1-Ethynyl-3-methoxybenzene

Modify Date: 2024-01-07 19:53:15

1-Ethynyl-3-methoxybenzene Structure
1-Ethynyl-3-methoxybenzene structure
Common Name 1-Ethynyl-3-methoxybenzene
CAS Number 768-70-7 Molecular Weight 132.159
Density 1.0±0.1 g/cm3 Boiling Point 204.4±23.0 °C at 760 mmHg
Molecular Formula C9H8O Melting Point N/A
MSDS N/A Flash Point 69.6±18.3 °C

 Names

Name 3-Ethynylanisole
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.0±0.1 g/cm3
Boiling Point 204.4±23.0 °C at 760 mmHg
Molecular Formula C9H8O
Molecular Weight 132.159
Flash Point 69.6±18.3 °C
Exact Mass 132.057510
PSA 9.23000
LogP 2.32
Vapour Pressure 0.4±0.4 mmHg at 25°C
Index of Refraction 1.530

 MSDS


Section1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product name: 3-Ethynylanisole

Section2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Not a dangerous substance according to GHS.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Label elements
This substance is not classified as dangerous according to Directive 67/548/EEC.
Other hazards
Stench.

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Synonyms: 1-Ethynyl-3-methoxybenzene
Formula: C9H8O
Molecular Weight: 132,16 g/mol
CAS-No.EC-No.Index-No.ClassificationConcentration
1-Ethynyl-3-methoxybenzene
768-70-7----

Section4. FIRST AID MEASURES
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water.
Consult a physician.

Section5. FIRE-FIGHTING MEASURES
Suitable extinguishing media
For small (incipient) fires, use media such as "alcohol" foam, dry chemical, or carbon dioxide. For large fires,
apply water from as far as possible. Use very large quantities (flooding) of water applied as a mist or spray;
solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water.
Special protective equipment for fire-fighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
Use water spray to cool unopened containers.

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions
Avoid breathing vapors, mist or gas. Remove all sources of ignition. Beware of vapours accumulating to form
explosive concentrations. Vapours can accumulate in low areas.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place
in container for disposal according to local regulations (see section 13). Keep in suitable, closed containers
for disposal.

Section7. HANDLING AND STORAGE
Precautions for safe handling
Avoid inhalation of vapour or mist.
Keep away from sources of ignition - No smoking. Take measures to prevent the build up of electrostatic
charge.
Conditions for safe storage
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully
resealed and kept upright to prevent leakage. Store in cool place.
Stench.

Section8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Personal protective equipment
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with
multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to
engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Hand protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without
touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves
after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the
standard EN 374 derived from it.
Eye protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and
approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin and body protection
impervious clothing, The type of protective equipment must be selected according to the concentration
and amount of the dangerous substance at the specific workplace.
Hygiene measures
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at
the end of workday.

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Formliquid
Colourcolourless
OdourStench.
Safety data
pH no data available
Melting pointno data available
Boiling point204 - 210 °C - lit.
Flash point76,67 °C - closed cup
Ignition temperature no data available
Lower explosion limit no data available
Upper explosion limit no data available
Density1,04 g/cm3 at 25 °C
Water solubilityno data available

Section10. STABILITY AND REACTIVITY
Chemical stability
Stable under recommended storage conditions.
Conditions to avoid
Heat, flames and sparks.
Materials to avoid
Strong oxidizing agentsStrong oxidizing agents, acids, Halogens, Alkali metals
Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Carbon oxides

Section11. TOXICOLOGICAL INFORMATION
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
InhalationMay be harmful if inhaled. May cause respiratory tract irritation.
IngestionMay be harmful if swallowed.
SkinMay be harmful if absorbed through skin. May cause skin irritation.
EyesMay cause eye irritation.
Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly
investigated.
Additional Information
RTECS: Not available

Section12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
PBT and vPvB assessment
no data available
Other adverse effects
no data available

Section13. DISPOSAL CONSIDERATIONS
Product
This combustible material may be burned in a chemical incinerator equipped with an afterburner and
scrubber. Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
professional waste disposal service to dispose of this material.
Contaminated packaging
Dispose of as unused product.

Section14. TRANSPORT INFORMATION
ADR/RID
Not dangerous goods
IMDG
Not dangerous goods
IATA
UN-Number: 3334 Class: 9
Proper shipping name: Aviation regulated liquid, n.o.s. (1-Ethynyl-3-methoxybenzene)

Section15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.

Section16. OTHER INFORMATION
Further information
Copyright 2010 Co. License granted to make unlimited paper copies for internal use only.
The above information is believed to be correct but does not purport to be all inclusive and shall be used
only as a guide. The information in this document is based on the present state of our knowledge and is
applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee
of the properties of the product. Co., shall not be held liable for any damage resulting from
handling or from contact with the above product. See reverse side of invoice or packing slip for additional
terms and conditions of sale.

 Safety Information

Hazard Codes T+
WGK Germany 3.0
HS Code 2909309090

 Synthetic Route

 Customs

HS Code 2909309090
Summary 2909309090 other aromatic ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:5.5% General tariff:30.0%

 Synonyms

1-Ethynyl-3-methoxybenzene
MFCD00160810
3-Ethynylphenyl methyl ether
Benzene, 1-ethynyl-3-methoxy-
Top Suppliers:I want be here



Get all suppliers and price by the below link:

1-Ethynyl-3-methoxybenzene suppliers

1-Ethynyl-3-methoxybenzene price