(4-Nitrophenyl)(phenyl)sulfane

Modify Date: 2024-01-04 12:34:47

(4-Nitrophenyl)(phenyl)sulfane Structure
(4-Nitrophenyl)(phenyl)sulfane structure
Common Name (4-Nitrophenyl)(phenyl)sulfane
CAS Number 952-97-6 Molecular Weight 231.27000
Density 1.31g/cm3 Boiling Point 396.8ºC at 760mmHg
Molecular Formula C12H9NO2S Melting Point 52-55 °C(lit.)
MSDS Chinese USA Flash Point 193.8ºC
Symbol GHS07
GHS07
Signal Word Warning

 Names

Name 4-nitrophenyl phenyl sulfide
Synonym More Synonyms

 Chemical & Physical Properties

Density 1.31g/cm3
Boiling Point 396.8ºC at 760mmHg
Melting Point 52-55 °C(lit.)
Molecular Formula C12H9NO2S
Molecular Weight 231.27000
Flash Point 193.8ºC
Exact Mass 231.03500
PSA 71.12000
LogP 4.26920
Index of Refraction 1.665

 MSDS

Name: p-Nitrophenyl phenyl sulfide 98% Material Safety Data Sheet
Synonym:
CAS: 952-97-6
Section 1 - Chemical Product MSDS Name:p-Nitrophenyl phenyl sulfide 98% Material Safety Data Sheet
Synonym:

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
952-97-6 4-Nitrophenyl phenyl sulfide 98 213-462-5
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
Dust may cause mechanical irritation. The toxicological properties of this material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this material have not been fully investigated.
Ingestion:
May cause digestive tract disturbances. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Avoid generating dusty conditions. Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 952-97-6: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Crystalline powder
Color: yellow to green
Odor: None reported.
pH: Not available.
Vapor Pressure: 2 mmHg @ 182 C
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 56.00 - 58.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C12H9NO2S
Molecular Weight: 231.27

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, carbon dioxide, nitrogen, hydrogen sulfide.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 952-97-6: WQ5620000 LD50/LC50:
Not available.
Carcinogenicity:
4-Nitrophenyl phenyl sulfide - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 952-97-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 952-97-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 952-97-6 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A

 Toxicological Information

CHEMICAL IDENTIFICATION

RTECS NUMBER :
WQ5620000
CHEMICAL NAME :
Sulfide, p-nitrophenyl phenyl
CAS REGISTRY NUMBER :
952-97-6
BEILSTEIN REFERENCE NO. :
1912782
LAST UPDATED :
199612
DATA ITEMS CITED :
1
MOLECULAR FORMULA :
C12-H9-N-O2-S
MOLECULAR WEIGHT :
231.28
WISWESSER LINE NOTATION :
WNR DSR

HEALTH HAZARD DATA

ACUTE TOXICITY DATA

MUTATION DATA

TYPE OF TEST :
Mutation in microorganisms
TEST SYSTEM :
Bacteria - Salmonella typhimurium
DOSE/DURATION :
50 ug/plate
REFERENCE :
MUREAV Mutation Research. (Elsevier Science Pub. B.V., POB 211, 1000 AE Amsterdam, Netherlands) V.1- 1964- Volume(issue)/page/year: 67,123,1979

 Safety Information

Symbol GHS07
GHS07
Signal Word Warning
Hazard Statements H315-H319-H335
Precautionary Statements P261-P305 + P351 + P338
Personal Protective Equipment dust mask type N95 (US);Eyeshields;Gloves
Hazard Codes Xi: Irritant;
Risk Phrases R36/37/38
Safety Phrases S26-S36
RIDADR NONH for all modes of transport
WGK Germany 3
RTECS WQ5620000
HS Code 2930909090

 Synthetic Route

 Customs

HS Code 2930909090
Summary 2930909090. other organo-sulphur compounds. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0%

 Articles2

More Articles
Simple and efficient recyclable catalytic system for performing copper-catalysed S-arylation reactions in the presence of water.

Chemistry 13(18) , 5100-5, (2007)

A novel protocol for the copper-catalysed S-arylation of thiophenol derivatives with aryl halides leading to diaryl sulfides is reported. The reactions were catalysed by a combination of a copper salt...

Mutagenicity of 4-nitrodiphenyl thioether-derived products and their potential metabolites.

Mutat. Res. 263(1) , 13-9, (1991)

4-Nitrodiphenyl thioether (4-NO2TE) and its various potential metabolites 4-nitroso- (4-NOTE), 4-hydroxylamino- (4-NHOHTE), 4-hydroxyacetylamino- [4-N(OH)ACTE], 4-acetoxy-acetylamino- [4-N(OAc)-ACTE],...

 Synonyms

EINECS 213-462-5
1-nitro-4-phenylsulfanylbenzene
MFCD00024700