Benzene, 1-(ethylthio)-4-methyl-

Modify Date: 2024-01-09 07:03:40

Benzene, 1-(ethylthio)-4-methyl- Structure
Benzene, 1-(ethylthio)-4-methyl- structure
Common Name Benzene, 1-(ethylthio)-4-methyl-
CAS Number 622-63-9 Molecular Weight 152.25700
Density 0.99g/cm3 Boiling Point 220.6ºC at 760 mmHg
Molecular Formula C9H12S Melting Point N/A
MSDS N/A Flash Point 86ºC

 Names

Name 1-ethylsulfanyl-4-methylbenzene
Synonym More Synonyms

 Chemical & Physical Properties

Density 0.99g/cm3
Boiling Point 220.6ºC at 760 mmHg
Molecular Formula C9H12S
Molecular Weight 152.25700
Flash Point 86ºC
Exact Mass 152.06600
PSA 25.30000
LogP 3.10700
Index of Refraction 1.549

 MSDS

Version 1.0
Regulation (EC) No 1907/2006

1 - Product and Company Information

Product NameETHYL P-TOLYL SULFIDE - 50 MG

2 - Hazards Identification

SPECIAL INDICATION OF HAZARDS TO HUMANS AND THE ENVIRONMENT
Not hazardous according to Directive 67/548/EEC.

3 - Composition/Information on Ingredients

Product NameCAS #EC noAnnex I
Index Number
ETHYL P-TOLYL SULFIDE622-63-9 NoneNone
FormulaC9H12S
Molecular Weight 152,2600 AMU

4 - First Aid Measures

AFTER INHALATION
If inhaled, remove to fresh air. If not breathing give
artificial respiration. If breathing is difficult, give oxygen.
AFTER SKIN CONTACT
In case of contact, immediately wash skin with soap and copious
amounts of water.
AFTER EYE CONTACT
In case of contact, immediately flush eyes with copious amounts
of water for at least 15 minutes.
AFTER INGESTION
If swallowed, wash out mouth with water provided person is
conscious. Call a physician.

5 - Fire Fighting Measures

EXTINGUISHING MEDIA
Suitable: For small (incipient) fires, use media such as
ALDRICHwww.molbase.com
"alcohol" foam, dry chemical, or carbon dioxide. For large
fires, apply water from as far as possible. Use very large
quantities (flooding) of water applied as a mist or spray; solid
streams of water may be ineffective. Cool all affected
containers with flooding quantities of water.
SPECIAL RISKS
Specific Hazard(s): Combustible liquid. Emits toxic fumes under
fire conditions.
SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing
to prevent contact with skin and eyes.

6 - Accidental Release Measures

PERSONAL PRECAUTION PROCEDURES TO BE FOLLOWED IN CASE OF LEAK OR SPILL
Evacuate area.
PROCEDURE(S) OF PERSONAL PRECAUTION(S)
Wear respirator, chemical safety goggles, rubber boots, and
heavy rubber gloves.
METHODS FOR CLEANING UP
Cover with dry-lime, sand, or soda ash. Place in covered
containers using non-sparking tools and transport outdoors.
Ventilate area and wash spill site after material pickup is
complete.

7 - Handling and Storage

HANDLING
Directions for Safe Handling: Avoid breathing vapor. Avoid
contact with eyes, skin, and clothing. Avoid prolonged or
repeated exposure.
STORAGE
Conditions of Storage: Keep tightly closed. Keep away from heat
and open flame.
SPECIAL REQUIREMENTS: Stench.

8 - Exposure Controls / Personal Protection

ENGINEERING CONTROLS
Safety shower and eye bath. Mechanical exhaust required.
GENERAL HYGIENE MEASURES
Wash contaminated clothing before reuse. Wash thoroughly after
handling.
PERSONAL PROTECTIVE EQUIPMENT
Respiratory Protection: Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US)
or CEN (EU). Where risk assessment shows air-purifying respirators
are appropriate use a full-face respirator with multi-purpose
combination (US) or type ABEK (EN 14387) respirator cartridges as
a backup to engineering controls. If the respirator is the sole
means of protection, use a full-face supplied air respirator.
Hand Protection: Compatible chemical-resistant gloves.
ALDRICHwww.molbase.com
Eye Protection: Chemical safety goggles.

9 - Physical and Chemical Properties

AppearancePhysical State: Liquid
Odor: Stench.
PropertyValueAt Temperature or Pressure
pHN/A
BP/BP RangeN/A
MP/MP RangeN/A
Flash Point76,700. - 87,800 °C.
FlammabilityN/A
Autoignition TempN/A
Oxidizing Properties N/A
Explosive Properties N/A
Explosion LimitsN/A
Vapor PressureN/A
Partition Coefficient Log Kow: 3,748
ViscosityN/A
Vapor DensityN/A
Saturated Vapor Conc. N/A
Evaporation RateN/A
Bulk DensityN/A
Decomposition Temp.N/A
Solvent ContentN/A
Water ContentN/A
Surface TensionN/A
ConductivityN/A
Miscellaneous DataN/A
SolubilityN/A

10 - Stability and Reactivity

STABILITY
Stable: Stable.
Materials to Avoid: Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS
Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide,
Sulfur oxides.
HAZARDOUS POLYMERIZATION
Hazardous Polymerization: Will not occur

11 - Toxicological Information

SIGNS AND SYMPTOMS OF EXPOSURE
To the best of our knowledge, the chemical, physical, and
toxicological properties have not been thoroughly investigated.
ROUTE OF EXPOSURE
Skin Contact: May cause skin irritation.
Skin Absorption: May be harmful if absorbed through the skin.
Eye Contact: May cause eye irritation.
Inhalation: May be harmful if inhaled. Material may be
irritating to mucous membranes and upper respiratory tract.
Ingestion: May be harmful if swallowed.
ALDRICHwww.molbase.com

12 - Ecological Information

No data available.

13 - Disposal Considerations

SUBSTANCE DISPOSAL
Contact a licensed professional waste disposal service to dispose
of this material. This combustible material may be burned in a
chemical incinerator equipped with an afterburner and scrubber.
Observe all federal, state, and local environmental regulations.

14 - Transport Information

RID/ADR
Non-hazardous for road transport.
IMDG
Non-hazardous for sea transport.
IATA
UN#: 3334
Class: 9
Proper Shipping Name: Aviation Regulated Liquid, N.O.S.
Inhalation Packing Group I: No
Technical Name: Required

15 - Regulatory Information

Not hazardous according to Directive 67/548/EEC.
Caution: Substance not yet fully tested (EU).

16 - Other Information

WARRANTY
The above information is believed to be correct but does not
purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our
knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Inc.,
shall not be held liable for any damage resulting from handling or
from contact with the above product. See reverse side of invoice
or packing slip for additional terms and conditions of sale.
Copyright 2010 Co. License granted to make
unlimitedpaper copies for internal use only.
DISCLAIMER
For R&D use only. Not for drug, household or other uses.
ALDRICHwww.molbase.com


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

HS Code 2930909090

 Synthetic Route

 Customs

HS Code 2930909090
Summary 2930909090. other organo-sulphur compounds. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0%

 Synonyms

1-(Ethylsulfanyl)-4-methylbenzene
Benzene,1-(ethylthio)-4-methyl
p-Cresyl ethyl sulfide
Sulfide,ethyl p-tolyl
ethyl-4-tolylsulfide
Ethyl p-tolyl sulfide
1-(ethylthio)-4-methylbenzene
ethyl 4-methylphenyl sulfide
4-methylphenyl ethyl sulfide
Ethyl p-cresyl sulfide
(4-tolyl)ethyl sulfide
4-(Ethylthio)toluene
Top Suppliers:I want be here



Get all suppliers and price by the below link:

Benzene, 1-(ethylthio)-4-methyl- suppliers

Benzene, 1-(ethylthio)-4-methyl- price