2,4-diaminoanisole dihydrochloride

Modify Date: 2024-01-06 20:57:31

2,4-diaminoanisole dihydrochloride Structure
2,4-diaminoanisole dihydrochloride structure
Common Name 2,4-diaminoanisole dihydrochloride
CAS Number 614-94-8 Molecular Weight 211.08900
Density N/A Boiling Point 135-140°C 22mm
Molecular Formula C7H12Cl2N2O Melting Point 30-32°C
MSDS N/A Flash Point 135-140°C/22mm

 Names

Name 4-methoxybenzene-1,3-diamine,dihydrochloride
Synonym More Synonyms

 Chemical & Physical Properties

Boiling Point 135-140°C 22mm
Melting Point 30-32°C
Molecular Formula C7H12Cl2N2O
Molecular Weight 211.08900
Flash Point 135-140°C/22mm
Exact Mass 210.03300
PSA 61.27000
LogP 3.62600

 MSDS

2,4-Diaminoanisole Dihydrochloride Revision number: 5
SAFETY DATA SHEET

Section1. IDENTIFICATION
Product name:2,4-Diaminoanisole Dihydrochloride

Revision number:5

Section2. HAZARDS IDENTIFICATION
GHS classification
PHYSICAL HAZARDSNot classified
HEALTH HAZARDS
Acute toxicity (Oral)Category 4
Category 4
Acute toxicity (Dermal)
Acute toxicity (Inhalation)Category 4
Not classified
ENVIRONMENTAL HAZARDS
GHS label elements, including precautionary statements
Pictograms or hazard symbols
Signal wordWarning
Hazard statementsHarmful if swallowed, in contact with skin or if inhaled
Precautionary statements:
Avoid breathing dust/fume/gas/mist/vapours/spray.
[Prevention]
Use only outdoors or in a well-ventilated area.
Do not eat, drink or smoke when using this product.
Wash hands thoroughly after handling.
Wear protective gloves and eye/face protection.
[Response]IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
breathing. Call a POISON CENTER or doctor/physician if you feel unwell.
IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
Rinse mouth.
IF ON SKIN: Gently wash with plenty of soap and water.
Wash contaminated clothing before reuse.
Call a POISON CENTER or doctor/physician if you feel unwell.
[Disposal]Dispose of contents/container through a waste management company authorized by
the local government.

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture:Substance
Components:2,4-Diaminoanisole Dihydrochloride
Percent:>99.0%(T)
614-94-8
CAS Number:
Synonyms:4-Methoxy-1,3-phenylenediamine Dihydrochloride
2,4-Diaminoanisole Dihydrochloride

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Formula:C7H10N2O·2HCl

Section4. FIRST AID MEASURES
Inhalation:Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Call a POISON CENTER or doctor/physician if you feel unwell.
Skin contact:Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
soap and water. If skin irritation or rash occurs: Get medical advice/attention.
Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. If eye irritation persists: Get medical
advice/attention.
Call a POISON CENTER or doctor/physician if you feel unwell. Rinse mouth.
Ingestion:
Protection of first-aiders:A rescuer should wear personal protective equipment, such as rubber gloves and air-
tight goggles.

Section5. FIRE-FIGHTING MEASURES
Dry chemical, foam, water spray, carbon dioxide.
Suitable extinguishing
media:
Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to
from the chemical:generate poisonous fume.
Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Remove movable
containers if safe to do so.
Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment.
equipment for firefighters:

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions,Use personal protective equipment. Keep people away from and upwind of spill/leak.
protective equipment and Entry to non-involved personnel should be controlled around the leakage area by
emergency procedures: roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it.
containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with
up: appropriate laws and regulations.

Section7. HANDLING AND STORAGE
Precautions for safe handling
Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment.
Prevent dispersion of dust. Wash hands and face thoroughly after handling.
Use a local exhaust if dust or aerosol will be generated.
Advice on safe handling: Avoid contact with skin, eyes and clothing.
Conditions for safe storage, including any
incompatibilities
Storage conditions:Keep container tightly closed. Store in a cool and dark place.
Store under inert gas.
Protect from moisture.
Store away from incompatible materials such as oxidizing agents.
Light-sensitive, Hygroscopic
Packaging material:Comply with laws.

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Install a closed system or local exhaust as possible so that workers should not be
Engineering controls:
exposed directly. Also install safety shower and eye bath.
Personal protective equipment
Respiratory protection: Dust respirator. Follow local and national regulations.
Hand protection:Protective gloves.
2,4-Diaminoanisole Dihydrochloride

Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Eye protection:Safety glasses. A face-shield, if the situation requires.
Skin and body protection: Protective clothing. Protective boots, if the situation requires.

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state (20°C):Solid
Form:Crystal- Powder
White - Pale yellow red
Colour:
Odour:No data available
pH: No data available
Melting point/freezing point:No data available
Boiling point/range:No data available
Flash point:No data available
Flammability or explosive
limits:
Lower:No data available
Upper:No data available
Relative density:No data available
Solubility(ies):
[Water]Soluble
[Other solvents]No data available

Section10. STABILITY AND REACTIVITY
Chemical stability:Stable under proper conditions.
Possibility of hazardous No special reactivity has been reported.
reactions:
Incompatible materials: Oxidizing agents
Hazardous decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx), Hydrogen chloride
products:

Section11. TOXICOLOGICAL INFORMATION
Acute Toxicity:No data available
Skin corrosion/irritation: No data available
Serious eyeNo data available
damage/irritation:
Germ cell mutagenicity: mmo-sat 10 ug/plate (-S9)
dnd-mus-orl 200 mg/kg
Carcinogenicity:
IARC =No data available
NTP =No data available
Reproductive toxicity:No data available
RTECS Number:ST2693000

Section12. ECOLOGICAL INFORMATION
Ecotoxicity:
No data available
Fish:
Crustacea:No data available
No data available
Algae:
Persistence / degradability: No data available
No data available
Bioaccumulative
potential(BCF):
Mobility in soil
Log Pow:No data available
No data available
Soil adsorption (Koc):
Henry's LawNo data available
constant(PaM3/mol):
2,4-Diaminoanisole Dihydrochloride

Section13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system.
Observe all federal, state and local regulations when disposing of the substance.

Section14. TRANSPORT INFORMATION
Hazards Class:Does not correspond to the classification standard of the United Nations
UN-No:Not listed

Section15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
loading and unloading were prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Toxicological Information

CHEMICAL IDENTIFICATION

RTECS NUMBER :
ST2693000
CHEMICAL NAME :
m-Phenylenediamine, 4-methoxy-, dihydrochloride
CAS REGISTRY NUMBER :
614-94-8
LAST UPDATED :
199710
DATA ITEMS CITED :
5
MOLECULAR FORMULA :
C7-H10-N2-O.2Cl-H
MOLECULAR WEIGHT :
211.11

HEALTH HAZARD DATA

ACUTE TOXICITY DATA

MUTATION DATA

TYPE OF TEST :
Body fluid assay
TEST SYSTEM :
Rodent - rat Bacteria - Salmonella typhimurium
DOSE/DURATION :
100 mg/kg
REFERENCE :
MUREAV Mutation Research. (Elsevier Science Pub. B.V., POB 211, 1000 AE Amsterdam, Netherlands) V.1- 1964- Volume(issue)/page/year: 79,289,1980

 Safety Information

Risk Phrases 36/37/38
Safety Phrases S26-S36/37/39
RTECS ST2693000
HS Code 2922299090

 Customs

HS Code 2922299090
Summary 2922299090. other amino-naphthols and other amino-phenols, other than those containing more than one kind of oxygen function, their ethers and esters; salts thereof. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0%

 Synonyms

2,3-DIPHENYL-1,2,3,4-TETRAHYDRO-QUINOXALINE-5-CARBOXYLIC ACID
1,3-Benzenediamine,4-methoxy-,dihydrochloride
m-Phenylenediamine,4-methoxy-,dihydrochloride
4-METHOXY-1,3-BENZENEDIAMINE DIHYDROCHLORIDE
2,4-Diaminoanisole dihydrochloride
MFCD00054337
Top Suppliers:I want be here


Get all suppliers and price by the below link:

2,4-diaminoanisole dihydrochloride suppliers

2,4-diaminoanisole dihydrochloride price