2-bromo-1-(5-bromo-2,3-dihydro-1-benzofuran-7-yl)ethanone

Modify Date: 2024-01-12 12:10:17

2-bromo-1-(5-bromo-2,3-dihydro-1-benzofuran-7-yl)ethanone Structure
2-bromo-1-(5-bromo-2,3-dihydro-1-benzofuran-7-yl)ethanone structure
Common Name 2-bromo-1-(5-bromo-2,3-dihydro-1-benzofuran-7-yl)ethanone
CAS Number 690632-70-3 Molecular Weight 319.97700
Density 1.877g/cm3 Boiling Point 403.4ºC at 760 mmHg
Molecular Formula C10H8Br2O2 Melting Point N/A
MSDS N/A Flash Point N/A

 Names

Name 2-bromo-1-(5-bromo-2,3-dihydro-1-benzofuran-7-yl)ethanone

 Chemical & Physical Properties

Density 1.877g/cm3
Boiling Point 403.4ºC at 760 mmHg
Molecular Formula C10H8Br2O2
Molecular Weight 319.97700
Exact Mass 317.88900
PSA 26.30000
LogP 2.96160
Index of Refraction 1.632

 MSDS

Name: 2-Bromo-1-(5-bromo-2 3-dihydro-1-benzofuran-7-yl)ethanone Material Safety Data Sheet
Synonym: 2-bromo-1-(5-bromo-2,3-dihydrobenzo [b] furan-7-yl)ethan-1-one
CAS: 690632-70-3
Section 1 - Chemical Product MSDS Name:2-Bromo-1-(5-bromo-2 3-dihydro-1-benzofuran-7-yl)ethanone Material Safety Data Sheet
Synonym:2-bromo-1-(5-bromo-2,3-dihydrobenzo [b] furan-7-yl)ethan-1-one

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
690632-70-3 2-Bromo-1-(5-bromo-2,3-dihydro-1-benzo 97+ unlisted
Hazard Symbols: C
Risk Phrases: 34

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Causes burns.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Chronic exposure may cause effects similar to those of acute exposure.

Section 4 - FIRST AID MEASURES
Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give anything by mouth to an unconscious person.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions. Provide ventilation. Vacuum or sweep up material and place into a suitable, dry disposal container.

Section 7 - HANDLING and STORAGE
Handling:
Minimize dust generation and accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing.
Keep container tightly closed. Do not ingest or inhale. Discard contaminated shoes. Use only with adequate ventilation.
Storage:
Keep container closed when not in use. Store under an inert atmosphere. Store in a cool, dry area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 690632-70-3: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: orange
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 132-134 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C10H8Br2O2
Molecular Weight: 320.00

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
Dust generation.
Incompatibilities with Other Materials:
Oxidizing agents, bases, amines.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, carbon dioxide, hydrogen bromide, bromine.
Hazardous Polymerization: Will not occur.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 690632-70-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Bromo-1-(5-bromo-2,3-dihydro-1-benzofuran-7-yl)ethanone - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION
Ecotoxicity:
Fish: Pseudomonas putida:

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing group: III

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 22 Do not breathe dust.
S 24/25 Avoid contact with skin and eyes.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 690632-70-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 690632-70-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 690632-70-3 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A