Aluminum magnesium isopropoxide

Synonym:Aluminum magnesium isopropoxide

---

Section 2: Composition and Information on Ingredients
IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL)
Title Compound69207-83-6100%10mg/m3 (as Al2O3)no data

---

Section 3: Hazards Identification
The dust may moderately irritate the skin, eyes, and respiratory system. Moisture will produce isopropanol
Emergency Overview:
vapor which may cause drowsiness.
Primary Routes of Exposure:Inhalation, ingestion, contact with skin and eyes.
Eye Contact:May cause moderate irritation of the eyes.
Skin Contact:Dehydrating agent. Liquid may cause mild irritation of the skin.
Isopropanol vapor may be irritating to the nose and respiratory tract and cause headache, dizziness, and
Inhalation:
drowsiness.
Ingestion:Ingestion may cause gastrointestinal distress, dizziness, weakness, and drowsiness.
The dust may moderately irritate the skin, eyes, and respiratory system. Moisture will produce isopropanol
Acute Health Affects:
vapor which may cause drowsiness.
In animal studies isopropanol has acted as a mutagen, tumorigen and reproductive effector. Prolonged
Chronic Health Affects:
exposure can damage nerves, kidneys, and the cardiovascular system.
NTP:No
IARC:No
OSHA:No

---

SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with soap and water. Remove contaminated clothes if necessary. Seek medical
Skin Exposure:
assistance if irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
Inhalation:
in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Ingestion:Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious).

---

SECTION 5: Fire Fighting Measures
Flash Point:not applicable
Autoignition Temperature:no data
Explosion Limits:no data
Extinguishing Medium:carbon dioxide, dry powder or foam
If involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure self-contained
Special Fire Fighting Procedures:
breathing apparatus and full protective clothing.
Hazardous Combustion andIf involved in a fire this material may emit toxic organic fumes and alumina and magnesia dust.
Decomposion Products:
Unusual Fire or Explosion Hazards: Highly flammable material. Dust may form explosive mixtures with air.

---

SECTION 6: Accidental Release Measures
Eliminate all ignition sources. Avoid contact with water. Small spills may be adsorbed into diatomaceous earth,
Spill and Leak Procedures:
sand, or other suitable adsorbent, and swept up.

---

SECTION 7: Handling and Storage
Store in a tightly sealed container in a cool dry place. If container is left open, product may adsorb moisture
Handling and Storage:
and carbon dioxide from the atmosphere and release isopropanol vapor.

---

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:Wear protective clothing and gloves.
Ventilation:Material may form a vapor upon exposure to air. if possible, handle the material in an efficient fume hood.
If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator
Respirator:
Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation:Material may form a vapor upon exposure to air. if possible, handle the material in an efficient fume hood.
Additional Protection:No additional protection required.

---

SECTION 9: Physical and Chemical Properties
Color and Form:white xtl
Molecular Weight:550.97
Melting Point:40°
Boiling Point:110°C/5 mm
Vapor Pressure:no data
Specific Gravity:no data
Odor:alcohol-like odor
Solubility in Water:Reacts with water

---

SECTION 10: Stability and Reactivity
Stability:moisture sensitive
Hazardous Polymerization:no hazardous polymerization
Conditions to Avoid:Keep away from moisture, heat and ignition sources including open flame and electrostatic discharge.
Incompatibility:Water, oxidizing agents, and halogens
Decomposition Products:Carbon dioxide, carbon monoxide, organic vapors, soot, and metal oxides and carbonates.

---

SECTION 11: Toxicological Information
RTECS Data:No information available in the RTECS files.
Carcinogenic Effects:No data available
Mutagenic Effects:No data available
Tetratogenic Effects:No data available

---

SECTION 12: Ecological Information
Ecological Information:No information available

---

SECTION 13: Disposal Considerations
Disposal:Dispose of according to local, state and federal regulations.

---

SECTION 14: Transportation
Shipping Name (CFR):Flammable solids, Organic, N.O.S.
Hazard Class (CFR):4.1
Additional Hazard Class (CFR):NA
Packaging Group (CFR):II
UN ID Number (CFR):UN# 1325
Shipping Name (IATA):Flammable solid, Organic, N.O.S.
Hazard Class (IATA):4.1
Additional Hazard Class (IATA):NA
Packaging Group (IATA):II
UN ID Number (IATA):UN# 1325

---

SECTION 15: Regulatory Information
TSCA:Not listed in the TSCA inventory.
SARA (Title 313):Not reportable under SARA section 313.
Second Ingredient:none

---

SECTION 16 - ADDITIONAL INFORMATION
N/A