3'-Aminoacetanilide hydrochloride

Modify Date: 2024-01-06 23:38:52

3'-Aminoacetanilide hydrochloride Structure
3'-Aminoacetanilide hydrochloride structure
Common Name 3'-Aminoacetanilide hydrochloride
CAS Number 621-35-2 Molecular Weight 186.63900
Density N/A Boiling Point 189ºC
Molecular Formula C8H11ClN2O Melting Point 247 °C
MSDS N/A Flash Point 189ºC

 Names

Name 3-Aminoacetanilide Hydrochloride
Synonym More Synonyms

 Chemical & Physical Properties

Boiling Point 189ºC
Melting Point 247 °C
Molecular Formula C8H11ClN2O
Molecular Weight 186.63900
Flash Point 189ºC
Exact Mass 186.05600
PSA 55.12000
LogP 2.68340
Storage condition 0-6°C

 MSDS

Name: 3 -Aminoacetanilide Hydrochloride (Pract) Material Safety Data Sheet
Synonym: Acetamide; N-(3-Aminophenyl)-; Monohydrochloride
CAS: 621-35-2
Section 1 - Chemical Product MSDS Name:3 -Aminoacetanilide Hydrochloride (Pract) Material Safety Data Sheet
Synonym:Acetamide; N-(3-Aminophenyl)-; Monohydrochloride

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
621-35-2 Acetamide, N-(3-Aminophenyl)-, Monohyd ca 100 210-682-3
Hazard Symbols: XN
Risk Phrases: 20/21/22

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Store in a cool, dry, well-ventilated area away from incompatible substances. Keep refrigerated. (Store below 4C/39F.)

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 621-35-2: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: almost white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 247 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: >270 deg C
Solubility in water: soluble
Specific Gravity/Density:
Molecular Formula: C8H11ClN2O
Molecular Weight: 186.64

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of nitrogen, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 621-35-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Acetamide, N-(3-Aminophenyl)-, Monohydrochloride - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 39 Wear eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 621-35-2: 1
Canada
CAS# 621-35-2 is listed on Canada's NDSL List.
CAS# 621-35-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 621-35-2 is listed on the TSCA inventory.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Hazard Codes Xi
Risk Phrases R36/37/38
Safety Phrases S37/39-S26
HS Code 2924299090

 Synthetic Route

~%

3'-Aminoacetanilide hydrochloride Structure

3'-Aminoacetani...

CAS#:621-35-2

Literature: Journal fuer Praktische Chemie (Leipzig), , vol. 328, # 4 p. 497 - 514

 Customs

HS Code 2924299090
Summary 2924299090. other cyclic amides (including cyclic carbamates) and their derivatives; salts thereof. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0%

 Synonyms

MFCD00043828
3'-aminoacetanilide hydrochloride
EINECS 210-682-3
Top Suppliers:I want be here


Get all suppliers and price by the below link:

3'-Aminoacetanilide hydrochloride suppliers

3'-Aminoacetanilide hydrochloride price