IATA Shipping Name: CORROSIVE SOLID, WATER-REACTIVE, N.O.S Hazard Class: 8 UN Number: 3096 Packing Group: II IMO Shipping Name: CORROSIVE SOLID, WATER-REACTIVE, N.O.S Hazard Class: 8 UN Number: 3096 Packing Group: II RID/ADR Shipping Name: CORROSIVE SOLID, WATER-REACTIVE, N.O.S Hazard Class: 8 UN Number: 3096 Packing group: II Section 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives Hazard Symbols: C Risk Phrases: R 14 Reacts violently with water. R 29 Contact with water liberates toxic gas. R 34 Causes burns. Safety Phrases: S 22 Do not breathe dust. S 23 Do not inhale gas/fumes/vapour/spray. S 24/25 Avoid contact with skin and eyes. S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S 36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). WGK (Water Danger/Protection) CAS# 519056-67-8: No information available. Canada None of the chemicals in this product are listed on the DSL/NDSL list. CAS# 519056-67-8 is not listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 519056-67-8 is not listed on the TSCA inventory. It is for research and development use only. SECTION 16 - ADDITIONAL INFORMATION N/A |
HS Code | 2933199090 |
---|
HS Code | 2933199090 |
---|---|
Summary | 2933199090. other compounds containing an unfused pyrazole ring (whether or not hydrogenated) in the structure. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0% |
1-methyl-3-(trifluoromethyl)pyrazole-4-sulfonyl chloride |