bis(trichloromethyl)mercury

Modify Date: 2024-09-20 19:49:48

bis(trichloromethyl)mercury Structure
bis(trichloromethyl)mercury structure
Common Name bis(trichloromethyl)mercury
CAS Number 6795-81-9 Molecular Weight 437.32900
Density N/A Boiling Point N/A
Molecular Formula C2Cl6Hg Melting Point N/A
MSDS N/A Flash Point N/A

 Names

Name bis(trichloromethyl)mercury
Synonym More Synonyms

 Chemical & Physical Properties

Molecular Formula C2Cl6Hg
Molecular Weight 437.32900
Exact Mass 435.78400
LogP 4.56410

 MSDS

Version 1.0
Regulation (EC) No 1907/2006

1 - Product and Company Information

Product NameBIS(TRICHLOROMETHYL)MERCURY (I - 250 MG
I)

2 - Hazards Identification

SPECIAL INDICATION OF HAZARDS TO HUMANS AND THE ENVIRONMENT
Very toxic by inhalation, in contact with skin and if swallowed.
Danger of cumulative effects. Very toxic to aquatic organisms, may
cause long-term adverse effects in the aquatic environment.

3 - Composition/Information on Ingredients

Product NameCAS #EC noAnnex I
Index Number
BIS(TRICHLOROMETHYL)MERCURY (II) 6795-81-9 229-867-5 None
FormulaC2Cl6Hg
Molecular Weight 437,3300 AMU

4 - First Aid Measures

AFTER INHALATION
If inhaled, remove to fresh air. If not breathing give
artificial respiration. If breathing is difficult, give oxygen.
AFTER SKIN CONTACT
In case of skin contact, flush with copious amounts of water for
at least 15 minutes. Remove contaminated clothing and shoes.
Call a physician.
AFTER EYE CONTACT
In case of contact with eyes, flush with copious amounts of
water for at least 15 minutes. Assure adequate flushing by
separating the eyelids with fingers. Call a physician.
AFTER INGESTION
If swallowed, wash out mouth with water provided person is
conscious. Call a physician immediately.
ALDRICHwww.molbase.com

5 - Fire Fighting Measures

EXTINGUISHING MEDIA
Suitable: Water spray. Carbon dioxide, dry chemical powder, or
appropriate foam.
SPECIAL RISKS
Specific Hazard(s): Emits toxic fumes under fire conditions.
SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing
to prevent contact with skin and eyes.

6 - Accidental Release Measures

PERSONAL PRECAUTION PROCEDURES TO BE FOLLOWED IN CASE OF LEAK OR SPILL
Evacuate area.
PROCEDURE(S) OF PERSONAL PRECAUTION(S)
Wear self-contained breathing apparatus, rubber boots, and heavy
rubber gloves.
METHODS FOR CLEANING UP
Cover with dry-lime, sand, or soda ash. Place in covered
containers using non-sparking tools and transport outdoors.
Ventilate area and wash spill site after material pickup is
complete.

7 - Handling and Storage

HANDLING
Directions for Safe Handling: Do not get in eyes, on skin, on
clothing. Do not breathe vapor. Avoid prolonged or repeated
exposure.
STORAGE
Conditions of Storage: Keep tightly closed.

8 - Exposure Controls / Personal Protection

ENGINEERING CONTROLS
Safety shower and eye bath. Use only in a chemical fume hood.
GENERAL HYGIENE MEASURES
Wash contaminated clothing before reuse. Wash thoroughly after
handling.
PERSONAL PROTECTIVE EQUIPMENT
Respiratory Protection: Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US)
or CEN (EU). Where risk assessment shows air-purifying respirators
are appropriate use a full-face respirator with multi-purpose
combination (US) or type ABEK (EN 14387) respirator cartridges as
a backup to engineering controls. If the respirator is the sole
means of protection, use a full-face supplied air respirator.
Hand Protection: Compatible chemical-resistant gloves.
Eye Protection: Chemical safety goggles.

9 - Physical and Chemical Properties
ALDRICHwww.molbase.com

pH N/A
BP/BP RangeN/A
MP/MP RangeN/A
Flash PointN/A
FlammabilityN/A
Autoignition TempN/A
Oxidizing Properties N/A
Explosive Properties N/A
Explosion LimitsN/A
Vapor PressureN/A
Partition Coefficient N/A
ViscosityN/A
Vapor DensityN/A
Saturated Vapor Conc. N/A
Evaporation RateN/A
Bulk DensityN/A
Decomposition Temp.N/A
Solvent ContentN/A
Water ContentN/A
Surface TensionN/A
ConductivityN/A
Miscellaneous DataN/A
SolubilityN/A

10 - Stability and Reactivity

STABILITY
Stable: Stable.
Materials to Avoid: Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS
Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide,
Hydrogen chloride gas Mercury/mercury oxides.
HAZARDOUS POLYMERIZATION
Hazardous Polymerization: Will not occur

11 - Toxicological Information

SIGNS AND SYMPTOMS OF EXPOSURE
To the best of our knowledge, the chemical, physical, and
toxicological properties have not been thoroughly investigated.
In contrast to inorganic mercury compounds, alkyl mercury
compounds rapidly pass through the placenta and blood brain
barrier. The peripheral and central nervous systems and the
kidney are major target organs. Methylmercury poisoning symptoms
result primarily from damage to the nervous system. The symptoms
are primarily characterized by loss of sensation in the hands
and feet and in areas around the mouth, diminution of vision
resulting in tunnel vision, ataxia, dysarthria, and hearing
loss. Severe poisoning produces blindness, coma and death. There
is a latent period of weeks to months before development of the
poisoning symptoms. Mercury shows a specificity to damage small
nerve cells in the cerebellum and visual cortex. Methylmercury
causes degeneration and necrosis of neurons in the focal areas
of the cerebral cortex, especially within the visual areas of
the occipital cortex and the granular layer of the cerebellum.
It has been found that methylmercury inhibits protein synthesis
in the brain before symptoms of poisoning appear and that
ALDRICHwww.molbase.com
recovery of protein synthesis does not occur in granular cells
as it does recover in other neuronal cell types. Consumption by
pregnant women has caused serious neurological disorders in
their offspring resulting in mental retardation with cerebral
palsy. Acute exposure to nonlethal levels of methylmercyry
results in
ROUTE OF EXPOSURE
Skin Contact: Causes skin irritation.
Skin Absorption: Readily absorbed through skin. May be fatal if
absorbed through skin.
Eye Contact: Causes eye irritation.
Inhalation: Material is irritating to mucous membranes and upper
respiratory tract. May be fatal if inhaled.
Ingestion: May be fatal if swallowed.
TARGET ORGAN INFORMATION
Kidneys. Nerves.
CONDITIONS AGGRAVATED BY EXPOSURE
May cause nervous system disturbances.

12 - Ecological Information

No data available.

13 - Disposal Considerations

SUBSTANCE DISPOSAL
Contact a licensed professional waste disposal service to dispose
of this material. Dissolve or mix the material with a combustible
solvent and burn in a chemical incinerator equipped with an
afterburner and scrubber. Observe all federal, state, and local
environmental regulations.

14 - Transport Information

RID/ADR
UN#: 2024
Class: 6.1
PG: I
Proper Shipping Name: Mercury compound, liquid, n.o.s.
IMDG
UN#: 2024
Class: 6.1
PG: I
Proper Shipping Name: Mercury compound, liquid, n.o.s.
Marine Pollutant: No
Severe Marine Pollutant: Yes
Technical Name: Required
IATA
UN#: 2024
Class: 6.1
PG: I
Proper Shipping Name: Mercury compound, liquid, n.o.s.
Inhalation Packing Group I: No
Technical Name: Required

ALDRICHwww.molbase.com
15 - Regulatory Information

CLASSIFICATION AND LABELING ACCORDING TO EU DIRECTIVES
INDICATION OF DANGER: T+-N
Very toxic. Dangerous for the environment.
R-PHRASES: 26/27/28-33-50/53
Very toxic by inhalation, in contact with skin and if
swallowed. Danger of cumulative effects. Very toxic to aquatic
organisms, may cause long-term adverse effects in the aquatic
environment.
S-PHRASES: 13-28-36-45-60-61
Keep away from food, drink, and animal feedingstuffs. After
contact with skin, wash immediately with plenty of soap-suds.
Wear suitable protective clothing. In case of accident or if
you feel unwell, seek medical advice immediately (show the
label where possible). This material and its container must be
disposed of as hazardous waste. Avoid release to the
environment. Refer to special instructions/safety data sheets.

16 - Other Information

WARRANTY
The above information is believed to be correct but does not
purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our
knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Inc.,
shall not be held liable for any damage resulting from handling or
from contact with the above product. See reverse side of invoice
or packing slip for additional terms and conditions of sale.
Copyright 2010 Co. License granted to make
unlimitedpaper copies for internal use only.
DISCLAIMER
For R&D use only. Not for drug, household or other uses.
ALDRICHwww.molbase.com


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

HS Code 2931900090

 Precursor & DownStream

Precursor  0

DownStream  1

 Customs

HS Code 2931900090
Summary 2931900090. other organo-inorganic compounds. VAT:17.0%. Tax rebate rate:13.0%. Supervision conditions:AB(certificate of inspection for goods inward,certificate of inspection for goods outward). MFN tariff:6.5%. General tariff:30.0%

 Synonyms

Bis(trichlormethyl)-Quecksilber
bis-trichloromethyl-mercury
Mercury,bis(trichloromethyl)
EINECS 229-867-5
Bis-<trichlor-methyl>-quecksilber (II)
Bis-<trichlormetyl>-quecksilber(II)