Salvianolic acid A

Modify Date: 2024-01-02 09:46:53

Salvianolic acid A Structure
Salvianolic acid A structure
Common Name Salvianolic acid A
CAS Number 96574-01-5 Molecular Weight 494.447
Density 1.6±0.1 g/cm3 Boiling Point 858.7±65.0 °C at 760 mmHg
Molecular Formula C26H22O10 Melting Point 164-167ºC
MSDS Chinese USA Flash Point 292.9±27.8 °C

 Use of Salvianolic acid A


Salvianolic acid A could protect the blood brain barrier through matrix metallopeptidase 9 (MMP-9) inhibition and anti-inflammation.

 Names

Name Salvianolic Acid A
Synonym More Synonyms

 Salvianolic acid A Biological Activity

Description Salvianolic acid A could protect the blood brain barrier through matrix metallopeptidase 9 (MMP-9) inhibition and anti-inflammation.
Related Catalog
Target

MMP-9

In Vivo A significant beneficial effect of Salvianolic acid A (SAA) is observed in the Salvianolic acid A treatment groups. Salvianolic acid A (20 mg/kg) could significantly prolonged the retention time of rats on the plate. While compared with sham operation group, the brain water content in model group significantly increases, which is attenuated significantly by Salvianolic acid A (10 and 20 mg/kg). Compared with the model group, Salvianolic acid A (5, 10, and 20 mg/kg) could maintain the normal structures of neurons and increase neurons number. It is also found that Salvianolic acid A (20 mg/kg) could significantly reduce I/R induced MMP-9 upregulation. While the MMP-2 expression is not significantly affected by Salvianolic acid A. Tissue inhibitors of metalloproteinases (TIMPs) could inhibit the activity of MMPs through high affinity binding to MMPs catalytic domain[1].
References

[1]. Zhang W, et al. Salvianolic acid A attenuates ischemia reperfusion induced rat brain damage by protecting the blood brain barrier through MMP-9 inhibition and anti-inflammation. Chin J Nat Med. 2018 Mar;16(3):184-193.

 Chemical & Physical Properties

Density 1.6±0.1 g/cm3
Boiling Point 858.7±65.0 °C at 760 mmHg
Melting Point 164-167ºC
Molecular Formula C26H22O10
Molecular Weight 494.447
Flash Point 292.9±27.8 °C
Exact Mass 494.121307
PSA 184.98000
LogP 4.23
Vapour Pressure 0.0±0.3 mmHg at 25°C
Index of Refraction 1.790
Storage condition Hygroscopic, -20°C Freezer, Under Inert Atmosphere
Water Solubility H2O: ≥19mg/mL

 MSDS


Section1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product identifiers
Product name: Salvianolic acid A hydrate
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances



Section2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Label elements
The product does not need to be labelled in accordance with EC directives or respective national laws.
Other hazards - none

Section3. COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Synonyms: Dan phenolic acid A hydrate
Formula: C26H22O10 · xH2O
Molecular Weight: 494,45 g/mol

Section4. FIRST AID MEASURES
Description of first aid measures
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
In case of skin contact
Wash off with soap and plenty of water.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Indication of any immediate medical attention and special treatment needed
no data available

Section5. FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

Section6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing vapors, mist or gas.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Sweep up and shovel. Keep in suitable, closed containers for disposal.
Reference to other sections
For disposal see section 13.

Section7. HANDLING AND STORAGE
Precautions for safe handling
Provide appropriate exhaust ventilation at places where dust is formed.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Recommended storage temperature: -20 °C
Specific end uses
no data available

Section8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
General industrial hygiene practice.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired,
use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Section9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a) AppearanceForm: solid
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezingno data available
point
f) Initial boiling point and no data available
boiling range
g) Flash pointno data available
h) Evaporation rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative densityno data available
n) Water solubilityno data available
o) Partition coefficient: n- no data available
octanol/water
p) Autoignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

Section10. STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available

Section11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
May be harmful if inhaled. May cause respiratory tract irritation.
IngestionMay be harmful if swallowed.
SkinMay be harmful if absorbed through skin. May cause skin irritation.
EyesMay cause eye irritation.
Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Additional Information
RTECS: Not available

Section12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available

Section13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.

Section14. TRANSPORT INFORMATION
UN number
ADR/RID: -IMDG: -IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA:Not dangerous goods
Transport hazard class(es)
ADR/RID: -IMDG: -IATA: -
Packaging group
ADR/RID: -IMDG: -IATA: -
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
no data available

Section15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available

Section16. OTHER INFORMATION
Further information
Copyright 2012 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

 Safety Information

Safety Phrases 24/25
RIDADR NONH for all modes of transport

 Articles32

More Articles
Surfactant-coated graphitized multiwalled carbon nanotubes as the pseudostationary phase in electrokinetic chromatography for the analysis of phytochemical compounds in biological fluids.

Electrophoresis 36(7-8) , 1055-63, (2015)

This report describes the use of surfactant-coated graphitized multiwalled carbon nanotubes (SC-GMWNTs) as a novel pseudostationary phase in CE with diode array detection for the determination of phen...

Simultaneous determination of six phenolic constituents of Danshen injection in rat plasma by LC-ESI-MS and its application to a pharmacokinetic study.

Eur. J. Mass Spectrom. (Chichester, Eng.) 17(4) , 395-403, (2011)

Salvianolic acid A, salvianolic acid B, danshensu, protocatechuic aldehyde, rosmarinic acid and lithospermic acid are the six major active constituents in Danshen injection. In this study, a rapid, se...

In silico analysis and experimental validation of molecular mechanisms of salvianolic acid A-inhibited LPS-stimulated inflammation, in RAW264.7 macrophages.

Cell Prolif. 46(5) , 595-605, (2013)

The aim of this study was to explore mechanisms by which salvianolic acid A (SAA) revealed its anti-inflammatory activity, in lipopolysaccharide (LPS)-stimulated RAW264.7 cells.Nitric oxide (NO) conce...

 Synonyms

(2R)-3-(3,4-Dihydroxyphenyl)-2-{[(2E)-3-{2-[(E)-2-(3,4-dihydroxyphenyl)vinyl]-3,4-dihydroxyphenyl}-2-propenoyl]oxy}propanoic acid
Benzenepropanoic acid, α-[[(2E)-3-[2-[(E)-2-(3,4-dihydroxyphenyl)ethenyl]-3,4-dihydroxyphenyl]-1-oxo-2-propen-1-yl]oxy]-3,4-dihydroxy-, (αR)-
(2R)-3-(3,4-dihydroxyphenyl)-2-[(E)-3-[2-[(E)-2-(3,4-dihydroxyphenyl)ethenyl]-3,4-dihydroxyphenyl]prop-2-enoyl]oxypropanoic acid
(2R)-3-(3,4-Dihydroxyphenyl)-2-{[(2E)-3-{2-[(E)-2-(3,4-dihydroxyphenyl)vinyl]-3,4-dihydroxyphenyl}prop-2-enoyl]oxy}propanoic acid
Top Suppliers:I want be here






Get all suppliers and price by the below link:

Salvianolic acid A suppliers


Price: ¥624/10mg

Reference only. check more Salvianolic acid A price