diisoamyl thiomalate

Modify Date: 2024-02-09 11:39:29

diisoamyl thiomalate Structure
diisoamyl thiomalate structure
Common Name diisoamyl thiomalate
CAS Number 68084-03-7 Molecular Weight 290.41900
Density 1.01 Boiling Point 140-150ºC
Molecular Formula C14H26O4S Melting Point N/A
MSDS N/A Flash Point 228.6ºC

 Names

Name di-isoamylthiomalate
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.01
Boiling Point 140-150ºC
Molecular Formula C14H26O4S
Molecular Weight 290.41900
Flash Point 228.6ºC
Exact Mass 290.15500
PSA 91.40000
LogP 2.85350
Index of Refraction 1.455-1.457

 MSDS

Name: Di-isoamylthiomalate 94% Material Safety Data Sheet
Synonym: Mercaptobutanedioic acid bis(3-methylbutyl)ester; Bis(3-methylbutyl) mercaptosuccinate; Butanedioic acid, mercapto-, bis(3-methylbutyl) ester; Diisoamyl thiomalat
CAS: 68084-03-7
Section 1 - Chemical Product MSDS Name:Di-isoamylthiomalate 94% Material Safety Data Sheet
Synonym:Mercaptobutanedioic acid bis(3-methylbutyl)ester; Bis(3-methylbutyl) mercaptosuccinate; Butanedioic acid, mercapto-, bis(3-methylbutyl) ester; Diisoamyl thiomalat

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
68084-03-7 Di-isoamylthiomalate 94 268-416-7
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill using an absorbent, non-combustible material such as earth, sand, or vermiculite. Do not use combustible materials such as sawdust. Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 68084-03-7: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Clear liquid
Color: clear very slight yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 140.0 - 150.0 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: > 100 deg C (> 212.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: insoluble
Specific Gravity/Density: 1.0100g/cm3
Molecular Formula: C14H26O4S
Molecular Weight: 290.41

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 68084-03-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Di-isoamylthiomalate - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 68084-03-7: No information available.
Canada
CAS# 68084-03-7 is listed on Canada's NDSL List.
CAS# 68084-03-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 68084-03-7 is listed on the TSCA inventory.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Safety Phrases S24/25

 Synonyms

diisopentylthiomalate
EINECS 268-416-7