2-ISOPROPOXYETHANAMINE structure
|
Common Name | 2-ISOPROPOXYETHANAMINE | ||
---|---|---|---|---|
CAS Number | 81731-43-3 | Molecular Weight | 103.16300 | |
Density | 0.84 g/cm3 | Boiling Point | 120ºC | |
Molecular Formula | C5H13NO | Melting Point | N/A | |
MSDS | N/A | Flash Point | 26.9ºC |
Name | 2-Isopropoxyethylamine |
---|---|
Synonym | More Synonyms |
Density | 0.84 g/cm3 |
---|---|
Boiling Point | 120ºC |
Molecular Formula | C5H13NO |
Molecular Weight | 103.16300 |
Flash Point | 26.9ºC |
Exact Mass | 103.10000 |
PSA | 35.25000 |
LogP | 1.07040 |
Index of Refraction | 1.415 |
2-Aminoethyl Isopropyl Ether
SAFETY DATA SHEET Section1. IDENTIFICATION OF THE SUBSTANCE OR MIXTURE AND OF THE SUPPLIER Product name:2-Aminoethyl Isopropyl Ether Section2. HAZARDS IDENTIFICATION Classification of the GHS
PHYSICAL HAZARDS
Flammable liquidsCategory 3 HEALTH HAZARDS Skin corrosion/irritationCategory 1C Category 1 Serious eye damage/eye irritation ENVIRONMENTAL HAZARDSNot classified GHS label elements Pictograms or hazard symbols Signal wordDanger Hazard statementFlammable liquid and vapour Causes severe skin burns and eye damage Precautionary statements Keep away from heat/sparks/open flames/hot surfaces. - No smoking. [Prevention] Keep container tightly closed. Use explosion-proof electrical/ventilating/lighting equipment. Take precautionary measures against ignition by the static discharge and the spark. Do not breathe. Wash hands thoroughly after handling. Wear protective gloves/eye protection/face protection. [Response]IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse. Immediately call a POISON CENTER or doctor/physician. [Storage]Store in a well-ventilated place. Keep cool. Store locked up. [Disposal]Dispose of contents/container through a waste management company authorized by the local government 2-Aminoethyl Isopropyl Ether Section3. COMPOSITION/INFORMATION ON INGREDIENTS Substance/mixture:Substance Component(s):2-Aminoethyl Isopropyl Ether Percent:>98.0%(GC)(T) CAS Number:81731-43-3 Synonyms:2-Isopropoxyethylamine Chemical Formula:C5H13NO Section4. FIRST AID MEASURES Remove victim to fresh air and keep at rest in a position comfortable for breathing. Inhalation: Immediately call a POISON CENTER or doctor/physician. Skin contact:Remove/Take off immediately all contaminated clothing. Gently wash with plenty of soap and water. Immediately call a POISON CENTER or doctor/physician. Eye contact:Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.Immediately call a POISON CENTER or doctor/physician. Ingestion:Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Do NOT induce vomiting. A rescuer should wear personal protective equipment, such as rubber gloves and air- Protection of first-aiders: tight goggles. Section5. FIRE-FIGHTING MEASURES Suitable extinguishingDry chemical, foam, carbon dioxide. media: Extinguishing media not to Water (It may scatter and spread fire.) be used: Specific hazards:Take care as it may decompose upon combustion or in high temperatures to generate poisonous fume. Specific methods:Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place. In case of fire in the surroundings: Keep containers cool by spraying with water. Eliminate all ignition sources if safe to do so. Special protectiveWhen extinguishing fire, be sure to wear personal protective equipment. equipment for firefighters: Section6. ACCIDENTAL RELEASE MEASURES Personal precautions,Use extra personal protective equipment (self-contained breathing apparatus). Keep protective equipment and people away from and upwind of spill/leak. Ensure adequate ventilation. Entry to non- emergency procedures: involved personnel should be controlled around the leakage area by roping off, etc. Environmental precautions: Prevent product from entering drains. Methods and materials for Absorb spilled material in dry sand or inert absorbent before recovering it into an containment and cleaning airtight container. In case of large amount of spillage, contain a spill by bunding. up: Adhered or collected material should be promptly disposed of, in accordance with appropriate laws and regulations. Prevention of secondary Remove all sources of ignition. Fire-extinguishing devices should be prepared in hazards:case of a fire. Use spark-proof tools and explosion-proof equipment. Section7. HANDLING AND STORAGE Handling Technical measures:Handling is performed in a well ventilated place. Wear suitable protective equipment. Prevent generation of vapor or mist. Keep away from heat/sparks/open flame/hot surfaces. -No smoking. Take measures to prevent the build up of electrostatic charge. Use explosion-proof equipment. Wash hands and face thoroughly after handling. Use a closed system if possible. Use a ventilation, local exhaust if vapor or aerosol will be generated. Avoid contact with skin, eyes and clothing. Advice on safe handling: 2-Aminoethyl Isopropyl Ether Section7. HANDLING AND STORAGE Storage Keep container tightly closed. Store in a cool, dark and well-ventilated place. Storage conditions: Store under inert gas. Store locked up. Store away from incompatible materials such as oxidizing agents. Law is followed. Packaging material: Section8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering controls:Install a closed system or local exhaust. Also install safety shower and eye bath. Personal protective equipment Respiratory protection: Half or full facepiece respirator, self-contained breathing apparatus(SCBA), supplied air respirator, etc. Use respirators approved under appropriate government standards and follow local and national regulations. Hand protection:Impervious gloves. Eye protection:Safety goggles. A face-shield, if the situation requires. Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires. Section9. PHYSICAL AND CHEMICAL PROPERTIES Liquid Physical state (20°C): Form:clear Color:Colorless - Very pale yellow Odor:No data available pH: No data available Melting point/freezing point:No data available Boiling Point/Range:120 °C Flash Point:No data available Explosive limits Lower:No data available Upper:No data available Density:0.84 Solubility:No data available Section10. STABILITY AND REACTIVITY Stable under proper conditions. Stability: Reactivity:No special reactivity has been reported. Air-sensitive Conditions to avoid: Incompartible materials: oxidizing agents, acids Hazardous Decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx) Products: Section11. TOXICOLOGICAL INFORMATION Acute Toxicity:No data available Skin corrosion/irritation: No data available Serious eyeNo data available damage/irritation: Germ cell mutagenicity: No data available Carcinogenicity: IARC =No data available NTP =No data available Reproductive toxicity:No data available Section12. ECOLOGICAL INFORMATION Ecotoxicity: Fish:No data available No data available Crustacea: Algae:No data available 2-Aminoethyl Isopropyl Ether Section12. ECOLOGICAL INFORMATION Persistence / degradability: No data available BioaccumulativeNo data available potential(BCF): Mobillity in soil log Pow:No data available No data available Soil adsorption (Koc): Henry's LawNo data available constant(PaM3/mol): Section13. DISPOSAL CONSIDERATIONS Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when disposing of the substance. Section14. TRANSPORT INFORMATION Hazards Class:3: Flammable liquid. 8: Corrosive. Subsidiary risk: UN-No:2733 Amines, flammable, corrosive, n.o.s. Proper shipping name: Packing group:III Section15. REGULATORY INFORMATION Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were prescribed. SECTION 16 - ADDITIONAL INFORMATION N/A |
Hazard Codes | Xi |
---|---|
Risk Phrases | 11-34 |
Safety Phrases | S16-S26-S36-S37-S39 |
RIDADR | UN 2733 |
HS Code | 2922199090 |
~% 2-ISOPROPOXYETH... CAS#:81731-43-3 |
Literature: Journal of the Chemical Society, , p. 313 Journal of the Chemical Society, , p. 5041 |
~% 2-ISOPROPOXYETH... CAS#:81731-43-3 |
Literature: Chemische Berichte, , vol. 97, p. 510 - 519 |
Precursor 3 | |
---|---|
DownStream 0 |
HS Code | 2922199090 |
---|---|
Summary | 2922199090. other amino-alcohols, other than those containing more than one kind of oxygen function, their ethers and esters; salts thereof. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0% |
2-propan-2-yloxyethanamine |