2,3-dibromobutyric acid

Modify Date: 2024-01-02 18:15:59

2,3-dibromobutyric acid Structure
2,3-dibromobutyric acid structure
Common Name 2,3-dibromobutyric acid
CAS Number 600-30-6 Molecular Weight 245.89700
Density 2.114g/cm3 Boiling Point 100-110°C 2mm
Molecular Formula C4H6Br2O2 Melting Point 86-90 °C
MSDS N/A Flash Point 100-110°C/2mm

 Names

Name 2,3-dibromobutanoic acid
Synonym More Synonyms

 Chemical & Physical Properties

Density 2.114g/cm3
Boiling Point 100-110°C 2mm
Melting Point 86-90 °C
Molecular Formula C4H6Br2O2
Molecular Weight 245.89700
Flash Point 100-110°C/2mm
Exact Mass 243.87300
PSA 37.30000
LogP 1.61790

 MSDS

Name: 2 3-Dibromobutyric Acid 98% Material Safety Data Sheet
Synonym: None known
CAS: 600-30-6
Section 1 - Chemical Product MSDS Name:2 3-Dibromobutyric Acid 98% Material Safety Data Sheet
Synonym:None known

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
600-30-6 2,3-Dibromobutyric Acid 98 209-992-1
Hazard Symbols: C
Risk Phrases: 34

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Causes burns.Corrosive.The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. The toxicological properties of this substance have not been fully investigated. May cause systemic effects.
Inhalation:
May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema. Causes chemical burns to the respiratory tract. The toxicological properties of this substance have not been fully investigated.
Aspiration may lead to pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.

Section 4 - FIRST AID MEASURES
Eyes: Get medical aid. Do NOT allow victim to rub eyes or keep eyes closed. Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated.
Non-combustible, substance itself does not burn but may decompose upon heating to produce irritating, corrosive and/or toxic fumes.
Extinguishing Media:
Do NOT get water inside containers. For small fires, use dry chemical, carbon dioxide, or water spray. For large fires, use dry chemical, carbon dioxide, alcohol-resistant foam, or water spray.
Cool containers with flooding quantities of water until well after fire is out.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Do not breathe dust, vapor, mist, or gas. Keep container tightly closed. Avoid ingestion and inhalation. Discard contaminated shoes.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 600-30-6: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: white
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 86.00 - 88.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C4H6Br2O2
Molecular Weight: 245.90

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 600-30-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2,3-Dibromobutyric Acid - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3261
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing group: III

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 600-30-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 600-30-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 600-30-6 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Hazard Codes C: Corrosive;
Risk Phrases R34
Safety Phrases S28A-S26
RIDADR 3261
Packaging Group II
Hazard Class 8
HS Code 2915900090

 Synthetic Route

~97%

2,3-dibromobutyric acid Structure

2,3-dibromobuty...

CAS#:600-30-6

Literature: Matveeva; Erin; Kurz Russian Journal of Organic Chemistry, 1997 , vol. 33, # 8 p. 1065 - 1067

~%

2,3-dibromobutyric acid Structure

2,3-dibromobuty...

CAS#:600-30-6

Literature: Synthesis, , p. 612 - 613

~%

2,3-dibromobutyric acid Structure

2,3-dibromobuty...

CAS#:600-30-6

Literature: Doklady Akademii Nauk SSSR, , vol. 14, p. 561 Chem. Zentralbl., , vol. 109, # I p. 1109

~%

2,3-dibromobutyric acid Structure

2,3-dibromobuty...

CAS#:600-30-6

Literature: Monatshefte fuer Chemie, , vol. 12, p. 416

 Customs

HS Code 2915900090
Summary 2915900090 other saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives VAT:17.0% Tax rebate rate:9.0% Supervision conditions:AB(certificate of inspection for goods inward,certificate of inspection for goods outward) MFN tariff:5.5% General tariff:30.0%

 Synonyms

2,3-Dibrom-buttersaeure
EINECS 209-992-1
2,3-Dibromobutyric acid
Butanoic acid,2,3-dibromo
MFCD00014334
Top Suppliers:I want be here



Get all suppliers and price by the below link:

2,3-dibromobutyric acid suppliers

2,3-dibromobutyric acid price