anilinium bromide

Modify Date: 2024-01-06 10:02:51

anilinium bromide Structure
anilinium bromide structure
Common Name anilinium bromide
CAS Number 542-11-0 Molecular Weight 174.03800
Density N/A Boiling Point 184.4ºC at 760 mmHg
Molecular Formula C6H8BrN Melting Point 285 °C(dec.)
MSDS N/A Flash Point 70ºC

 Names

Name aniline,hydrobromide
Synonym More Synonyms

 Chemical & Physical Properties

Boiling Point 184.4ºC at 760 mmHg
Melting Point 285 °C(dec.)
Molecular Formula C6H8BrN
Molecular Weight 174.03800
Flash Point 70ºC
Exact Mass 172.98400
PSA 26.02000
LogP 2.80810

 MSDS

Version 2.1
Regulation (EC) No 1907/2006

1 - Product and Company Information

Product NameANILINE HYDROBROMIDE - 50 MG

2 - Hazards Identification

SPECIAL INDICATION OF HAZARDS TO HUMANS AND THE ENVIRONMENT
Toxic by inhalation, in contact with skin and if swallowed.
Limited evidence of a carcinogenic effect. Risk of serious damage
to eyes. May cause sensitization by skin contact. Toxic: danger of
serious damage to health by prolonged exposure through inhalation,
in contact with skin and if swallowed. Possible risk of
irreversible effects. Very toxic to aquatic organisms.
Carc. Cat.3 Muta. Cat.3

3 - Composition/Information on Ingredients

Product NameCAS #EC noAnnex I
Index Number
ANILINE HYDROBROMIDE542-11-0 208-801-9 612-009-00-2
FormulaC6H7N
Molecular Weight 174,0400 AMU

4 - First Aid Measures

AFTER INHALATION
If inhaled, remove to fresh air. If not breathing give
artificial respiration. If breathing is difficult, give oxygen.
AFTER SKIN CONTACT
In case of skin contact, flush with copious amounts of water for
at least 15 minutes. Remove contaminated clothing and shoes.
Call a physician.
AFTER EYE CONTACT
In case of contact with eyes, flush with copious amounts of
water for at least 15 minutes. Assure adequate flushing by
separating the eyelids with fingers. Call a physician.
ALDRICHwww.molbase.com
AFTER INGESTION
If swallowed, wash out mouth with water provided person is
conscious. Call a physician immediately.

5 - Fire Fighting Measures

EXTINGUISHING MEDIA
Suitable: Water spray. Carbon dioxide, dry chemical powder, or
appropriate foam.
SPECIAL RISKS
Specific Hazard(s): Emits toxic fumes under fire conditions.
SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing
to prevent contact with skin and eyes.

6 - Accidental Release Measures

PERSONAL PRECAUTION PROCEDURES TO BE FOLLOWED IN CASE OF LEAK OR SPILL
Evacuate area.
PROCEDURE(S) OF PERSONAL PRECAUTION(S)
Wear self-contained breathing apparatus, rubber boots, and heavy
rubber gloves.
METHODS FOR CLEANING UP
Sweep up, place in a bag and hold for waste disposal. Avoid
raising dust. Ventilate area and wash spill site after material
pickup is complete.

7 - Handling and Storage

HANDLING
Directions for Safe Handling: Do not breathe dust. Do not get in
eyes, on skin, on clothing. Avoid prolonged or repeated exposure.
STORAGE
Conditions of Storage: Keep tightly closed.
SPECIAL REQUIREMENTS: Light sensitive.

8 - Exposure Controls / Personal Protection

ENGINEERING CONTROLS
Use only in a chemical fume hood. Safety shower and eye bath.
GENERAL HYGIENE MEASURES
Wash contaminated clothing before reuse. Wash thoroughly after
handling.
PERSONAL PROTECTIVE EQUIPMENT
Respiratory Protection: Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US)
or CEN (EU). Where risk assessment shows air-purifying respirators
are appropriate use a full-face particle respirator type N99 (US)
or type P2 (EN 143) respirator cartridges as a backup to
engineering controls. If the respirator is the sole means of
protection, use a full-face supplied air respirator.
Hand Protection: Compatible chemical-resistant gloves.
ALDRICHwww.molbase.com
Eye Protection: Chemical safety goggles.

9 - Physical and Chemical Properties

AppearancePhysical State: Solid
PropertyValueAt Temperature or Pressure
pH N/A
BP/BP RangeN/A
MP/MP RangeN/A
Flash PointN/A
FlammabilityN/A
Autoignition TempN/A
Oxidizing Properties N/A
Explosive Properties N/A
Explosion LimitsN/A
Vapor PressureN/A
Partition Coefficient N/A
ViscosityN/A
Vapor DensityN/A
Saturated Vapor Conc. N/A
Evaporation RateN/A
Bulk DensityN/A
Decomposition Temp.N/A
Solvent ContentN/A
Water ContentN/A
Surface TensionN/A
ConductivityN/A
Miscellaneous DataN/A
SolubilityN/A

10 - Stability and Reactivity

STABILITY
Stable: Stable.
Materials to Avoid: Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS
Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide,
Nitrogen oxides, Hydrogen bromide gas.
HAZARDOUS POLYMERIZATION
Hazardous Polymerization: Will not occur

11 - Toxicological Information

SENSITIZATION
Sensitization: Sensitizer.
Skin: May cause allergic skin reaction.
ROUTE OF EXPOSURE
Skin Contact: May cause skin irritation.
Skin Absorption: Toxic if absorbed through skin.
Eye Contact: Causes severe eye irritation.
Inhalation: Material may be irritating to mucous membranes and
upper respiratory tract. Toxic if inhaled.
Ingestion: Toxic if swallowed.
CHRONIC EXPOSURE - CARCINOGEN
ALDRICHwww.molbase.com
Result: This product is or contains a component that has been
reported to be possibly carcinogenic based on its IARC, ACGIH,
NTP, or EPA classification.
CHRONIC EXPOSURE - MUTAGEN
Result: May alter genetic material.

12 - Ecological Information

No data available.

13 - Disposal Considerations

SUBSTANCE DISPOSAL
Contact a licensed professional waste disposal service to dispose
of this material. Dissolve or mix the material with a combustible
solvent and burn in a chemical incinerator equipped with an
afterburner and scrubber. Observe all federal, state, and local
environmental regulations.

14 - Transport Information

RID/ADR
UN#: 2811
Class: 6.1
PG: III
Proper Shipping Name: Toxic solid, organic, n.o.s.
IMDG
UN#: 2811
Class: 6.1
PG: III
Proper Shipping Name: Toxic solid, organic, n.o.s.
Marine Pollutant: No
Severe Marine Pollutant: No
Technical Name: Required
IATA
UN#: 2811
Class: 6.1
PG: III
Proper Shipping Name: Toxic solid, organic, n.o.s.
Inhalation Packing Group I: No
Technical Name: Required

15 - Regulatory Information

CLASSIFICATION AND LABELING ACCORDING TO EU DIRECTIVES
ANNEX I INDEX NUMBER: 612-009-00-2
NOTA: A
INDICATION OF DANGER: T-N
Toxic. Dangerous for the environment.
R-PHRASES: 23/24/25-40-41-43-48/23/24/25-68-50
Toxic by inhalation, in contact with skin and if swallowed.
Limited evidence of a carcinogenic effect. Risk of serious
damage to eyes. May cause sensitization by skin contact. Toxic:
danger of serious damage to health by prolonged exposure
through inhalation, in contact with skin and if swallowed.
Possible risk of irreversible effects. Very toxic to aquatic
organisms.
ALDRICHwww.molbase.com
S-PHRASES: 26-27-36/37/39-45-61-63
In case of contact with eyes, rinse immediately with plenty of
water and seek medical advice. Take off immediately all
contaminated clothing. Wear suitable protective clothing,
gloves, and eye/face protection. In case of accident or if you
feel unwell, seek medical advice immediately (show the label
where possible). Avoid release to the environment. Refer to
special instructions/safety data sheets. In case of accident by
inhalation: remove casualty to fresh air and keep at rest.
COUNTRY SPECIFIC INFORMATION
Germany
WGK: 3
Self-Classification

16 - Other Information

WARRANTY
The above information is believed to be correct but does not
purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our
knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Inc.,
shall not be held liable for any damage resulting from handling or
from contact with the above product. See reverse side of invoice
or packing slip for additional terms and conditions of sale.
Copyright 2010 Co. License granted to make
unlimitedpaper copies for internal use only.
DISCLAIMER
For R&D use only. Not for drug, household or other uses.
ALDRICHwww.molbase.com


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

HS Code 2921419000

 Customs

HS Code 2921419000
Summary 2921419000 aniline and its salts。Supervision conditions:None。VAT:17.0%。Tax rebate rate:9.0%。MFN tariff:6.5%。General tariff:30.0%

 Synonyms

EINECS 208-801-9
AC1L29J1
AC1Q23L0
Benzenamine,hydrobromide
Anilin,Hydrobromid
CTK1G8496
phenylammonium bromide
Anilinium bromide
Benzenamine,hydrobromide (1:1)
Top Suppliers:I want be here


Get all suppliers and price by the below link:

anilinium bromide suppliers

anilinium bromide price