YTTERBIUM HEXAFLUOROPENTANEDIONATE

Modify Date: 2024-01-14 19:01:00

YTTERBIUM HEXAFLUOROPENTANEDIONATE Structure
YTTERBIUM HEXAFLUOROPENTANEDIONATE structure
Common Name YTTERBIUM HEXAFLUOROPENTANEDIONATE
CAS Number 81849-60-7 Molecular Weight 623.18600
Density N/A Boiling Point N/A
Molecular Formula C10H6F12O6Yb Melting Point N/A
MSDS N/A Flash Point N/A

 Names

Name (Z)-1,1,1,5,5,5-hexafluoro-4-hydroxypent-3-en-2-one,ytterbium,dihydrate
Synonym More Synonyms

 Chemical & Physical Properties

Molecular Formula C10H6F12O6Yb
Molecular Weight 623.18600
Exact Mass 623.93600
PSA 71.06000
LogP 3.96120

 MSDS


Section 1: Product Identification
Chemical Name:Ytterbium (III) hexafluoroacetylacetonate dihydrate (99.9%-Yb) (REO)
CAS Registry Number:81849-60-7
Formula:Yb(CF3COCHCOCF3)3.2H2O
EINECS Number:none
Chemical Family:metal fluorobeta-diketonate complexes
Synonym:none

Section 2: Composition and Information on Ingredients
IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL)
Title Compound81849-60-7100%2.5mg/m3 (as F)2.5mg/m3 (as F)

Section 3: Hazards Identification
Emergency Overview:Irritating to skin, eyes and respiratory tract.
Primary Routes of Exposure:Ingestion
Eye Contact:Causes slight to mild irritation of the eyes.
Skin Contact:Causes slight to mild irritation of the skin.
Inhalation:Irritating to the respiratory tract, skin and eyes.
Ingestion:No information on the physiological effects of ingestion.
Acute Health Affects:Irritating to skin, eyes and respiratory tract.
Product contains fluorine which under certain conditions of use, decomposition, or metabolism, may generate
Chronic Health Affects:fluoride ion, causing, nausea, vomiting, labored breathing, hypocalcaemia, deterioration of bone and tooth
structure, kidney and liver damage.
NTP:No
IARC:No
OSHA:No

SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
Skin Exposure:
irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in
Inhalation:
breathing, coughing, wheezing or pain. In such cases seek immediate medical assistance.
Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
Ingestion:
vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
Flash Point:not applicable
Autoignition Temperature:none
Explosion Limits:none
Extinguishing Medium:carbon dioxide, dry powder or foam.
If this product is involved in a fire, firefighters should be equipped with NIOSH approved positive pressure
Special Fire Fighting Procedures:
self-contained breathing apparatus and full protective clothing.
Hazardous Combustion andIf involved in a fire this material may emit toxic and corrosive fumes of hydrogen fluoride
Decomposion Products:
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazard.

SECTION 6: Accidental Release Measures
Spill and Leak Procedures:Small spills can be mixed with vermiculite or sodium carbonate and swept up.

SECTION 7: Handling and Storage
Handling and Storage:Store the material in a sealed container. Keep away from heat and moisture.

SECTION 8: Exposure Controls and Personal Protection
Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:Wear appropriate chemical resistant gloves and protective clothing.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
If ventilation is not available a respirator should be worn. The use of respirators requires a Respiratory
Respirator:
Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
Additional Protection:No additional protection required.

SECTION 9: Physical and Chemical Properties
Color and Form:white to off-white solid
Molecular Weight:794.19(830.22)
Melting Point:no data
Boiling Point:no data
Vapor Pressure:no data
Specific Gravity:no data
Odor:none
Solubility in Water:insoluble

SECTION 10: Stability and Reactivity
Stability:air and moisture stable solid
Hazardous Polymerization:No hazardous polymerization
Conditions to Avoid:none
Incompatibility:oxidizing agents
Decomposition Products:carbon monoxide, cerium oxide, hydrogen fluoride, carbonyl fluoride, and organic fumes

SECTION 11: Toxicological Information
RTECS Data:No information available in the RTECS files.
Carcinogenic Effects:no data
Mutagenic Effects:no data
Tetratogenic Effects:no data

SECTION 12: Ecological Information
Ecological Information:No information available

SECTION 13: Disposal Considerations
Disposal:Dispose of according to local, state and federal regulations.

SECTION 14: Transportation
Shipping Name (CFR):Non-hazardous
Hazard Class (CFR):NA
Additional Hazard Class (CFR):NA
Packaging Group (CFR):NA
UN ID Number (CFR):NA
Shipping Name (IATA):Non-hazardous
Hazard Class (IATA):NA
Additional Hazard Class (IATA):NA
Packaging Group (IATA):NA
UN ID Number (IATA):NA

SECTION 15: Regulatory Information
TSCA:Not listed in the TSCA inventory.
SARA (Title 313):Title compound not listed.
Second Ingredient:none


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Safety Information

Risk Phrases 20/21/22-36/37/38
Safety Phrases 26-36/37/39

 Synonyms

YTTERBIUM HEXAFLUOROACETYLACETONATE DIHYDRATE
Ytterbium(III) hexafluoroacetylacetonate dihydrate,Yb(CF3COCHCOCF3)3.2H2O
YTTERBIUM(III) HEXAFLUOROACETYLACETONATE DIHYDRATE
Top Suppliers:I want be here


Get all suppliers and price by the below link:

YTTERBIUM HEXAFLUOROPENTANEDIONATE suppliers

YTTERBIUM HEXAFLUOROPENTANEDIONATE price